|
|
|
[PATCH 1/3] PCI: allow P2P bridge windows starting at PCI bus address zero | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
|
|
cd81e1ea1a4c added checks that prevent us from using P2P bridge windows
that start at PCI bus address zero. The reason was to "prevent us from
overwriting resources that are unassigned."
But generic code should allow address zero in both BARs and bridge
windows, so I think that commit was a mistake.
Windows at bus address zero are legal and likely to exist on machines with
an offset between bus addresses and CPU addresses. For example, in the
following hypothetical scenario, the bridge at 00:01.0 has a window at bus
address zero and the device at 01:00.0 has a BAR at bus address zero, and
I think both are perfectly valid:
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x100000000-0x1ffffffff] (bus address [0x00000000-0xffffffff])
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0x100000000-0x100ffffff]
pci 0000:01:00.0: reg 10: [mem 0x100000000-0x100ffffff]
CC: Yinghai Lu <yinghai@xxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
drivers/pci/probe.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 658ac97..9c5d2a9 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -287,7 +287,7 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child)
limit |= (io_limit_hi << 16);
}
- if (base && base <= limit) {
+ if (base <= limit) {
res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
res2.flags = res->flags;
region.start = base;
@@ -314,7 +314,7 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
- if (base && base <= limit) {
+ if (base <= limit) {
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
region.start = base;
region.end = limit + 0xfffff;
@@ -360,7 +360,7 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
#endif
}
}
- if (base && base <= limit) {
+ if (base <= limit) {
res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
IORESOURCE_MEM | IORESOURCE_PREFETCH;
if (res->flags & PCI_PREF_RANGE_TYPE_64)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Other Archives] [Linux Kernel Newbies] [Linux Driver Development] [Linux Kbuild] [Fedora Kernel] [Linux Kernel Testers] [Linux SH] [Linux Omap] [Linux Tape] [Linux Input] [Linux Kernel Janitors] [Linux Kernel Packagers] [Linux Doc] [Linux Man Pages] [Linux API] [Linux Memory Management] [Linux Modules] [Linux Standards] [Kernel Announce] [Netdev] [Git] [Linux PCI] Linux CAN Development [Linux I2C] [Linux RDMA] [Linux NUMA] [Netfilter] [Netfilter Devel] [SELinux] [Bugtraq] [FIO] [Linux Perf Users] [Linux Serial] [Linux PPP] [Linux ISDN] [Linux Next] [Kernel Stable Commits] [Linux Tip Commits] [Kernel MM Commits] [Linux Security Module] [AutoFS] [Filesystem Development] [Ext3 Filesystem] [Linux bcache] [Ext4 Filesystem] [Linux BTRFS] [Linux CEPH Filesystem] [Linux XFS] [XFS] [Linux NFS] [Linux CIFS] [Ecryptfs] [Linux NILFS] [Linux Cachefs] [Reiser FS] [Initramfs] [Linux FB Devel] [Linux OpenGL] [DRI Devel] [Fastboot] [Linux RT Users] [Linux RT Stable] [eCos] [Corosync] [Linux Clusters] [LVS Devel] [Hot Plug] [Linux Virtualization] [KVM] [KVM PPC] [KVM ia64] [Linux Containers] [Linux Hexagon] [Linux Cgroups] [Util Linux] [Wireless] [Linux Bluetooth] [Bluez Devel] [Ethernet Bridging] [Embedded Linux] [Barebox] [Linux MMC] [Linux IIO] [Sparse] [Smatch] [Linux Arch] [x86 Platform Driver] [Linux ACPI] [Linux IBM ACPI] [LM Sensors] [CPU Freq] [Linux Power Management] [Linmodems] [Linux DCCP] [Linux SCTP] [ALSA Devel] [Linux USB] [Linux PA RISC] [Linux Samsung SOC] [MIPS Linux] [IBM S/390 Linux] [ARM Linux] [ARM Kernel] [ARM MSM] [Tegra Devel] [Sparc Linux] [Linux Security] [Linux Sound] [Linux Media] [Video 4 Linux] [Linux IRDA Users] [Linux for the blind] [Linux RAID] [Linux ATA RAID] [Device Mapper] [Linux SCSI] [SCSI Target Devel] [Linux SCSI Target Infrastructure] [Linux IDE] [Linux SMP] [Linux AXP] [Linux Alpha] [Linux M68K] [Linux ia64] [Linux 8086] [Linux x86_64] [Linux Config] [Linux Apps] [Linux MSDOS] [Linux X.25] [Linux Crypto] [DM Crypt] [Linux Trace Users] [Linux Btrace] [Linux Watchdog] [Utrace Devel] [Linux C Programming] [Linux Assembly] [Dash] [DWARVES] [Hail Devel] [Linux Kernel Debugger] [Linux gcc] [Gcc Help] [X.Org] [Wine]
![]() |
![]() |
[Older Kernel Discussion] [Yosemite National Park Forum] [Large Format Photos] [Gimp] [Yosemite Photos] [Stuff]