[PATCH] uprobes: teach build_probe_list() to consider the range

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Currently build_probe_list() builds the list of all uprobes attached
to the given inode, and the caller should filter out those who don't
fall into the [start,end) range, this is sub-optimal.

This patch turns find_least_offset_node() into find_node_in_range()
which returns the first node inside the [min,max] range, and changes
build_probe_list() to use this node as a starting point for rb_prev()
and rb_next() to find all other nodes the caller needs. The resulting
list is no longer sorted but we do not care.

This can speed up both build_probe_list() and the callers, but there
is another reason to introduce find_node_in_range(). It can be used
to figure out whether the given vma has uprobes or not, this will be
needed soon.

While at it, shift INIT_LIST_HEAD(tmp_list) into build_probe_list().

Signed-off-by: Oleg Nesterov <oleg@xxxxxxxxxx>
---
 kernel/events/uprobes.c |  103 +++++++++++++++++++++++------------------------
 1 files changed, 50 insertions(+), 53 deletions(-)

diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 6194edb..c825404 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -939,59 +939,66 @@ void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consume
 		put_uprobe(uprobe);
 }
 
-/*
- * Of all the nodes that correspond to the given inode, return the node
- * with the least offset.
- */
-static struct rb_node *find_least_offset_node(struct inode *inode)
+static struct rb_node *
+find_node_in_range(struct inode *inode, loff_t min, loff_t max)
 {
-	struct uprobe u = { .inode = inode, .offset = 0};
 	struct rb_node *n = uprobes_tree.rb_node;
-	struct rb_node *close_node = NULL;
-	struct uprobe *uprobe;
-	int match;
 
 	while (n) {
-		uprobe = rb_entry(n, struct uprobe, rb_node);
-		match = match_uprobe(&u, uprobe);
-
-		if (uprobe->inode == inode)
-			close_node = n;
+		struct uprobe *u = rb_entry(n, struct uprobe, rb_node);
 
-		if (!match)
-			return close_node;
-
-		if (match < 0)
+		if (inode < u->inode) {
 			n = n->rb_left;
-		else
+		} else if (inode > u->inode) {
 			n = n->rb_right;
+		} else {
+			if (max < u->offset)
+				n = n->rb_left;
+			else if (min > u->offset)
+				n = n->rb_right;
+			else
+				break;
+		}
 	}
 
-	return close_node;
+	return n;
 }
 
 /*
- * For a given inode, build a list of probes that need to be inserted.
+ * For a given range in vma, build a list of probes that need to be inserted.
  */
-static void build_probe_list(struct inode *inode, struct list_head *head)
+static void build_probe_list(struct inode *inode,
+				struct vm_area_struct *vma,
+				unsigned long start, unsigned long end,
+				struct list_head *head)
 {
-	struct uprobe *uprobe;
+	loff_t min, max;
 	unsigned long flags;
-	struct rb_node *n;
-
-	spin_lock_irqsave(&uprobes_treelock, flags);
-
-	n = find_least_offset_node(inode);
+	struct rb_node *n, *t;
+	struct uprobe *u;
 
-	for (; n; n = rb_next(n)) {
-		uprobe = rb_entry(n, struct uprobe, rb_node);
-		if (uprobe->inode != inode)
-			break;
+	INIT_LIST_HEAD(head);
+	min = ((loff_t)vma->vm_pgoff << PAGE_SHIFT) + start - vma->vm_start;
+	max = min + (end - start) - 1;
 
-		list_add(&uprobe->pending_list, head);
-		atomic_inc(&uprobe->ref);
+	spin_lock_irqsave(&uprobes_treelock, flags);
+	n = find_node_in_range(inode, min, max);
+	if (n) {
+		for (t = n; t; t = rb_prev(t)) {
+			u = rb_entry(t, struct uprobe, rb_node);
+			if (u->inode != inode || u->offset < min)
+				break;
+			list_add(&u->pending_list, head);
+			atomic_inc(&u->ref);
+		}
+		for (t = n; (t = rb_next(t)); ) {
+			u = rb_entry(t, struct uprobe, rb_node);
+			if (u->inode != inode || u->offset > max)
+				break;
+			list_add(&u->pending_list, head);
+			atomic_inc(&u->ref);
+		}
 	}
-
 	spin_unlock_irqrestore(&uprobes_treelock, flags);
 }
 
@@ -1021,9 +1028,8 @@ int uprobe_mmap(struct vm_area_struct *vma)
 	if (!inode)
 		return 0;
 
-	INIT_LIST_HEAD(&tmp_list);
 	mutex_lock(uprobes_mmap_hash(inode));
-	build_probe_list(inode, &tmp_list);
+	build_probe_list(inode, vma, vma->vm_start, vma->vm_end, &tmp_list);
 
 	ret = 0;
 	count = 0;
@@ -1032,11 +1038,6 @@ int uprobe_mmap(struct vm_area_struct *vma)
 		if (!ret) {
 			loff_t vaddr = vma_address(vma, uprobe->offset);
 
