[PATCH] regulator: core: request only valid gpio pins for regulator enable

[Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>]

Commit 65f735082de3 ("regulator: core: Add core support for GPIO controlled
enable lines") introduced enable gpio entry in regulator configuration
structure. Some drivers use '-1' as a placeholder for marking that such
gpio line is not available, because '0' is considered as a valid gpio
number. This patch fixes initialization of such drivers (like MAX8952
on UniversalC210 board), when '-1' is provided as enable gpio pin in the
regulator's platform data.

Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---
 drivers/regulator/core.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index f092588..4838531 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3217,7 +3217,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 
 	dev_set_drvdata(&rdev->dev, rdev);
 
-	if (config->ena_gpio) {
+	if (config->ena_gpio && gpio_is_valid(config->ena_gpio)) {
 		ret = gpio_request_one(config->ena_gpio,
 				       GPIOF_DIR_OUT | config->ena_gpio_flags,
 				       rdev_get_name(rdev));
-- 
1.7.1.569.g6f426

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/