[PATCH 04/37] Separate the gdbstub from the debug core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Split the former kernel/kgdb.c into debug_core.c which contains the
kernel debugger exception logic and to the gdbstub.c which contains
the logic for allowing gdb to talk to the debug core.

This also created a private include file called debug_core.h which
contains all the definitions to glue the debug_core to any other
debugger connections.

CC: Ingo Molnar <mingo at elte.hu>
Signed-off-by: Jason Wessel <jason.wessel at windriver.com>
---
 kernel/debug/Makefile     |    2 +-
 kernel/debug/debug_core.c |  990 ++-------------------------------------------
 kernel/debug/debug_core.h |   49 +++
 kernel/debug/gdbstub.c    |  939 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 1027 insertions(+), 953 deletions(-)
 create mode 100644 kernel/debug/debug_core.h
 create mode 100644 kernel/debug/gdbstub.c

diff --git a/kernel/debug/Makefile b/kernel/debug/Makefile
index 5287fc8..3657c64 100644
--- a/kernel/debug/Makefile
+++ b/kernel/debug/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the linux kernel debugger
 #
 
-obj-$(CONFIG_KGDB) += debug_core.o
\ No newline at end of file
+obj-$(CONFIG_KGDB) += debug_core.o gdbstub.o
\ No newline at end of file
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 761fdd2..bc11df8 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -1,5 +1,5 @@
 /*
- * KGDB stub.
+ * Kernel Debug Core
  *
  * Maintainer: Jason Wessel <jason.wessel at windriver.com>
  *
@@ -9,7 +9,7 @@
  * Copyright (C) 2004 Pavel Machek <pavel at suse.cz>
  * Copyright (C) 2004-2006 Tom Rini <trini at kernel.crashing.org>
  * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
- * Copyright (C) 2005-2008 Wind River Systems, Inc.
+ * Copyright (C) 2005-2009 Wind River Systems, Inc.
  * Copyright (C) 2007 MontaVista Software, Inc.
  * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo at redhat.com>
  *
@@ -37,7 +37,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/ptrace.h>
-#include <linux/reboot.h>
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
@@ -52,27 +51,12 @@
 #include <asm/byteorder.h>
 #include <asm/atomic.h>
 #include <asm/system.h>
-#include <asm/unaligned.h>
 
-static int kgdb_break_asap;
+#include "debug_core.h"
 
-#define KGDB_MAX_THREAD_QUERY 17
-struct kgdb_state {
-	int			ex_vector;
-	int			signo;
-	int			err_code;
-	int			cpu;
-	int			pass_exception;
-	unsigned long		thr_query;
-	unsigned long		threadid;
-	long			kgdb_usethreadid;
-	struct pt_regs		*linux_regs;
-};
+static int kgdb_break_asap;
 
-static struct debuggerinfo_struct {
-	void			*debuggerinfo;
-	struct task_struct	*task;
-} kgdb_info[NR_CPUS];
+struct debuggerinfo_struct kgdb_info[NR_CPUS];
 
 /**
  * kgdb_connected - Is a host GDB connected to us?
@@ -86,7 +70,7 @@ static int			kgdb_io_module_registered;
 /* Guard for recursive entry */
 static int			exception_level;
 
-static struct kgdb_io		*kgdb_io_ops;
+struct kgdb_io		*dbg_io_ops;
 static DEFINE_SPINLOCK(kgdb_registration_lock);
 
 /* kgdb console driver is loaded */
@@ -131,15 +115,6 @@ struct task_struct		*kgdb_contthread;
 int				kgdb_single_step;
 pid_t				kgdb_sstep_pid;
 
-/* Our I/O buffers. */
-static char			remcom_in_buffer[BUFMAX];
-static char			remcom_out_buffer[BUFMAX];
-
-/* Storage for the registers, in GDB format. */
-static unsigned long		gdb_regs[(NUMREGBYTES +
-					sizeof(unsigned long) - 1) /
-					sizeof(unsigned long)];
-
 /* to keep track of the CPU which is doing the single stepping*/
 atomic_t			kgdb_cpu_doing_single_step = ATOMIC_INIT(-1);
 
@@ -240,329 +215,6 @@ void __weak kgdb_disable_hw_debug(struct pt_regs *regs)
 }
 
 /*
- * GDB remote protocol parser:
- */
-
-static int hex(char ch)
-{
-	if ((ch >= 'a') && (ch <= 'f'))
-		return ch - 'a' + 10;
-	if ((ch >= '0') && (ch <= '9'))
-		return ch - '0';
-	if ((ch >= 'A') && (ch <= 'F'))
-		return ch - 'A' + 10;
-	return -1;
-}
-
-/* scan for the sequence $<data>#<checksum> */
-static void get_packet(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int count;
-	char ch;
-
-	do {
-		/*
-		 * Spin and wait around for the start character, ignore all
-		 * other characters:
-		 */
-		while ((ch = (kgdb_io_ops->read_char())) != '$')
-			/* nothing */;
-
-		kgdb_connected = 1;
-		checksum = 0;
-		xmitcsum = -1;
-
-		count = 0;
-
-		/*
-		 * now, read until a # or end of buffer is found:
-		 */
-		while (count < (BUFMAX - 1)) {
-			ch = kgdb_io_ops->read_char();
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(kgdb_io_ops->read_char()) << 4;
-			xmitcsum += hex(kgdb_io_ops->read_char());
-
-			if (checksum != xmitcsum)
-				/* failed checksum */
-				kgdb_io_ops->write_char('-');
-			else
-				/* successful transfer */
-				kgdb_io_ops->write_char('+');
-			if (kgdb_io_ops->flush)
-				kgdb_io_ops->flush();
-		}
-	} while (checksum != xmitcsum);
-}
-
-/*
- * Send the packet in buffer.
- * Check for gdb connection if asked for.
- */
-static void put_packet(char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	char ch;
-
-	/*
-	 * $<packet info>#<checksum>.
-	 */
-	while (1) {
-		kgdb_io_ops->write_char('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count])) {
-			kgdb_io_ops->write_char(ch);
-			checksum += ch;
-			count++;
-		}
-
-		kgdb_io_ops->write_char('#');
-		kgdb_io_ops->write_char(hex_asc_hi(checksum));
-		kgdb_io_ops->write_char(hex_asc_lo(checksum));
-		if (kgdb_io_ops->flush)
-			kgdb_io_ops->flush();
-
-		/* Now see what we get in reply. */
-		ch = kgdb_io_ops->read_char();
-
-		if (ch == 3)
-			ch = kgdb_io_ops->read_char();
-
-		/* If we get an ACK, we are done. */
-		if (ch == '+')
-			return;
-
-		/*
-		 * If we get the start of another packet, this means
-		 * that GDB is attempting to reconnect.  We will NAK
-		 * the packet being sent, and stop trying to send this
-		 * packet.
-		 */
-		if (ch == '$') {
-			kgdb_io_ops->write_char('-');
-			if (kgdb_io_ops->flush)
-				kgdb_io_ops->flush();
-			return;
-		}
-	}
-}
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null). May return an error.
- */
-int kgdb_mem2hex(char *mem, char *buf, int count)
-{
-	char *tmp;
-	int err;
-
-	/*
-	 * We use the upper half of buf as an intermediate buffer for the
-	 * raw memory copy.  Hex conversion will work against this one.
-	 */
-	tmp = buf + count;
-
-	err = probe_kernel_read(tmp, mem, count);
-	if (!err) {
-		while (count > 0) {
-			buf = pack_hex_byte(buf, *tmp);
-			tmp++;
-			count--;
-		}
-
-		*buf = 0;
-	}
-
-	return err;
-}
-
-/*
- * Copy the binary array pointed to by buf into mem.  Fix $, #, and
- * 0x7d escaped with 0x7d.  Return a pointer to the character after
- * the last byte written.
- */
-static int kgdb_ebin2mem(char *buf, char *mem, int count)
-{
-	int err = 0;
-	char c;
-
-	while (count-- > 0) {
-		c = *buf++;
-		if (c == 0x7d)
-			c = *buf++ ^ 0x20;
-
-		err = probe_kernel_write(mem, &c, 1);
-		if (err)
-			break;
-
-		mem++;
-	}
-
-	return err;
-}
-
-/*
- * Convert the hex array pointed to by buf into binary to be placed in mem.
- * Return a pointer to the character AFTER the last byte written.
- * May return an error.
- */
-int kgdb_hex2mem(char *buf, char *mem, int count)
-{
-	char *tmp_raw;
-	char *tmp_hex;
-
-	/*
-	 * We use the upper half of buf as an intermediate buffer for the
-	 * raw memory that is converted from hex.
-	 */
-	tmp_raw = buf + count * 2;
-
-	tmp_hex = tmp_raw - 1;
-	while (tmp_hex >= buf) {
-		tmp_raw--;
-		*tmp_raw = hex(*tmp_hex--);
-		*tmp_raw |= hex(*tmp_hex--) << 4;
-	}
-
-	return probe_kernel_write(mem, tmp_raw, count);
-}
-
-/*
- * While we find nice hex chars, build a long_val.
- * Return number of chars processed.
- */
-int kgdb_hex2long(char **ptr, unsigned long *long_val)
-{
-	int hex_val;
-	int num = 0;
-	int negate = 0;
-
-	*long_val = 0;
-
-	if (**ptr == '-') {
-		negate = 1;
-		(*ptr)++;
-	}
-	while (**ptr) {
-		hex_val = hex(**ptr);
-		if (hex_val < 0)
-			break;
-
-		*long_val = (*long_val << 4) | hex_val;
-		num++;
-		(*ptr)++;
-	}
-
-	if (negate)
-		*long_val = -*long_val;
-
-	return num;
-}
-
-/* Write memory due to an 'M' or 'X' packet. */
-static int write_mem_msg(int binary)
-{
-	char *ptr = &remcom_in_buffer[1];
-	unsigned long addr;
-	unsigned long length;
-	int err;
-
-	if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
-	    kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
-		if (binary)
-			err = kgdb_ebin2mem(ptr, (char *)addr, length);
-		else
-			err = kgdb_hex2mem(ptr, (char *)addr, length);
-		if (err)
-			return err;
-		if (CACHE_FLUSH_IS_SAFE)
-			flush_icache_range(addr, addr + length);
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static void error_packet(char *pkt, int error)
-{
-	error = -error;
-	pkt[0] = 'E';
-	pkt[1] = hex_asc[(error / 10)];
-	pkt[2] = hex_asc[(error % 10)];
-	pkt[3] = '\0';
-}
-
-/*
- * Thread ID accessors. We represent a flat TID space to GDB, where
- * the per CPU idle threads (which under Linux all have PID 0) are
- * remapped to negative TIDs.
- */
-
-#define BUF_THREAD_ID_SIZE	16
-
-static char *pack_threadid(char *pkt, unsigned char *id)
-{
-	char *limit;
-
-	limit = pkt + BUF_THREAD_ID_SIZE;
-	while (pkt < limit)
-		pkt = pack_hex_byte(pkt, *id++);
-
-	return pkt;
-}
-
-static void int_to_threadref(unsigned char *id, int value)
-{
-	unsigned char *scan;
-	int i = 4;
-
-	scan = (unsigned char *)id;
-	while (i--)
-		*scan++ = 0;
-	put_unaligned_be32(value, scan);
-}
-
-static struct task_struct *getthread(struct pt_regs *regs, int tid)
-{
-	/*
-	 * Non-positive TIDs are remapped to the cpu shadow information
-	 */
-	if (tid == 0 || tid == -1)
-		tid = -atomic_read(&kgdb_active) - 2;
-	if (tid < -1 && tid > -NR_CPUS - 2) {
-		if (kgdb_info[-tid - 2].task)
-			return kgdb_info[-tid - 2].task;
-		else
-			return idle_task(-tid - 2);
-	}
-	if (tid <= 0) {
-		printk(KERN_ERR "KGDB: Internal thread select error\n");
-		dump_stack();
-		return NULL;
-	}
-
-	/*
-	 * find_task_by_pid_ns() does not take the tasklist lock anymore
-	 * but is nicely RCU locked - hence is a pretty resilient
-	 * thing to use:
-	 */
-	return find_task_by_pid_ns(tid, &init_pid_ns);
-}
-
-/*
  * CPU debug state control:
  */
 
@@ -625,7 +277,7 @@ static void kgdb_flush_swbreak_addr(unsigned long addr)
 /*
  * SW breakpoint management:
  */
-static int kgdb_activate_sw_breakpoints(void)
+int dbg_activate_sw_breakpoints(void)
 {
 	unsigned long addr;
 	int error;
@@ -651,7 +303,7 @@ static int kgdb_activate_sw_breakpoints(void)
 	return ret;
 }
 
-static int kgdb_set_sw_break(unsigned long addr)
+int dbg_set_sw_break(unsigned long addr)
 {
 	int err = kgdb_validate_break_address(addr);
 	int breakno = -1;
@@ -716,7 +368,7 @@ static int kgdb_deactivate_sw_breakpoints(void)
 	return ret;
 }
 
-static int kgdb_remove_sw_break(unsigned long addr)
+int dbg_remove_sw_break(unsigned long addr)
 {
 	int i;
 
@@ -742,7 +394,7 @@ int kgdb_isremovedbreak(unsigned long addr)
 	return 0;
 }
 
-static int remove_all_break(void)
+int dbg_remove_all_break(void)
 {
 	unsigned long addr;
 	int error;
@@ -770,53 +422,6 @@ setundefined:
 }
 
 /*
- * Remap normal tasks to their real PID,
- * CPU shadow threads are mapped to -CPU - 2
- */
-static inline int shadow_pid(int realpid)
-{
-	if (realpid)
-		return realpid;
-
-	return -raw_smp_processor_id() - 2;
-}
-
-static char gdbmsgbuf[BUFMAX + 1];
-
-static void kgdb_msg_write(const char *s, int len)
-{
-	char *bufptr;
-	int wcount;
-	int i;
-
-	/* 'O'utput */
-	gdbmsgbuf[0] = 'O';
-
-	/* Fill and send buffers... */
-	while (len > 0) {
-		bufptr = gdbmsgbuf + 1;
-
-		/* Calculate how many this time */
-		if ((len << 1) > (BUFMAX - 2))
-			wcount = (BUFMAX - 2) >> 1;
-		else
-			wcount = len;
-
-		/* Pack in hex chars */
-		for (i = 0; i < wcount; i++)
-			bufptr = pack_hex_byte(bufptr, s[i]);
-		*bufptr = '\0';
-
-		/* Move up */
-		s += wcount;
-		len -= wcount;
-
-		/* Write packet */
-		put_packet(gdbmsgbuf);
-	}
-}
-
-/*
  * Return true if there is a valid kgdb I/O module.  Also if no
  * debugger is attached a message can be printed to the console about
  * waiting for the debugger to attach.
@@ -827,7 +432,7 @@ static void kgdb_msg_write(const char *s, int len)
  */
 static int kgdb_io_ready(int print_wait)
 {
-	if (!kgdb_io_ops)
+	if (!dbg_io_ops)
 		return 0;
 	if (kgdb_connected)
 		return 1;
@@ -838,525 +443,6 @@ static int kgdb_io_ready(int print_wait)
 	return 1;
 }
 
-/*
- * All the functions that start with gdb_cmd are the various
- * operations to implement the handlers for the gdbserial protocol
- * where KGDB is communicating with an external debugger
- */
-
-/* Handle the '?' status packets */
-static void gdb_cmd_status(struct kgdb_state *ks)
-{
-	/*
-	 * We know that this packet is only sent
-	 * during initial connect.  So to be safe,
-	 * we clear out our breakpoints now in case
-	 * GDB is reconnecting.
-	 */
-	remove_all_break();
-
-	remcom_out_buffer[0] = 'S';
-	pack_hex_byte(&remcom_out_buffer[1], ks->signo);
-}
-
-/* Handle the 'g' get registers request */
-static void gdb_cmd_getregs(struct kgdb_state *ks)
-{
-	struct task_struct *thread;
-	void *local_debuggerinfo;
-	int i;
-
-	thread = kgdb_usethread;
-	if (!thread) {
-		thread = kgdb_info[ks->cpu].task;
-		local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
-	} else {
-		local_debuggerinfo = NULL;
-		for_each_online_cpu(i) {
-			/*
-			 * Try to find the task on some other
-			 * or possibly this node if we do not
-			 * find the matching task then we try
-			 * to approximate the results.
-			 */
-			if (thread == kgdb_info[i].task)
-				local_debuggerinfo = kgdb_info[i].debuggerinfo;
-		}
-	}
-
-	/*
-	 * All threads that don't have debuggerinfo should be
-	 * in schedule() sleeping, since all other CPUs
-	 * are in kgdb_wait, and thus have debuggerinfo.
-	 */
-	if (local_debuggerinfo) {
-		pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
-	} else {
-		/*
-		 * Pull stuff saved during switch_to; nothing
-		 * else is accessible (or even particularly
-		 * relevant).
-		 *
-		 * This should be enough for a stack trace.
-		 */
-		sleeping_thread_to_gdb_regs(gdb_regs, thread);
-	}
-	kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
-}
-
-/* Handle the 'G' set registers request */
-static void gdb_cmd_setregs(struct kgdb_state *ks)
-{
-	kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
-
-	if (kgdb_usethread && kgdb_usethread != current) {
-		error_packet(remcom_out_buffer, -EINVAL);
-	} else {
-		gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
-		strcpy(remcom_out_buffer, "OK");
-	}
-}
-
-/* Handle the 'm' memory read bytes */
-static void gdb_cmd_memread(struct kgdb_state *ks)
-{
-	char *ptr = &remcom_in_buffer[1];
-	unsigned long length;
-	unsigned long addr;
-	int err;
-
-	if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
-					kgdb_hex2long(&ptr, &length) > 0) {
-		err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
-		if (err)
-			error_packet(remcom_out_buffer, err);
-	} else {
-		error_packet(remcom_out_buffer, -EINVAL);
-	}
-}
-
-/* Handle the 'M' memory write bytes */
-static void gdb_cmd_memwrite(struct kgdb_state *ks)
-{
-	int err = write_mem_msg(0);
-
-	if (err)
-		error_packet(remcom_out_buffer, err);
-	else
-		strcpy(remcom_out_buffer, "OK");
-}
-
-/* Handle the 'X' memory binary write bytes */
-static void gdb_cmd_binwrite(struct kgdb_state *ks)
-{
-	int err = write_mem_msg(1);
-
-	if (err)
-		error_packet(remcom_out_buffer, err);
-	else
-		strcpy(remcom_out_buffer, "OK");
-}
-
-/* Handle the 'D' or 'k', detach or kill packets */
-static void gdb_cmd_detachkill(struct kgdb_state *ks)
-{
-	int error;
-
-	/* The detach case */
-	if (remcom_in_buffer[0] == 'D') {
-		error = remove_all_break();
-		if (error < 0) {
-			error_packet(remcom_out_buffer, error);
-		} else {
-			strcpy(remcom_out_buffer, "OK");
-			kgdb_connected = 0;
-		}
-		put_packet(remcom_out_buffer);
-	} else {
-		/*
-		 * Assume the kill case, with no exit code checking,
-		 * trying to force detach the debugger:
-		 */
-		remove_all_break();
-		kgdb_connected = 0;
-	}
-}
-
-/* Handle the 'R' reboot packets */
-static int gdb_cmd_reboot(struct kgdb_state *ks)
-{
-	/* For now, only honor R0 */
-	if (strcmp(remcom_in_buffer, "R0") == 0) {
-		printk(KERN_CRIT "Executing emergency reboot\n");
-		strcpy(remcom_out_buffer, "OK");
-		put_packet(remcom_out_buffer);
-
-		/*
-		 * Execution should not return from
-		 * machine_emergency_restart()
-		 */
-		machine_emergency_restart();
-		kgdb_connected = 0;
-
-		return 1;
-	}
-	return 0;
-}
-
-/* Handle the 'q' query packets */
-static void gdb_cmd_query(struct kgdb_state *ks)
-{
-	struct task_struct *g;
-	struct task_struct *p;
-	unsigned char thref[8];
-	char *ptr;
-	int i;
-	int cpu;
-	int finished = 0;
-
-	switch (remcom_in_buffer[1]) {
-	case 's':
-	case 'f':
-		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
-			error_packet(remcom_out_buffer, -EINVAL);
-			break;
-		}
-
-		i = 0;
-		remcom_out_buffer[0] = 'm';
-		ptr = remcom_out_buffer + 1;
-		if (remcom_in_buffer[1] == 'f') {
-			/* Each cpu is a shadow thread */
-			for_each_online_cpu(cpu) {
-				ks->thr_query = 0;
-				int_to_threadref(thref, -cpu - 2);
-				pack_threadid(ptr, thref);
-				ptr += BUF_THREAD_ID_SIZE;
-				*(ptr++) = ',';
-				i++;
-			}
-		}
-
-		do_each_thread(g, p) {
-			if (i >= ks->thr_query && !finished) {
-				int_to_threadref(thref, p->pid);
-				pack_threadid(ptr, thref);
-				ptr += BUF_THREAD_ID_SIZE;
-				*(ptr++) = ',';
-				ks->thr_query++;
-				if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
-					finished = 1;
-			}
-			i++;
-		} while_each_thread(g, p);
-
-		*(--ptr) = '\0';
-		break;
-
-	case 'C':
-		/* Current thread id */
-		strcpy(remcom_out_buffer, "QC");
-		ks->threadid = shadow_pid(current->pid);
-		int_to_threadref(thref, ks->threadid);
-		pack_threadid(remcom_out_buffer + 2, thref);
-		break;
-	case 'T':
-		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
-			error_packet(remcom_out_buffer, -EINVAL);
-			break;
-		}
-		ks->threadid = 0;
-		ptr = remcom_in_buffer + 17;
-		kgdb_hex2long(&ptr, &ks->threadid);
-		if (!getthread(ks->linux_regs, ks->threadid)) {
-			error_packet(remcom_out_buffer, -EINVAL);
-			break;
-		}
-		if ((int)ks->threadid > 0) {
-			kgdb_mem2hex(getthread(ks->linux_regs,
-					ks->threadid)->comm,
-					remcom_out_buffer, 16);
-		} else {
-			static char tmpstr[23 + BUF_THREAD_ID_SIZE];
-
-			sprintf(tmpstr, "shadowCPU%d",
-					(int)(-ks->threadid - 2));
-			kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
-		}
-		break;
-	}
-}
-
-/* Handle the 'H' task query packets */
-static void gdb_cmd_task(struct kgdb_state *ks)
-{
-	struct task_struct *thread;
-	char *ptr;
-
-	switch (remcom_in_buffer[1]) {
-	case 'g':
-		ptr = &remcom_in_buffer[2];
-		kgdb_hex2long(&ptr, &ks->threadid);
-		thread = getthread(ks->linux_regs, ks->threadid);
-		if (!thread && ks->threadid > 0) {
-			error_packet(remcom_out_buffer, -EINVAL);
-			break;
-		}
-		kgdb_usethread = thread;
-		ks->kgdb_usethreadid = ks->threadid;
-		strcpy(remcom_out_buffer, "OK");
-		break;
-	case 'c':
-		ptr = &remcom_in_buffer[2];
-		kgdb_hex2long(&ptr, &ks->threadid);
-		if (!ks->threadid) {
-			kgdb_contthread = NULL;
