tc and multiple ip on a device

[Vincent Dautremont <vdautrem@xxxxxxxxx>]

Hi,
i'm sort of testing a configuration and things are not working sa i  
planned.

i have the following network diagram: PC1 to 7 cnneced on the same  
ethernet hub.

PC1  PC2 PC 3 PC4 PC5 PC6 on network 192.168.5.0
PC6 and PC7 on network 192.168.1.0

so PC6 work as a router. in addition, PC6 is connected to both  
network on the same device eth0.


now on PC6, put a tbf on dev eth0 root with a rate 100ko/s

send data from PC1 to PC7.  is the data shaped by the tbf ? i'd say  
yes but it does not !!!
can someone explain me how ? is that normal ? would that happen too  
if PC6 was connected to both network with different devices ?

I did this test in virtualisation with these 7 machines on my  
macbookpro because i don't have the necessary hardware.
i think it doesn't change the initial problem but i'm ot 100% sure.

Thanks.
Vincent
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc