[PATCH 3/3] REGULATOR: fix regmap offsets for enable/disable

[Graeme Gregory <gg@xxxxxxxxxxxxxxx>]

I forgot to apply the offsets for the regmap helper functions for
enable/disable on SMPS10 and the LDO regulators. This means regulators
will not enable/disable correctly.

Signed-off-by: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
Tested-by: Sebastien Guiriec <s-guiriec@xxxxxx>
---
 drivers/regulator/palmas-regulator.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 6c48511..7540c95 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -667,7 +667,9 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 			pmic->desc[id].ops = &palmas_ops_smps10;
 			pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
 			pmic->desc[id].vsel_mask = SMPS10_VSEL;
-			pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS;
+			pmic->desc[id].enable_reg =
+					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+							PALMAS_SMPS10_STATUS);
 			pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
 			pmic->desc[id].min_uV = 3750000;
 			pmic->desc[id].uV_step = 1250000;
@@ -739,7 +741,8 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 
 		pmic->desc[id].type = REGULATOR_VOLTAGE;
 		pmic->desc[id].owner = THIS_MODULE;
-		pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr;
+		pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+						palmas_regs_info[id].ctrl_addr);
 		pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
 
 		if (pdata && pdata->reg_data)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/