-		} else {
-			thread = getthread(ks->linux_regs, ks->threadid);
-			if (!thread && ks->threadid > 0) {
-				error_packet(remcom_out_buffer, -EINVAL);
-				break;
-			}
-			kgdb_contthread = thread;
-		}
-		strcpy(remcom_out_buffer, "OK");
-		break;
-	}
-}
-
-/* Handle the 'T' thread query packets */
-static void gdb_cmd_thread(struct kgdb_state *ks)
-{
-	char *ptr = &remcom_in_buffer[1];
-	struct task_struct *thread;
-
-	kgdb_hex2long(&ptr, &ks->threadid);
-	thread = getthread(ks->linux_regs, ks->threadid);
-	if (thread)
-		strcpy(remcom_out_buffer, "OK");
-	else
-		error_packet(remcom_out_buffer, -EINVAL);
-}
-
-/* Handle the 'z' or 'Z' breakpoint remove or set packets */
-static void gdb_cmd_break(struct kgdb_state *ks)
-{
-	/*
-	 * Since GDB-5.3, it's been drafted that '0' is a software
-	 * breakpoint, '1' is a hardware breakpoint, so let's do that.
-	 */
-	char *bpt_type = &remcom_in_buffer[1];
-	char *ptr = &remcom_in_buffer[2];
-	unsigned long addr;
-	unsigned long length;
-	int error = 0;
-
-	if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
-		/* Unsupported */
-		if (*bpt_type > '4')
-			return;
-	} else {
-		if (*bpt_type != '0' && *bpt_type != '1')
-			/* Unsupported. */
-			return;
-	}
-
-	/*
-	 * Test if this is a hardware breakpoint, and
-	 * if we support it:
-	 */
-	if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
-		/* Unsupported. */
-		return;
-
-	if (*(ptr++) != ',') {
-		error_packet(remcom_out_buffer, -EINVAL);
-		return;
-	}
-	if (!kgdb_hex2long(&ptr, &addr)) {
-		error_packet(remcom_out_buffer, -EINVAL);
-		return;
-	}
-	if (*(ptr++) != ',' ||
-		!kgdb_hex2long(&ptr, &length)) {
-		error_packet(remcom_out_buffer, -EINVAL);
-		return;
-	}
-
-	if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
-		error = kgdb_set_sw_break(addr);
-	else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
-		error = kgdb_remove_sw_break(addr);
-	else if (remcom_in_buffer[0] == 'Z')
-		error = arch_kgdb_ops.set_hw_breakpoint(addr,
-			(int)length, *bpt_type - '0');
-	else if (remcom_in_buffer[0] == 'z')
-		error = arch_kgdb_ops.remove_hw_breakpoint(addr,
-			(int) length, *bpt_type - '0');
-
-	if (error == 0)
-		strcpy(remcom_out_buffer, "OK");
-	else
-		error_packet(remcom_out_buffer, error);
-}
-
-/* Handle the 'C' signal / exception passing packets */
-static int gdb_cmd_exception_pass(struct kgdb_state *ks)
-{
-	/* C09 == pass exception
-	 * C15 == detach kgdb, pass exception
-	 */
-	if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
-
-		ks->pass_exception = 1;
-		remcom_in_buffer[0] = 'c';
-
-	} else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
-
-		ks->pass_exception = 1;
-		remcom_in_buffer[0] = 'D';
-		remove_all_break();
-		kgdb_connected = 0;
-		return 1;
-
-	} else {
-		kgdb_msg_write("KGDB only knows signal 9 (pass)"
-			" and 15 (pass and disconnect)\n"
-			"Executing a continue without signal passing\n", 0);
-		remcom_in_buffer[0] = 'c';
-	}
-
-	/* Indicate fall through */
-	return -1;
-}
-
-/*
- * This function performs all gdbserial command procesing
- */
-static int gdb_serial_stub(struct kgdb_state *ks)
-{
-	int error = 0;
-	int tmp;
-
-	/* Clear the out buffer. */
-	memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
-
-	if (kgdb_connected) {
-		unsigned char thref[8];
-		char *ptr;
-
-		/* Reply to host that an exception has occurred */
-		ptr = remcom_out_buffer;
-		*ptr++ = 'T';
-		ptr = pack_hex_byte(ptr, ks->signo);
-		ptr += strlen(strcpy(ptr, "thread:"));
-		int_to_threadref(thref, shadow_pid(current->pid));
-		ptr = pack_threadid(ptr, thref);
-		*ptr++ = ';';
-		put_packet(remcom_out_buffer);
-	}
-
-	kgdb_usethread = kgdb_info[ks->cpu].task;
-	ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
-	ks->pass_exception = 0;
-
-	while (1) {
-		error = 0;
-
-		/* Clear the out buffer. */
-		memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
-
-		get_packet(remcom_in_buffer);
-
-		switch (remcom_in_buffer[0]) {
-		case '?': /* gdbserial status */
-			gdb_cmd_status(ks);
-			break;
-		case 'g': /* return the value of the CPU registers */
-			gdb_cmd_getregs(ks);
-			break;
-		case 'G': /* set the value of the CPU registers - return OK */
-			gdb_cmd_setregs(ks);
-			break;
-		case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
-			gdb_cmd_memread(ks);
-			break;
-		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
-			gdb_cmd_memwrite(ks);
-			break;
-		case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
-			gdb_cmd_binwrite(ks);
-			break;
-			/* kill or detach. KGDB should treat this like a
-			 * continue.
-			 */
-		case 'D': /* Debugger detach */
-		case 'k': /* Debugger detach via kill */
-			gdb_cmd_detachkill(ks);
-			goto default_handle;
-		case 'R': /* Reboot */
-			if (gdb_cmd_reboot(ks))
-				goto default_handle;
-			break;
-		case 'q': /* query command */
-			gdb_cmd_query(ks);
-			break;
-		case 'H': /* task related */
-			gdb_cmd_task(ks);
-			break;
-		case 'T': /* Query thread status */
-			gdb_cmd_thread(ks);
-			break;
-		case 'z': /* Break point remove */
-		case 'Z': /* Break point set */
-			gdb_cmd_break(ks);
-			break;
-		case 'C': /* Exception passing */
-			tmp = gdb_cmd_exception_pass(ks);
-			if (tmp > 0)
-				goto default_handle;
-			if (tmp == 0)
-				break;
-			/* Fall through on tmp < 0 */
-		case 'c': /* Continue packet */
-		case 's': /* Single step packet */
-			if (kgdb_contthread && kgdb_contthread != current) {
-				/* Can't switch threads in kgdb */
-				error_packet(remcom_out_buffer, -EINVAL);
-				break;
-			}
-			kgdb_activate_sw_breakpoints();
-			/* Fall through to default processing */
-		default:
-default_handle:
-			error = kgdb_arch_handle_exception(ks->ex_vector,
-						ks->signo,
-						ks->err_code,
-						remcom_in_buffer,
-						remcom_out_buffer,
-						ks->linux_regs);
-			/*
-			 * Leave cmd processing on error, detach,
-			 * kill, continue, or single step.
-			 */
-			if (error >= 0 || remcom_in_buffer[0] == 'D' ||
-			    remcom_in_buffer[0] == 'k') {
-				error = 0;
-				goto kgdb_exit;
-			}
-
-		}
-
-		/* reply to the request */
-		put_packet(remcom_out_buffer);
-	}
-
-kgdb_exit:
-	if (ks->pass_exception)
-		error = 1;
-	return error;
-}
-
 static int kgdb_reenter_check(struct kgdb_state *ks)
 {
 	unsigned long addr;
@@ -1375,17 +461,17 @@ static int kgdb_reenter_check(struct kgdb_state *ks)
 	 * user because the user planted a breakpoint in a place that
 	 * KGDB needs in order to function.
 	 */
-	if (kgdb_remove_sw_break(addr) == 0) {
+	if (dbg_remove_sw_break(addr) == 0) {
 		exception_level = 0;
 		kgdb_skipexception(ks->ex_vector, ks->linux_regs);
-		kgdb_activate_sw_breakpoints();
+		dbg_activate_sw_breakpoints();
 		printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n",
 			addr);
 		WARN_ON_ONCE(1);
 
 		return 1;
 	}
-	remove_all_break();
+	dbg_remove_all_break();
 	kgdb_skipexception(ks->ex_vector, ks->linux_regs);
 
 	if (exception_level > 1) {
@@ -1462,7 +548,7 @@ acquirelock:
 
 	if (!kgdb_io_ready(1)) {
 		error = 1;
-		goto kgdb_restore; /* No I/O connection, so resume the system */
+		goto kgdb_restore; /* No I/O connection, resume the system */
 	}
 
 	/*
@@ -1472,8 +558,8 @@ acquirelock:
 		goto kgdb_restore;
 
 	/* Call the I/O driver's pre_exception routine */
-	if (kgdb_io_ops->pre_exception)
-		kgdb_io_ops->pre_exception();
+	if (dbg_io_ops->pre_exception)
+		dbg_io_ops->pre_exception();
 
 	kgdb_info[ks->cpu].debuggerinfo = ks->linux_regs;
 	kgdb_info[ks->cpu].task = current;
@@ -1523,8 +609,8 @@ acquirelock:
 	error = gdb_serial_stub(ks);
 
 	/* Call the I/O driver's post_exception routine */
-	if (kgdb_io_ops->post_exception)
-		kgdb_io_ops->post_exception();
+	if (dbg_io_ops->post_exception)
+		dbg_io_ops->post_exception();
 
 	kgdb_info[ks->cpu].debuggerinfo = NULL;
 	kgdb_info[ks->cpu].task = NULL;
@@ -1584,7 +670,7 @@ static void kgdb_console_write(struct console *co, const char *s,
 		return;
 
 	local_irq_save(flags);
-	kgdb_msg_write(s, count);
+	gdbstub_msg_write(s, count);
 	local_irq_restore(flags);
 }
 
@@ -1596,9 +682,9 @@ static struct console kgdbcons = {
 };
 
 #ifdef CONFIG_MAGIC_SYSRQ
-static void sysrq_handle_gdb(int key, struct tty_struct *tty)
+static void sysrq_handle_dbg(int key, struct tty_struct *tty)
 {
-	if (!kgdb_io_ops) {
+	if (!dbg_io_ops) {
 		printk(KERN_CRIT "ERROR: No KGDB I/O module available\n");
 		return;
 	}
@@ -1608,8 +694,8 @@ static void sysrq_handle_gdb(int key, struct tty_struct *tty)
 	kgdb_breakpoint();
 }
 
-static struct sysrq_key_op sysrq_gdb_op = {
-	.handler	= sysrq_handle_gdb,
+static struct sysrq_key_op sysrq_dbg_op = {
+	.handler	= sysrq_handle_dbg,
 	.help_msg	= "debug(G)",
 	.action_msg	= "DEBUG",
 };
@@ -1621,7 +707,7 @@ static void kgdb_register_callbacks(void)
 		kgdb_io_module_registered = 1;
 		kgdb_arch_init();
 #ifdef CONFIG_MAGIC_SYSRQ
-		register_sysrq_key('g', &sysrq_gdb_op);
+		register_sysrq_key('g', &sysrq_dbg_op);
 #endif
 		if (kgdb_use_con && !kgdb_con_registered) {
 			register_console(&kgdbcons);
@@ -1641,7 +727,7 @@ static void kgdb_unregister_callbacks(void)
 		kgdb_io_module_registered = 0;
 		kgdb_arch_exit();
 #ifdef CONFIG_MAGIC_SYSRQ
-		unregister_sysrq_key('g', &sysrq_gdb_op);
+		unregister_sysrq_key('g', &sysrq_dbg_op);
 #endif
 		if (kgdb_con_registered) {
 			unregister_console(&kgdbcons);
@@ -1660,17 +746,17 @@ static void kgdb_initial_breakpoint(void)
 
 /**
  *	kgdb_register_io_module - register KGDB IO module
- *	@new_kgdb_io_ops: the io ops vector
+ *	@new_dbg_io_ops: the io ops vector
  *
  *	Register it with the KGDB core.
  */
-int kgdb_register_io_module(struct kgdb_io *new_kgdb_io_ops)
+int kgdb_register_io_module(struct kgdb_io *new_dbg_io_ops)
 {
 	int err;
 
 	spin_lock(&kgdb_registration_lock);
 
-	if (kgdb_io_ops) {
+	if (dbg_io_ops) {
 		spin_unlock(&kgdb_registration_lock);
 
 		printk(KERN_ERR "kgdb: Another I/O driver is already "
@@ -1678,20 +764,20 @@ int kgdb_register_io_module(struct kgdb_io *new_kgdb_io_ops)
 		return -EBUSY;
 	}
 
-	if (new_kgdb_io_ops->init) {
-		err = new_kgdb_io_ops->init();
+	if (new_dbg_io_ops->init) {
+		err = new_dbg_io_ops->init();
 		if (err) {
 			spin_unlock(&kgdb_registration_lock);
 			return err;
 		}
 	}
 
-	kgdb_io_ops = new_kgdb_io_ops;
+	dbg_io_ops = new_dbg_io_ops;
 
 	spin_unlock(&kgdb_registration_lock);
 
 	printk(KERN_INFO "kgdb: Registered I/O driver %s.\n",
-	       new_kgdb_io_ops->name);
+	       new_dbg_io_ops->name);
 
 	/* Arm KGDB now. */
 	kgdb_register_callbacks();
@@ -1705,11 +791,11 @@ EXPORT_SYMBOL_GPL(kgdb_register_io_module);
 
 /**
  *	kkgdb_unregister_io_module - unregister KGDB IO module
- *	@old_kgdb_io_ops: the io ops vector
+ *	@old_dbg_io_ops: the io ops vector
  *
  *	Unregister it with the KGDB core.
  */
-void kgdb_unregister_io_module(struct kgdb_io *old_kgdb_io_ops)
+void kgdb_unregister_io_module(struct kgdb_io *old_dbg_io_ops)
 {
 	BUG_ON(kgdb_connected);
 
@@ -1721,14 +807,14 @@ void kgdb_unregister_io_module(struct kgdb_io *old_kgdb_io_ops)
 
 	spin_lock(&kgdb_registration_lock);
 
-	WARN_ON_ONCE(kgdb_io_ops != old_kgdb_io_ops);
-	kgdb_io_ops = NULL;
+	WARN_ON_ONCE(dbg_io_ops != old_dbg_io_ops);
+	dbg_io_ops = NULL;
 
 	spin_unlock(&kgdb_registration_lock);
 
 	printk(KERN_INFO
 		"kgdb: Unregistered I/O driver %s, debugger disabled.\n",
-		old_kgdb_io_ops->name);
+		old_dbg_io_ops->name);
 }
 EXPORT_SYMBOL_GPL(kgdb_unregister_io_module);
 
diff --git a/kernel/debug/debug_core.h b/kernel/debug/debug_core.h
new file mode 100644
index 0000000..ebfd5bb
--- /dev/null
+++ b/kernel/debug/debug_core.h
@@ -0,0 +1,49 @@
+/*
+ * Created by: Jason Wessel <jason.wessel at windriver.com>
+ *
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _DEBUG_CORE_H_
+#define _DEBUG_CORE_H_
+/*
+ * These are the private implementation headers between the kernel
+ * debugger core and the debugger front end code.
+ */
+
+/* kernel debug core data structures */
+struct kgdb_state {
+	int			ex_vector;
+	int			signo;
+	int			err_code;
+	int			cpu;
+	int			pass_exception;
+	unsigned long		thr_query;
+	unsigned long		threadid;
+	long			kgdb_usethreadid;
+	struct pt_regs		*linux_regs;
+};
+
+struct debuggerinfo_struct {
+	void			*debuggerinfo;
+	struct task_struct	*task;
+};
+
+extern struct debuggerinfo_struct kgdb_info[];
+extern struct kgdb_io *dbg_io_ops;
+
+/* kernel debug core break point routines */
+extern int dbg_remove_all_break(void);
+extern int dbg_set_sw_break(unsigned long addr);
+extern int dbg_remove_sw_break(unsigned long addr);
+extern int dbg_activate_sw_breakpoints(void);
+
+/* gdbstub interface functions */
+extern int gdb_serial_stub(struct kgdb_state *ks);
+extern void gdbstub_msg_write(const char *s, int len);
+
+#endif /* _DEBUG_CORE_H_ */
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
new file mode 100644
index 0000000..ab29bce
--- /dev/null
+++ b/kernel/debug/gdbstub.c
@@ -0,0 +1,939 @@
+/*
+ * Kernel Debug Core
+ *
+ * Maintainer: Jason Wessel <jason.wessel at windriver.com>
+ *
+ * Copyright (C) 2000-2001 VERITAS Software Corporation.
+ * Copyright (C) 2002-2004 Timesys Corporation
+ * Copyright (C) 2003-2004 Amit S. Kale <amitkale at linsyssoft.com>
+ * Copyright (C) 2004 Pavel Machek <pavel at suse.cz>
+ * Copyright (C) 2004-2006 Tom Rini <trini at kernel.crashing.org>
+ * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
+ * Copyright (C) 2005-2009 Wind River Systems, Inc.
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo at redhat.com>
+ *
+ * Contributors at various stages not listed above:
+ *  Jason Wessel ( jason.wessel at windriver.com )
+ *  George Anzinger <george at mvista.com>
+ *  Anurekh Saxena (anurekh.saxena at timesys.com)
+ *  Lake Stevens Instrument Division (Glenn Engel)
+ *  Jim Kingdon, Cygnus Support.
+ *
+ * Original KGDB stub: David Grothe <dave at gcom.com>,
+ * Tigran Aivazian <tigran at sco.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kgdb.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <asm/cacheflush.h>
+#include <asm/unaligned.h>
+#include "debug_core.h"
+
+#define KGDB_MAX_THREAD_QUERY 17
+
+/* Our I/O buffers. */
+static char			remcom_in_buffer[BUFMAX];
+static char			remcom_out_buffer[BUFMAX];
+
+/* Storage for the registers, in GDB format. */
+static unsigned long		gdb_regs[(NUMREGBYTES +
+					sizeof(unsigned long) - 1) /
+					sizeof(unsigned long)];
+
+/*
+ * GDB remote protocol parser:
+ */
+
+static int hex(char ch)
+{
+	if ((ch >= 'a') && (ch <= 'f'))
+		return ch - 'a' + 10;
+	if ((ch >= '0') && (ch <= '9'))
+		return ch - '0';
+	if ((ch >= 'A') && (ch <= 'F'))
+		return ch - 'A' + 10;
+	return -1;
+}
+
+/* scan for the sequence $<data>#<checksum> */
+static void get_packet(char *buffer)
+{
+	unsigned char checksum;
+	unsigned char xmitcsum;
+	int count;
+	char ch;
+
+	do {
+		/*
+		 * Spin and wait around for the start character, ignore all
+		 * other characters:
+		 */
+		while ((ch = (dbg_io_ops->read_char())) != '$')
+			/* nothing */;
+
+		kgdb_connected = 1;
+		checksum = 0;
+		xmitcsum = -1;
+
+		count = 0;
+
+		/*
+		 * now, read until a # or end of buffer is found:
+		 */
+		while (count < (BUFMAX - 1)) {
+			ch = dbg_io_ops->read_char();
+			if (ch == '#')
+				break;
+			checksum = checksum + ch;
+			buffer[count] = ch;
+			count = count + 1;
+		}
+		buffer[count] = 0;
+
+		if (ch == '#') {
+			xmitcsum = hex(dbg_io_ops->read_char()) << 4;
+			xmitcsum += hex(dbg_io_ops->read_char());
+
+			if (checksum != xmitcsum)
+				/* failed checksum */
+				dbg_io_ops->write_char('-');
+			else
+				/* successful transfer */
+				dbg_io_ops->write_char('+');
+			if (dbg_io_ops->flush)
+				dbg_io_ops->flush();
+		}
+	} while (checksum != xmitcsum);
+}
+
+/*
+ * Send the packet in buffer.
+ * Check for gdb connection if asked for.
+ */
+static void put_packet(char *buffer)
+{
+	unsigned char checksum;
+	int count;
+	char ch;
+
+	/*
+	 * $<packet info>#<checksum>.
+	 */
+	while (1) {
+		dbg_io_ops->write_char('$');
+		checksum = 0;
+		count = 0;
+
+		while ((ch = buffer[count])) {
+			dbg_io_ops->write_char(ch);
+			checksum += ch;
+			count++;
+		}
+
+		dbg_io_ops->write_char('#');
+		dbg_io_ops->write_char(hex_asc_hi(checksum));
+		dbg_io_ops->write_char(hex_asc_lo(checksum));
+		if (dbg_io_ops->flush)
+			dbg_io_ops->flush();
+
+		/* Now see what we get in reply. */
+		ch = dbg_io_ops->read_char();
+
+		if (ch == 3)
+			ch = dbg_io_ops->read_char();
+
+		/* If we get an ACK, we are done. */
+		if (ch == '+')
+			return;
+
+		/*
+		 * If we get the start of another packet, this means
+		 * that GDB is attempting to reconnect.  We will NAK
+		 * the packet being sent, and stop trying to send this
+		 * packet.
+		 */
+		if (ch == '$') {
+			dbg_io_ops->write_char('-');
+			if (dbg_io_ops->flush)
+				dbg_io_ops->flush();
+			return;
+		}
+	}
+}
+
+static char gdbmsgbuf[BUFMAX + 1];
+
+void gdbstub_msg_write(const char *s, int len)
+{
+	char *bufptr;
+	int wcount;
+	int i;
+
+	/* 'O'utput */
+	gdbmsgbuf[0] = 'O';
+
+	/* Fill and send buffers... */
+	while (len > 0) {
+		bufptr = gdbmsgbuf + 1;
+
+		/* Calculate how many this time */
+		if ((len << 1) > (BUFMAX - 2))
+			wcount = (BUFMAX - 2) >> 1;
+		else
+			wcount = len;
+
+		/* Pack in hex chars */
+		for (i = 0; i < wcount; i++)
+			bufptr = pack_hex_byte(bufptr, s[i]);
+		*bufptr = '\0';
+
+		/* Move up */
+		s += wcount;
+		len -= wcount;
+
+		/* Write packet */
+		put_packet(gdbmsgbuf);
+	}
+}
+
+/*
+ * Convert the memory pointed to by mem into hex, placing result in
+ * buf.  Return a pointer to the last char put in buf (null). May
+ * return an error.
+ */
+int kgdb_mem2hex(char *mem, char *buf, int count)
+{
+	char *tmp;
+	int err;
+
+	/*
+	 * We use the upper half of buf as an intermediate buffer for the
+	 * raw memory copy.  Hex conversion will work against this one.
+	 */
+	tmp = buf + count;
+
+	err = probe_kernel_read(tmp, mem, count);
+	if (!err) {
+		while (count > 0) {
+			buf = pack_hex_byte(buf, *tmp);
+			tmp++;
+			count--;
+		}
+
+		*buf = 0;
+	}
+
+	return err;
+}
+
+/*
+ * Convert the hex array pointed to by buf into binary to be placed in
+ * mem.  Return a pointer to the character AFTER the last byte
+ * written.  May return an error.
+ */
+int kgdb_hex2mem(char *buf, char *mem, int count)
+{
+	char *tmp_raw;
+	char *tmp_hex;
+
+	/*
+	 * We use the upper half of buf as an intermediate buffer for the
+	 * raw memory that is converted from hex.
+	 */
+	tmp_raw = buf + count * 2;
+
+	tmp_hex = tmp_raw - 1;
+	while (tmp_hex >= buf) {
+		tmp_raw--;
+		*tmp_raw = hex(*tmp_hex--);
+		*tmp_raw |= hex(*tmp_hex--) << 4;
+	}
+
+	return probe_kernel_write(mem, tmp_raw, count);
+}
+
+/*
+ * While we find nice hex chars, build a long_val.
+ * Return number of chars processed.
+ */
+int kgdb_hex2long(char **ptr, unsigned long *long_val)
+{
+	int hex_val;
+	int num = 0;
+	int negate = 0;
+
+	*long_val = 0;
+
+	if (**ptr == '-') {
+		negate = 1;
+		(*ptr)++;
+	}
+	while (**ptr) {
+		hex_val = hex(**ptr);
+		if (hex_val < 0)
+			break;
+
+		*long_val = (*long_val << 4) | hex_val;
+		num++;
+		(*ptr)++;
+	}
+
+	if (negate)
+		*long_val = -*long_val;
+
+	return num;
+}
+
+/*
+ * Copy the binary array pointed to by buf into mem.  Fix $, #, and
+ * 0x7d escaped with 0x7d.  Return a pointer to the character after
+ * the last byte written.
+ */
+static int kgdb_ebin2mem(char *buf, char *mem, int count)
+{
+	int err = 0;
+	char c;
+
+	while (count-- > 0) {
+		c = *buf++;
+		if (c == 0x7d)
+			c = *buf++ ^ 0x20;
+
+		err = probe_kernel_write(mem, &c, 1);
+		if (err)
+			break;
+
+		mem++;
+	}
+
+	return err;
+}
+
+/* Write memory due to an 'M' or 'X' packet. */
+static int write_mem_msg(int binary)
+{
+	char *ptr = &remcom_in_buffer[1];
+	unsigned long addr;
+	unsigned long length;
+	int err;
+
+	if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
