Re: [PATCH] leds: Add LED driver for lm3554 chip

[Shuah Khan <shuahkhan@xxxxxxxxx>]

On Fri, 2012-07-13 at 18:11 +0900, G.Shark Jeong wrote:
> From: "G.Shark Jeong" <gshark.jeong@xxxxxxxxx>
> 
> LM3554 :
> The LM3554 is a 2 MHz fixed-frequency synchronous boost
> converter with 1.2A dual high side led drivers.
> Datasheet: www.ti.com
> 
> Signed-off-by: G.Shark Jeong <gshark.jeong@xxxxxxxxx>
> ---
>  drivers/leds/Kconfig                      |    8 +
>  drivers/leds/Makefile                     |    1 +
>  drivers/leds/leds-lm3554.c                |  324 +++++++++++++++++++++++++++++
>  include/linux/platform_data/leds-lm3554.h |   66 ++++++
>  4 files changed, 399 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/leds/leds-lm3554.c
>  create mode 100644 include/linux/platform_data/leds-lm3554.h
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 12b2b55..ad54bc2 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -415,6 +415,14 @@ config LEDS_MAX8997
>  	  This option enables support for on-chip LED drivers on
>  	  MAXIM MAX8997 PMIC.
>  
> +config LEDS_LM3554
> +	tristate "LED support for LM3554"
> +	depends on LEDS_CLASS && I2C
> +	select REGMAP_I2C
> +	help
> +	  This option enables support for LEDs connected to LM3554.
> +	  LM3554 includes Torch, Flash and Indicator functions.
> +

There are two other leds drivers leds-lm3556.c for Texas Instruments
LM3556, and leds-lm3533.c for LM3533 chip in the leds sub-system. Are
these chip-sets that different that a special driver is needed? Can they
be handled by one driver that can handle chip specific variations? I am
speculating based on the minor number change in the chip-set numbering,
maybe they are not that different to warrant a new driver.

-- Shuah


>  config LEDS_OT200
>  	tristate "LED support for the Bachmann OT200"
>  	depends on LEDS_CLASS && HAS_IOMEM
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index f8958cd..19903ed 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -47,6 +47,7 @@ obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
>  obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
>  obj-$(CONFIG_LEDS_RENESAS_TPU)		+= leds-renesas-tpu.o
>  obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
> +obj-$(CONFIG_LEDS_LM3554)		+= leds-lm3554.o
>  
>  # LED SPI Drivers
>  obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
> diff --git a/drivers/leds/leds-lm3554.c b/drivers/leds/leds-lm3554.c
> new file mode 100644
> index 0000000..4f53086
> --- /dev/null
> +++ b/drivers/leds/leds-lm3554.c
> @@ -0,0 +1,324 @@
> +/*
> +* Simple driver for Texas Instruments LM3554 LED Flash driver chip
> +* Copyright (C) 2012 Texas Instruments
> +*
> +* This program is free software; you can redistribute it and/or modify
> +* it under the terms of the GNU General Public License version 2 as
> +* published by the Free Software Foundation.
> +*
> +*/
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/gpio.h>
> +#include <linux/leds.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/fs.h>
> +#include <linux/regmap.h>
> +#include <linux/platform_data/leds-lm3554.h>
> +
> +#define REG_TORCH		(0xA0)
> +#define REG_FLASH		(0xB0)
> +#define REG_FLASH_TIME		(0xC0)
> +#define REG_FLAG		(0xD0)
> +#define REG_CONF1		(0xE0)
> +#define REG_CONF2		(0xF0)
> +#define REG_GPIO		(0x20)
> +#define REG_VIN_MON		(0x80)
> +#define REG_MAX			REG_VIN_MON
> +
> +enum lm3554_mode {
> +	MODE_SHDN = 0,
> +	MODE_INDIC,
> +	MODE_TORCH,
> +	MODE_FLASH,
> +	MODE_VOUT,
> +	MODE_VOUT_INDIC,
> +	MODE_VOUT_TORCH,
> +	MODE_VOUT_FLASH,
> +};
> +
> +struct lm3554_chip_data {
> +	struct device *dev;
> +
> +	struct led_classdev cdev_flash;
> +	struct led_classdev cdev_torch;
> +	struct led_classdev cdev_indicator;
> +
> +	struct lm3554_platform_data *pdata;
> +
> +	struct mutex lock;
> +	struct regmap *regmap;
> +	unsigned int last_flag;
> +};
> +
> +/* chip initialize */
> +static int __devinit lm3554_chip_init(struct lm3554_chip_data *chip)
> +{
> +	int ret;
> +	unsigned int reg_val;
> +	struct lm3554_platform_data *pdata = chip->pdata;
> +
> +	/* input and output pins configuration */
> +	reg_val = pdata->pin_strobe | pdata->pin_tx1
> +	    | pdata->pin_tx2 | pdata->ledi_pin;
> +	ret = regmap_update_bits(chip->regmap, REG_CONF1, 0xAC, reg_val);
> +	if (ret < 0)
> +		goto out;
> +
> +	return ret;
> +out:
> +	dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
> +	return ret;
> +}
> +
> +/* chip control */
> +static void lm3554_control(struct lm3554_chip_data *chip,
> +			   u8 brightness, enum lm3554_mode opmode)
> +{
> +	int ret;
> +	unsigned int reg_val;
> +	struct lm3554_platform_data *pdata = chip->pdata;
> +
> +	ret = regmap_read(chip->regmap, REG_FLAG, &chip->last_flag);
> +	if (ret < 0)
> +		goto out;
> +	if (chip->last_flag)
> +		dev_info(chip->dev, "LM3554 Last FLAG is 0x%x\n",
> +			 chip->last_flag);
> +	/* brightness 0 means shutdown */
> +	if (!brightness)
> +		opmode = MODE_SHDN;
> +
> +	switch (opmode) {
> +	case MODE_TORCH:
> +		if (pdata->pin_tx1 == LM3554_TX1_HW_TORCH) {
> +			ret = regmap_update_bits(chip->regmap,
> +						 REG_CONF1, 0x80, 0x80);
> +			if (ret < 0)
> +				goto out;
> +			opmode = MODE_SHDN;
> +		}
> +		ret = regmap_update_bits(chip->regmap,
> +					 REG_TORCH, 0x38,
> +					 (brightness - 1) << 3);
> +		if (ret < 0)
> +			goto out;
> +		break;
> +
> +	case MODE_FLASH:
> +		if (pdata->pin_strobe == LM3554_STROBE_EN) {
> +			ret = regmap_update_bits(chip->regmap,
> +						 REG_CONF1, 0x84, 0x04);
> +			if (ret < 0)
> +				goto out;
> +			opmode = MODE_SHDN;
> +		}
> +		ret = regmap_update_bits(chip->regmap, REG_FLASH, 0x78,
> +					 (brightness - 1) << 3);
> +		if (ret < 0)
> +			goto out;
> +		break;
> +
> +	case MODE_INDIC:
> +		if (pdata->ledi_pin == LM3554_LEDI_INDICATOR) {
> +			ret = regmap_update_bits(chip->regmap,
> +						 REG_CONF1, 0x08, 0x08);
> +			if (ret < 0)
> +				goto out;
> +			opmode = MODE_SHDN;
> +		}
> +		ret = regmap_update_bits(chip->regmap, REG_TORCH, 0x38,
> +					 (brightness - 1) << 3);
> +		if (ret < 0)
> +			goto out;
> +		break;
> +	case MODE_SHDN:
> +		break;
> +	default:
> +		return;
> +	}
> +
> +	/* set voltage out mode */
> +	reg_val = opmode | pdata->vout_mode;
> +	ret = regmap_update_bits(chip->regmap, REG_TORCH, 0x07, reg_val);
> +	if (ret < 0)
> +		goto out;
> +	return;
> +out:
