Re: [PATCH 13/17] KVM: PPC: Allow book3s_hv guests to use SMT processor modes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29.06.2011, at 12:23, Paul Mackerras wrote:

> This lifts the restriction that book3s_hv guests can only run one
> hardware thread per core, and allows them to use up to 4 threads
> per core on POWER7.  The host still has to run single-threaded.
> 
> This capability is advertised to qemu through a new KVM_CAP_PPC_SMT
> capability.  The return value of the ioctl querying this capability
> is the number of vcpus per virtual CPU core (vcore), currently 4.
> 
> To use this, the host kernel should be booted with all threads
> active, and then all the secondary threads should be offlined.
> This will put the secondary threads into nap mode.  KVM will then
> wake them from nap mode and use them for running guest code (while
> they are still offline).  To wake the secondary threads, we send
> them an IPI using a new xics_wake_cpu() function, implemented in
> arch/powerpc/sysdev/xics/icp-native.c.  In other words, at this stage
> we assume that the platform has a XICS interrupt controller and
> we are using icp-native.c to drive it.  Since the woken thread will
> need to acknowledge and clear the IPI, we also export the base
> physical address of the XICS registers using kvmppc_set_xics_phys()
> for use in the low-level KVM book3s code.
> 
> When a vcpu is created, it is assigned to a virtual CPU core.
> The vcore number is obtained by dividing the vcpu number by the
> number of threads per core in the host.  This number is exported
> to userspace via the KVM_CAP_PPC_SMT capability.  If qemu wishes
> to run the guest in single-threaded mode, it should make all vcpu
> numbers be multiples of the number of threads per core.
> 
> We distinguish three states of a vcpu: runnable (i.e., ready to execute
> the guest), blocked (that is, idle), and busy in host.  We currently
> implement a policy that the vcore can run only when all its threads
> are runnable or blocked.  This way, if a vcpu needs to execute elsewhere
> in the kernel or in qemu, it can do so without being starved of CPU
> by the other vcpus.
> 
> When a vcore starts to run, it executes in the context of one of the
> vcpu threads.  The other vcpu threads all go to sleep and stay asleep
> until something happens requiring the vcpu thread to return to qemu,
> or to wake up to run the vcore (this can happen when another vcpu
> thread goes from busy in host state to blocked).
> 
> It can happen that a vcpu goes from blocked to runnable state (e.g.
> because of an interrupt), and the vcore it belongs to is already
> running.  In that case it can start to run immediately as long as
> the none of the vcpus in the vcore have started to exit the guest.
> We send the next free thread in the vcore an IPI to get it to start
> to execute the guest.  It synchronizes with the other threads via
> the vcore->entry_exit_count field to make sure that it doesn't go
> into the guest if the other vcpus are exiting by the time that it
> is ready to actually enter the guest.
> 
> Note that there is no fixed relationship between the hardware thread
> number and the vcpu number.  Hardware threads are assigned to vcpus
> as they become runnable, so we will always use the lower-numbered
> hardware threads in preference to higher-numbered threads if not all
> the vcpus in the vcore are runnable, regardless of which vcpus are
> runnable.
> 
> Signed-off-by: Paul Mackerras <paulus@xxxxxxxxx>

[...]

> diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
> index 5616e39..0d6d569 100644
> --- a/arch/powerpc/include/asm/kvm_host.h
> +++ b/arch/powerpc/include/asm/kvm_host.h
> @@ -25,10 +25,14 @@
> #include <linux/interrupt.h>
> #include <linux/types.h>
> #include <linux/kvm_types.h>
> +#include <linux/threads.h>
> +#include <linux/spinlock.h>
> #include <linux/kvm_para.h>
> #include <asm/kvm_asm.h>
> +#include <asm/processor.h>
> 
> -#define KVM_MAX_VCPUS 1
> +#define KVM_MAX_VCPUS		NR_CPUS
> +#define KVM_MAX_VCORES		NR_CPUS

Hey Paul,

While trying to trace down why some BookE systems were only able to do as many guest vcpus as there were host cpus available, we stumbled over this one. Is there any limitation on book3s_hv that would limit the available vcpus to configured host vcpus? Or could we just make this a static define like on x86?


Alex

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux