Can we use 2 tc filter rules with the same prio

["Indunil Jayasooriya" <indunil75@xxxxxxxxx>]

Hi ALL, 

I am using below script for DOWNLOADING. it is only for HTTP and HTTPS. 

I have given the same prio for both. (i.e 

prio 1). 

pls see my script given below. (last 2 lines of the script where I have highlighted in BOLD letters)

Can I have 2 tc filter rules with the same prio? 

What is the proper method to write?

MY SCRIPT IS BELOW

#traffic shaping on eth1 (Downloading)

INTERFAZ_LAN=eth1
FULLBANDWIDTH=256
BANDWIDTH4LAN=64


tc qdisc del root dev $INTERFAZ_LAN

tc qdisc add dev $INTERFAZ_LAN root handle 1: htb r2q 4
tc class add dev $INTERFAZ_LAN parent 1: classid 1:2 htb rate "$FULLBANDWIDTH"Kbit
tc class add dev $INTERFAZ_LAN parent 1: classid 1:5 htb rate "$BANDWIDTH4LAN"Kbit
tc qdisc add dev $INTERFAZ_LAN parent 1:5 handle 5: sfq perturb 10
tc filter add dev $INTERFAZ_LAN parent 1: protocol ip prio 1    u32 match ip sport 80 0xffff match ip dst 
192.168.102.0/24    classid 1:5
tc filter add dev $INTERFAZ_LAN parent 1: protocol ip 

prio 1    u32 match ip sport 443 0xffff match ip dst 
192.168.102.0/24
    classid 1:5



YOUR COMMENTS NEEDED. 

-- 
Thank you
Indunil Jayasooriya
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc