|
|
|
[PATCH V5 10/18] MIPS: Loongson: Add Loongson-3 Kconfig options. | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
|
|
Added Kconfig options include: Loongson-3 CPU and machine definition, UEFI-like firmware interface, HT-linked PCI, big memory support, etc. Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx> Signed-off-by: Hongliang Tao <taohl@xxxxxxxxxx> Signed-off-by: Hua Yan <yanh@xxxxxxxxxx> --- arch/mips/Kconfig | 22 ++++++++++++++++++ arch/mips/loongson/Kconfig | 52 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 74 insertions(+), 0 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 331d574..9e8e86c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1571,6 +1571,16 @@ config CPU_LOONGSON2 select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM +config CPU_LOONGSON3 + bool "Loongson 3 CPU" + depends on SYS_HAS_CPU_LOONGSON3 + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + help + The Loongson 3 processor implements the MIPS III instruction set + with many extensions. + config CPU_LOONGSON1 bool select CPU_MIPS32 @@ -1597,6 +1607,9 @@ config SYS_HAS_CPU_LOONGSON2F select CPU_SUPPORTS_ADDRWINCFG if 64BIT select CPU_SUPPORTS_UNCACHED_ACCELERATED +config SYS_HAS_CPU_LOONGSON3 + bool + config SYS_HAS_CPU_LOONGSON1B bool @@ -2399,6 +2412,15 @@ config PCI your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, say Y, otherwise N. +config HT_PCI + bool "Support for HT-linked PCI" + select PCI_DOMAINS + help + Loongson family machines use Hyper-Transport bus for inter-core + connection and device connection. The PCI bus is a subordinate + linked at HT. Choose Y unless you are using Loongson 2E/2F based + machines. + config PCI_DOMAINS bool diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index 263beb9..dd951b8 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -59,6 +59,33 @@ config LEMOTE_MACH2F These family machines include fuloong2f mini PC, yeeloong2f notebook, LingLoong allinone PC and so forth. + +config LEMOTE_MACH3A + bool "Lemote Loongson 3A family machines" + select ARCH_SPARSEMEM_ENABLE + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select GENERIC_HARDIRQS_NO__DO_IRQ + select BOOT_ELF32 + select BOARD_SCACHE + select CSRC_R4K + select CEVT_R4K + select CPU_HAS_WB + select HW_HAS_PCI + select ISA + select I8259 + select IRQ_CPU + select SYS_HAS_CPU_LOONGSON3 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select LOONGSON_MC146818 + select UEFI_FIRMWARE_INTERFACE + help + Lemote Loongson 3A family machines utilize the 3A revision of + Loongson processor and RS780/SBX00 chipset. endchoice config CS5536 @@ -86,8 +113,33 @@ config LOONGSON_UART_BASE default y depends on EARLY_PRINTK || SERIAL_8250 +config LOONGSON_BIGMEM + bool "Soft IOMMU Support for Big Memory (>4GB)" + depends on CPU_LOONGSON3 + select SWIOTLB + select ZONE_DMA32 + +config IOMMU_HELPER + bool + +config NEED_SG_DMA_LENGTH + bool + +config SWIOTLB + bool + select IOMMU_HELPER + select NEED_SG_DMA_LENGTH + select NEED_DMA_MAP_STATE + config LOONGSON_MC146818 bool default n +config ARCH_SPARSEMEM_ENABLE + bool + select SPARSEMEM_STATIC + +config UEFI_FIRMWARE_INTERFACE + bool + endif # MACH_LOONGSON -- 1.7.7.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[Other Archives] [Linux Kernel Newbies] [Linux Driver Development] [Linux Kbuild] [Fedora Kernel] [Linux Kernel Testers] [Linux SH] [Linux Omap] [Linux Tape] [Linux Input] [Linux Kernel Janitors] [Linux Kernel Packagers] [Linux Doc] [Linux Man Pages] [Linux API] [Linux Memory Management] [Linux Modules] [Linux Standards] [Kernel Announce] [Netdev] [Git] [Linux PCI] Linux CAN Development [Linux I2C] [Linux RDMA] [Linux NUMA] [Netfilter] [Netfilter Devel] [SELinux] [Bugtraq] [FIO] [Linux Perf Users] [Linux Serial] [Linux PPP] [Linux ISDN] [Linux Next] [Kernel Stable Commits] [Linux Tip Commits] [Kernel MM Commits] [Linux Security Module] [AutoFS] [Filesystem Development] [Ext3 Filesystem] [Linux bcache] [Ext4 Filesystem] [Linux BTRFS] [Linux CEPH Filesystem] [Linux XFS] [XFS] [Linux NFS] [Linux CIFS] [Ecryptfs] [Linux NILFS] [Linux Cachefs] [Reiser FS] [Initramfs] [Linux FB Devel] [Linux OpenGL] [DRI Devel] [Fastboot] [Linux RT Users] [Linux RT Stable] [eCos] [Corosync] [Linux Clusters] [LVS Devel] [Hot Plug] [Linux Virtualization] [KVM] [KVM PPC] [KVM ia64] [Linux Containers] [Linux Hexagon] [Linux Cgroups] [Util Linux] [Wireless] [Linux Bluetooth] [Bluez Devel] [Ethernet Bridging] [Embedded Linux] [Barebox] [Linux MMC] [Linux IIO] [Sparse] [Smatch] [Linux Arch] [x86 Platform Driver] [Linux ACPI] [Linux IBM ACPI] [LM Sensors] [CPU Freq] [Linux Power Management] [Linmodems] [Linux DCCP] [Linux SCTP] [ALSA Devel] [Linux USB] [Linux PA RISC] [Linux Samsung SOC] [MIPS Linux] [IBM S/390 Linux] [ARM Linux] [ARM Kernel] [ARM MSM] [Tegra Devel] [Sparc Linux] [Linux Security] [Linux Sound] [Linux Media] [Video 4 Linux] [Linux IRDA Users] [Linux for the blind] [Linux RAID] [Linux ATA RAID] [Device Mapper] [Linux SCSI] [SCSI Target Devel] [Linux SCSI Target Infrastructure] [Linux IDE] [Linux SMP] [Linux AXP] [Linux Alpha] [Linux M68K] [Linux ia64] [Linux 8086] [Linux x86_64] [Linux Config] [Linux Apps] [Linux MSDOS] [Linux X.25] [Linux Crypto] [DM Crypt] [Linux Trace Users] [Linux Btrace] [Linux Watchdog] [Utrace Devel] [Linux C Programming] [Linux Assembly] [Dash] [DWARVES] [Hail Devel] [Linux Kernel Debugger] [Linux gcc] [Gcc Help] [X.Org] [Wine]
![]() |
![]() |
[Older Kernel Discussion] [Yosemite National Park Forum] [Large Format Photos] [Gimp] [Yosemite Photos] [Stuff]