Re: Logitech HD Webcam C525 does not work when connected to USB 2 port, works on USB 3

[Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>]

On Sat, 30 Jun 2012, Frederik Himpe wrote:

> Hello,
> 
> I've got a Logitech HD Webcam C525 using the uvcvideo module and I use
> Linux 3.5 RC4. When this camera is connected to a USB2 port, it does not
> work most of the time. However it does work fine when connected to a USB
> 3 port. In Windows it works on both ports.

...

> Complete dmesg and lsusb -v output about a failed attempt (on USB 2
> port) and a succeeded attempt (on USB 3) can be found on
> http://artipc10.vub.ac.be/~frederik/webcam/

A usbmon trace would be more helpful.  Or perhaps a pair of traces, one 
for the USB-2 port and one for the USB-3 port.  See the instructions in 
Documentation/usb/usbmon.txt.

Those disconnections in your dmesg logs are not normal.  They could be 
caused by a hardware incompatibility or by a software problem -- 
although if it were software then I would expect the same thing to 
happen with the USB-3 port.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/