Re: [PATCH 3/3] Stop dropping so many RX packets in tap (v2)

[Dor Laor <dor.laor@xxxxxxxxxxxx>]

On Sun, 2008-05-04 at 15:21 -0500, Anthony Liguori wrote:
> Normally, tap always reads packets and simply lets the client drop them if it
> cannot receive them.  For virtio-net, this results in massive packet loss and
> about an 80% performance loss in TCP throughput.
> 
> This patch modifies qemu_send_packet() to only deliver a packet to a VLAN
> client if it doesn't have a fd_can_read method or the fd_can_read method
> indicates that it can receive packets.  We also return a status of whether
> any clients were able to receive the packet.
> 
> If no clients were able to receive a packet, we buffer the packet until a
> client indicates that it can receive packets again.
> 
> This patch also modifies the tap code to only read from the tap fd if at least
> one client on the VLAN is able to receive a packet.
> 
> Finally, this patch changes the tap code to drain all possible packets from
> the tap device when the tap fd is readable.
> 
> Signed-off-by: Anthony Liguori <aliguori@xxxxxxxxxx>

Patchset looks good and reduces some nasty hacks. It probably also
improves other devices like e1000 et al.
Cheers,
Dor


-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
_______________________________________________
kvm-devel mailing list
kvm-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/kvm-devel