> +	dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
> +	return;
> +}
> +
> +/* torch */
> +static void lm3554_torch_brightness_set(struct led_classdev *cdev,
> +					enum led_brightness brightness)
> +{
> +	struct lm3554_chip_data *chip =
> +	    container_of(cdev, struct lm3554_chip_data, cdev_torch);
> +
> +	mutex_lock(&chip->lock);
> +	lm3554_control(chip, brightness, MODE_TORCH);
> +	mutex_unlock(&chip->lock);
> +	return;
> +}
> +
> +/* flash */
> +static void lm3554_strobe_brightness_set(struct led_classdev *cdev,
> +					 enum led_brightness brightness)
> +{
> +	struct lm3554_chip_data *chip =
> +	    container_of(cdev, struct lm3554_chip_data, cdev_flash);
> +
> +	mutex_lock(&chip->lock);
> +	lm3554_control(chip, brightness, MODE_FLASH);
> +	mutex_unlock(&chip->lock);
> +	return;
> +}
> +
> +/* indicator */
> +static void lm3554_indicator_brightness_set(struct led_classdev *cdev,
> +					    enum led_brightness brightness)
> +{
> +	struct lm3554_chip_data *chip =
> +	    container_of(cdev, struct lm3554_chip_data, cdev_indicator);
> +
> +	mutex_lock(&chip->lock);
> +	lm3554_control(chip, brightness, MODE_INDIC);
> +	mutex_unlock(&chip->lock);
> +	return;
> +}
> +
> +static const struct regmap_config lm3554_regmap = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = REG_MAX,
> +};
> +
> +/* module initialize */
> +static int __devinit lm3554_probe(struct i2c_client *client,
> +				  const struct i2c_device_id *id)
> +{
> +	int ret;
> +	struct lm3554_chip_data *chip;
> +	struct lm3554_platform_data *pdata = client->dev.platform_data;
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> +		dev_err(&client->dev, "i2c functionality check fail.\n");
> +		return -EOPNOTSUPP;
> +	}
> +
> +	if (pdata == NULL) {
> +		dev_err(&client->dev, "Needs Platform Data.\n");
> +		return -ENODATA;
> +	}
> +
> +	chip =
> +	    devm_kzalloc(&client->dev, sizeof(struct lm3554_chip_data),
> +			 GFP_KERNEL);
> +	if (!chip)
> +		return -ENOMEM;
> +
> +	chip->dev = &client->dev;
> +	chip->pdata = pdata;
> +
> +	chip->regmap = /*devm_ */ regmap_init_i2c(client, &lm3554_regmap);
> +	if (IS_ERR(chip->regmap)) {
> +		ret = PTR_ERR(chip->regmap);
> +		dev_err(&client->dev,
> +			"Failed to allocate register map: %d\n", ret);
> +		return ret;
> +	}
> +
> +	mutex_init(&chip->lock);
> +	i2c_set_clientdata(client, chip);
> +
> +	ret = lm3554_chip_init(chip);
> +	if (ret < 0)
> +		goto err_chip_init;
> +
> +	/* flash */
> +	chip->cdev_flash.name = "flash";
> +	chip->cdev_flash.max_brightness = 16;
> +	chip->cdev_flash.brightness_set = lm3554_strobe_brightness_set;
> +	ret = led_classdev_register((struct device *)
> +				    &client->dev, &chip->cdev_flash);
> +	if (ret < 0)
> +		goto err_chip_init;
> +	/* torch */
> +	chip->cdev_torch.name = "torch";
> +	chip->cdev_torch.max_brightness = 8;
> +	chip->cdev_torch.brightness_set = lm3554_torch_brightness_set;
> +	ret = led_classdev_register((struct device *)
> +				    &client->dev, &chip->cdev_torch);
> +	if (ret < 0)
> +		goto err_chip_init;
> +	/* indicator */
> +	chip->cdev_indicator.name = "indicator";
> +	chip->cdev_indicator.max_brightness = 4;
> +	chip->cdev_indicator.brightness_set = lm3554_indicator_brightness_set;
> +	ret = led_classdev_register((struct device *)
> +				    &client->dev, &chip->cdev_indicator);
> +	if (ret < 0)
> +		goto err_chip_init;
> +
> +	dev_info(chip->dev, "lm3554 initialize OK\n");
> +
> +	return 0;
> +
> +err_chip_init:
