3.3-stable review patch. If anyone has any objections, please let me know. ------------------ From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx> commit 28c56ea1431421dec51b7b229369e991481453df upstream. If USB UTMI PHY is not enable, writing to portsc register will lead to kernel hang during boot up. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx> Reported-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/host/ehci-fsl.c | 4 ++++ drivers/usb/host/ehci-fsl.h | 1 + 2 files changed, 5 insertions(+) --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -216,6 +216,8 @@ static void ehci_fsl_setup_phy(struct eh unsigned int port_offset) { u32 portsc; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + void __iomem *non_ehci = hcd->regs; portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); @@ -231,6 +233,8 @@ static void ehci_fsl_setup_phy(struct eh portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: + /* enable UTMI PHY */ + setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN); portsc |= PORT_PTS_UTMI; break; case FSL_USB2_PHY_NONE: --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -45,5 +45,6 @@ #define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ +#define CTRL_UTMI_PHY_EN (1<<9) #define SNOOP_SIZE_2GB 0x1e #endif /* _EHCI_FSL_H */ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/