-			if (vaddr < vma->vm_start || vaddr >= vma->vm_end) {
-				put_uprobe(uprobe);
-				continue;
-			}
-
 			ret = install_breakpoint(uprobe, vma->vm_mm, vma, vaddr);
 			/*
 			 * We can race against uprobe_register(), see the
@@ -1092,21 +1093,17 @@ void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned lon
 	if (!inode)
 		return;
 
-	INIT_LIST_HEAD(&tmp_list);
 	mutex_lock(uprobes_mmap_hash(inode));
-	build_probe_list(inode, &tmp_list);
+	build_probe_list(inode, vma, start, end, &tmp_list);
 
 	list_for_each_entry_safe(uprobe, u, &tmp_list, pending_list) {
 		loff_t vaddr = vma_address(vma, uprobe->offset);
-
-		if (vaddr >= start && vaddr < end) {
-			/*
-			 * An unregister could have removed the probe before
-			 * unmap. So check before we decrement the count.
-			 */
-			if (is_swbp_at_addr(vma->vm_mm, vaddr) == 1)
-				atomic_dec(&vma->vm_mm->uprobes_state.count);
-		}
+		/*
+		 * An unregister could have removed the probe before
+		 * unmap. So check before we decrement the count.
+		 */
+		if (is_swbp_at_addr(vma->vm_mm, vaddr) == 1)
+			atomic_dec(&vma->vm_mm->uprobes_state.count);
 		put_uprobe(uprobe);
 	}
 	mutex_unlock(uprobes_mmap_hash(inode));
-- 
1.5.5.1


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/


[Other Archives]     [Linux Kernel Newbies]     [Linux Driver Development]     [Linux Kbuild]     [Fedora Kernel]     [Linux Kernel Testers]     [Linux SH]     [Linux Omap]     [Linux Tape]     [Linux Input]     [Linux Kernel Janitors]     [Linux Kernel Packagers]     [Linux Doc]     [Linux Man Pages]     [Linux API]     [Linux Memory Management]     [Linux Modules]     [Linux Standards]     [Kernel Announce]     [Netdev]     [Git]     [Linux PCI]     Linux CAN Development     [Linux I2C]     [Linux RDMA]     [Linux NUMA]     [Netfilter]     [Netfilter Devel]     [SELinux]     [Bugtraq]     [FIO]     [Linux Perf Users]     [Linux Serial]     [Linux PPP]     [Linux ISDN]     [Linux Next]     [Kernel Stable Commits]     [Linux Tip Commits]     [Kernel MM Commits]     [Linux Security Module]     [AutoFS]     [Filesystem Development]     [Ext3 Filesystem]     [Linux bcache]     [Ext4 Filesystem]     [Linux BTRFS]     [Linux CEPH Filesystem]     [Linux XFS]     [XFS]     [Linux NFS]     [Linux CIFS]     [Ecryptfs]     [Linux NILFS]     [Linux Cachefs]     [Reiser FS]     [Initramfs]     [Linux FB Devel]     [Linux OpenGL]     [DRI Devel]     [Fastboot]     [Linux RT Users]     [Linux RT Stable]     [eCos]     [Corosync]     [Linux Clusters]     [LVS Devel]     [Hot Plug]     [Linux Virtualization]     [KVM]     [KVM PPC]     [KVM ia64]     [Linux Containers]     [Linux Hexagon]     [Linux Cgroups]     [Util Linux]     [Wireless]     [Linux Bluetooth]     [Bluez Devel]     [Ethernet Bridging]     [Embedded Linux]     [Barebox]     [Linux MMC]     [Linux IIO]     [Sparse]     [Smatch]     [Linux Arch]     [x86 Platform Driver]     [Linux ACPI]     [Linux IBM ACPI]     [LM Sensors]     [CPU Freq]     [Linux Power Management]     [Linmodems]     [Linux DCCP]     [Linux SCTP]     [ALSA Devel]     [Linux USB]     [Linux PA RISC]     [Linux Samsung SOC]     [MIPS Linux]     [IBM S/390 Linux]     [ARM Linux]     [ARM Kernel]     [ARM MSM]     [Tegra Devel]     [Sparc Linux]     [Linux Security]     [Linux Sound]     [Linux Media]     [Video 4 Linux]     [Linux IRDA Users]     [Linux for the blind]     [Linux RAID]     [Linux ATA RAID]     [Device Mapper]     [Linux SCSI]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Linux IDE]     [Linux SMP]     [Linux AXP]     [Linux Alpha]     [Linux M68K]     [Linux ia64]     [Linux 8086]     [Linux x86_64]     [Linux Config]     [Linux Apps]     [Linux MSDOS]     [Linux X.25]     [Linux Crypto]     [DM Crypt]     [Linux Trace Users]     [Linux Btrace]     [Linux Watchdog]     [Utrace Devel]     [Linux C Programming]     [Linux Assembly]     [Dash]     [DWARVES]     [Hail Devel]     [Linux Kernel Debugger]     [Linux gcc]     [Gcc Help]     [X.Org]     [Wine]

Add to Google Powered by Linux

[Older Kernel Discussion]     [Yosemite National Park Forum]     [Large Format Photos]     [Gimp]     [Yosemite Photos]     [Stuff]