> +	if (&chip->cdev_indicator)
> +		led_classdev_unregister(&chip->cdev_indicator);
> +	if (&chip->cdev_torch)
> +		led_classdev_unregister(&chip->cdev_torch);
> +	if (&chip->cdev_flash)
> +		led_classdev_unregister(&chip->cdev_flash);
> +
> +	dev_err(chip->dev, "lm3554 initialize fail\n");
> +	return ret;
> +}
> +
> +static int __devexit lm3554_remove(struct i2c_client *client)
> +{
> +	int ret;
> +	struct lm3554_chip_data *chip = i2c_get_clientdata(client);
> +
> +	if (&chip->cdev_indicator)
> +		led_classdev_unregister(&chip->cdev_indicator);
> +	if (&chip->cdev_torch)
> +		led_classdev_unregister(&chip->cdev_torch);
> +	if (&chip->cdev_flash)
> +		led_classdev_unregister(&chip->cdev_flash);
> +	ret = regmap_write(chip->regmap, REG_TORCH, 0x00);
> +	if (ret < 0)
> +		dev_err(chip->dev,
> +			"%s:i2c access fail to register\n", __func__);
> +	dev_info(chip->dev, "lm3554 is removed");
> +	return 0;
> +}
> +
> +static const struct i2c_device_id lm3554_id[] = {
> +	{LM3554_NAME, 0},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, lm3554_id);
> +
> +static struct i2c_driver lm3554_i2c_driver = {
> +	.driver = {
> +		   .name = LM3554_NAME,
> +		   .owner = THIS_MODULE,
> +		   .pm = NULL,
> +		   },
> +	.probe = lm3554_probe,
> +	.remove = __devexit_p(lm3554_remove),
> +	.id_table = lm3554_id,
> +};
> +
> +module_i2c_driver(lm3554_i2c_driver);
> +
> +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3554");
> +MODULE_AUTHOR("Daniel Jeong <daniel.jeong@xxxxxx>");
> +MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@xxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/platform_data/leds-lm3554.h b/include/linux/platform_data/leds-lm3554.h
> new file mode 100644
> index 0000000..883cfbd
> --- /dev/null
> +++ b/include/linux/platform_data/leds-lm3554.h
> @@ -0,0 +1,66 @@
> +/*
> + * Copyright (C) 2012 Texas Instruments
> + *
> + * License Terms: GNU General Public License v2
> + *
> + * Simple driver for Texas Instruments LM3554 LED driver chip
> + *
> + * Author: Daniel Jeong <daniel.jeong@xxxxxxxxx>
> + *	   G.Shark Jeong <gshark.jeong@xxxxxxxxx>
> + */
> +
> +#ifndef _LINUX_LED_FLASH_LM3554_H__
> +#define _LINUX_LED_FLASH_LM3554_H__
> +
> +#define LM3554_NAME "leds-lm3554"
> +
> +/* input pin configuration */
> +enum lm3554_strobe {
> +	LM3554_STROBE_DISABLE = 0x04,
> +	LM3554_STROBE_EN = 0x00,
> +};
> +
> +/* input pin configuration */
> +enum lm3554_tx1 {
> +	LM3554_TX1_FL_INT = 0x00,
> +	LM3554_TX1_HW_TORCH = 0x80,
> +	LM3554_TX1_GPIO = 0x10,
> +};
> +
> +/* input pin configuration */
> +enum lm3554_tx2 {
> +	LM3554_TX2_EMVM = 0x00,
> +	LM3554_TX2_PAM_SYNC = 0x20,
> +	LM3554_TX2_GPIO = 0x10,
> +};
> +
> +/* output pin configuration */
> +enum lm3554_ledi {
> +	LM3554_LEDI_INDICATOR = 0x00,
> +	LM3554_LEDI_THERMAL_COMP = 0x08,
> +};
> +
> +enum lm3554_vout {
> +	LM3554_VOUTMODE_DISABLE = 0x00,
> +	LM3554_VOUTMODE_ENABLE = 0x04,
> +};
> +
> +/**
> + * struct lm3554_platform_data
> + * @strobe : strobe input enable
> + * @pin_tx1 : input pin tx1/torch/gpio1
> + * @pin_tx2 : input pin envm/tx2/gpio2
> + * @ledi_pin : output pin ledi/ntc
> + * @vout_mode : voltage out mode
> + */
> +struct lm3554_platform_data {
> +	enum lm3554_strobe pin_strobe;
> +
> +	enum lm3554_tx1 pin_tx1;
> +	enum lm3554_tx2 pin_tx2;
> +
> +	enum lm3554_ledi ledi_pin;
> +	enum lm3554_vout vout_mode;
> +};
> +
> +#endif /* _LINUX_LED_FLASH_LM3554_H__ */


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/