[PATCH 10/19] staging: comedi: adl_pci6208: add whitespace to the subdev init

[H Hartley Sweeten <hartleys@xxxxxxxxxxxxxxxxxxx>]

Add whitespace to the subdev initialization and remove the
unnecessary comments to improve readability.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/adl_pci6208.c | 34 ++++++++++++++--------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index e3f459b..b65fed7 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -251,26 +251,26 @@ static int pci6208_attach(struct comedi_device *dev,
 
 	s = dev->subdevices + 0;
 	/* analog output subdevice */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE;	/* anything else to add here?? */
-	s->n_chan = thisboard->ao_chans;
-	s->maxdata = 0xffff;	/* 16-bit DAC */
-	s->range_table = &range_bipolar10;	/* this needs to be checked. */
-	s->insn_write = pci6208_ao_winsn;
-	s->insn_read = pci6208_ao_rinsn;
+	s->type		= COMEDI_SUBD_AO;
+	s->subdev_flags	= SDF_WRITABLE;
+	s->n_chan	= thisboard->ao_chans;
+	s->maxdata	= 0xffff;
+	s->range_table	= &range_bipolar10;
+	s->insn_write	= pci6208_ao_winsn;
+	s->insn_read	= pci6208_ao_rinsn;
 
 	s = dev->subdevices + 1;
 	/* digital i/o subdevice */
-	s->type = COMEDI_SUBD_DIO;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-	s->n_chan = 8;
-	s->maxdata = 1;
-	s->range_table = &range_digital;
-	s->insn_bits = pci6208_dio_insn_bits;
-	s->insn_config = pci6208_dio_insn_config;
-
-	s->io_bits = 0x0f;
-	s->state = inw(dev->iobase + PCI6208_DIO);
+	s->type		= COMEDI_SUBD_DIO;
+	s->subdev_flags	= SDF_READABLE | SDF_WRITABLE;
+	s->n_chan	= 8;
+	s->maxdata	= 1;
+	s->range_table	= &range_digital;
+	s->insn_bits	= pci6208_dio_insn_bits;
+	s->insn_config	= pci6208_dio_insn_config;
+
+	s->io_bits	= 0x0f;
+	s->state	= inw(dev->iobase + PCI6208_DIO);
 
 	dev_info(dev->class_dev, "%s: %s, I/O base=0x%04lx\n",
 		dev->driver->driver_name, dev->board_name, dev->iobase);
-- 
1.7.11

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/