+	    kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
+		if (binary)
+			err = kgdb_ebin2mem(ptr, (char *)addr, length);
+		else
+			err = kgdb_hex2mem(ptr, (char *)addr, length);
+		if (err)
+			return err;
+		if (CACHE_FLUSH_IS_SAFE)
+			flush_icache_range(addr, addr + length);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static void error_packet(char *pkt, int error)
+{
+	error = -error;
+	pkt[0] = 'E';
+	pkt[1] = hex_asc[(error / 10)];
+	pkt[2] = hex_asc[(error % 10)];
+	pkt[3] = '\0';
+}
+
+/*
+ * Thread ID accessors. We represent a flat TID space to GDB, where
+ * the per CPU idle threads (which under Linux all have PID 0) are
+ * remapped to negative TIDs.
+ */
+
+#define BUF_THREAD_ID_SIZE	16
+
+static char *pack_threadid(char *pkt, unsigned char *id)
+{
+	char *limit;
+
+	limit = pkt + BUF_THREAD_ID_SIZE;
+	while (pkt < limit)
+		pkt = pack_hex_byte(pkt, *id++);
+
+	return pkt;
+}
+
+static void int_to_threadref(unsigned char *id, int value)
+{
+	unsigned char *scan;
+	int i = 4;
+
+	scan = (unsigned char *)id;
+	while (i--)
+		*scan++ = 0;
+	put_unaligned_be32(value, scan);
+}
+
+static struct task_struct *getthread(struct pt_regs *regs, int tid)
+{
+	/*
+	 * Non-positive TIDs are remapped to the cpu shadow information
+	 */
+	if (tid == 0 || tid == -1)
+		tid = -atomic_read(&kgdb_active) - 2;
+	if (tid < -1 && tid > -NR_CPUS - 2) {
+		if (kgdb_info[-tid - 2].task)
+			return kgdb_info[-tid - 2].task;
+		else
+			return idle_task(-tid - 2);
+	}
+	if (tid <= 0) {
+		printk(KERN_ERR "KGDB: Internal thread select error\n");
+		dump_stack();
+		return NULL;
+	}
+
+	/*
+	 * find_task_by_pid_ns() does not take the tasklist lock anymore
+	 * but is nicely RCU locked - hence is a pretty resilient
+	 * thing to use:
+	 */
+	return find_task_by_pid_ns(tid, &init_pid_ns);
+}
+
+
+/*
+ * Remap normal tasks to their real PID,
+ * CPU shadow threads are mapped to -CPU - 2
+ */
+static inline int shadow_pid(int realpid)
+{
+	if (realpid)
+		return realpid;
+
+	return -raw_smp_processor_id() - 2;
+}
+
+/*
+ * All the functions that start with gdb_cmd are the various
+ * operations to implement the handlers for the gdbserial protocol
+ * where KGDB is communicating with an external debugger
+ */
+
+/* Handle the '?' status packets */
+static void gdb_cmd_status(struct kgdb_state *ks)
+{
+	/*
+	 * We know that this packet is only sent
+	 * during initial connect.  So to be safe,
+	 * we clear out our breakpoints now in case
+	 * GDB is reconnecting.
+	 */
+	dbg_remove_all_break();
+
+	remcom_out_buffer[0] = 'S';
+	pack_hex_byte(&remcom_out_buffer[1], ks->signo);
+}
+
+/* Handle the 'g' get registers request */
+static void gdb_cmd_getregs(struct kgdb_state *ks)
+{
+	struct task_struct *thread;
+	void *local_debuggerinfo;
+	int i;
+
+	thread = kgdb_usethread;
+	if (!thread) {
+		thread = kgdb_info[ks->cpu].task;
+		local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
+	} else {
+		local_debuggerinfo = NULL;
+		for_each_online_cpu(i) {
+			/*
+			 * Try to find the task on some other
+			 * or possibly this node if we do not
+			 * find the matching task then we try
+			 * to approximate the results.
+			 */
+			if (thread == kgdb_info[i].task)
+				local_debuggerinfo = kgdb_info[i].debuggerinfo;
+		}
+	}
+
+	/*
+	 * All threads that don't have debuggerinfo should be
+	 * in schedule() sleeping, since all other CPUs
+	 * are in kgdb_wait, and thus have debuggerinfo.
+	 */
+	if (local_debuggerinfo) {
+		pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
+	} else {
+		/*
+		 * Pull stuff saved during switch_to; nothing
+		 * else is accessible (or even particularly
+		 * relevant).
+		 *
+		 * This should be enough for a stack trace.
+		 */
+		sleeping_thread_to_gdb_regs(gdb_regs, thread);
+	}
+	kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
+}
+
+/* Handle the 'G' set registers request */
+static void gdb_cmd_setregs(struct kgdb_state *ks)
+{
+	kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
+
+	if (kgdb_usethread && kgdb_usethread != current) {
+		error_packet(remcom_out_buffer, -EINVAL);
+	} else {
+		gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
+		strcpy(remcom_out_buffer, "OK");
+	}
+}
+
+/* Handle the 'm' memory read bytes */
+static void gdb_cmd_memread(struct kgdb_state *ks)
+{
+	char *ptr = &remcom_in_buffer[1];
+	unsigned long length;
+	unsigned long addr;
+	int err;
+
+	if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
+					kgdb_hex2long(&ptr, &length) > 0) {
+		err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
+		if (err)
+			error_packet(remcom_out_buffer, err);
+	} else {
+		error_packet(remcom_out_buffer, -EINVAL);
+	}
+}
+
+/* Handle the 'M' memory write bytes */
+static void gdb_cmd_memwrite(struct kgdb_state *ks)
+{
+	int err = write_mem_msg(0);
+
+	if (err)
+		error_packet(remcom_out_buffer, err);
+	else
+		strcpy(remcom_out_buffer, "OK");
+}
+
+/* Handle the 'X' memory binary write bytes */
+static void gdb_cmd_binwrite(struct kgdb_state *ks)
+{
+	int err = write_mem_msg(1);
+
+	if (err)
+		error_packet(remcom_out_buffer, err);
+	else
+		strcpy(remcom_out_buffer, "OK");
+}
+
+/* Handle the 'D' or 'k', detach or kill packets */
+static void gdb_cmd_detachkill(struct kgdb_state *ks)
+{
+	int error;
+
+	/* The detach case */
+	if (remcom_in_buffer[0] == 'D') {
+		error = dbg_remove_all_break();
+		if (error < 0) {
+			error_packet(remcom_out_buffer, error);
+		} else {
+			strcpy(remcom_out_buffer, "OK");
+			kgdb_connected = 0;
+		}
+		put_packet(remcom_out_buffer);
+	} else {
+		/*
+		 * Assume the kill case, with no exit code checking,
+		 * trying to force detach the debugger:
+		 */
+		dbg_remove_all_break();
+		kgdb_connected = 0;
+	}
+}
+
+/* Handle the 'R' reboot packets */
+static int gdb_cmd_reboot(struct kgdb_state *ks)
+{
+	/* For now, only honor R0 */
+	if (strcmp(remcom_in_buffer, "R0") == 0) {
+		printk(KERN_CRIT "Executing emergency reboot\n");
+		strcpy(remcom_out_buffer, "OK");
+		put_packet(remcom_out_buffer);
+
+		/*
+		 * Execution should not return from
+		 * machine_emergency_restart()
+		 */
+		machine_emergency_restart();
+		kgdb_connected = 0;
+
+		return 1;
+	}
+	return 0;
+}
+
+/* Handle the 'q' query packets */
+static void gdb_cmd_query(struct kgdb_state *ks)
+{
+	struct task_struct *g;
+	struct task_struct *p;
+	unsigned char thref[8];
+	char *ptr;
+	int i;
+	int cpu;
+	int finished = 0;
+
+	switch (remcom_in_buffer[1]) {
+	case 's':
+	case 'f':
+		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
+			error_packet(remcom_out_buffer, -EINVAL);
+			break;
+		}
+
+		i = 0;
+		remcom_out_buffer[0] = 'm';
+		ptr = remcom_out_buffer + 1;
+		if (remcom_in_buffer[1] == 'f') {
+			/* Each cpu is a shadow thread */
+			for_each_online_cpu(cpu) {
+				ks->thr_query = 0;
+				int_to_threadref(thref, -cpu - 2);
+				pack_threadid(ptr, thref);
+				ptr += BUF_THREAD_ID_SIZE;
+				*(ptr++) = ',';
+				i++;
+			}
+		}
+
+		do_each_thread(g, p) {
+			if (i >= ks->thr_query && !finished) {
+				int_to_threadref(thref, p->pid);
+				pack_threadid(ptr, thref);
+				ptr += BUF_THREAD_ID_SIZE;
+				*(ptr++) = ',';
+				ks->thr_query++;
+				if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
+					finished = 1;
+			}
+			i++;
+		} while_each_thread(g, p);
+
+		*(--ptr) = '\0';
+		break;
+
+	case 'C':
+		/* Current thread id */
+		strcpy(remcom_out_buffer, "QC");
+		ks->threadid = shadow_pid(current->pid);
+		int_to_threadref(thref, ks->threadid);
+		pack_threadid(remcom_out_buffer + 2, thref);
+		break;
+	case 'T':
+		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
+			error_packet(remcom_out_buffer, -EINVAL);
+			break;
+		}
+		ks->threadid = 0;
+		ptr = remcom_in_buffer + 17;
+		kgdb_hex2long(&ptr, &ks->threadid);
+		if (!getthread(ks->linux_regs, ks->threadid)) {
+			error_packet(remcom_out_buffer, -EINVAL);
+			break;
+		}
+		if ((int)ks->threadid > 0) {
+			kgdb_mem2hex(getthread(ks->linux_regs,
+					ks->threadid)->comm,
+					remcom_out_buffer, 16);
+		} else {
+			static char tmpstr[23 + BUF_THREAD_ID_SIZE];
+
+			sprintf(tmpstr, "shadowCPU%d",
+					(int)(-ks->threadid - 2));
+			kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
+		}
+		break;
+	}
+}
+
+/* Handle the 'H' task query packets */
+static void gdb_cmd_task(struct kgdb_state *ks)
+{
+	struct task_struct *thread;
+	char *ptr;
+
+	switch (remcom_in_buffer[1]) {
+	case 'g':
+		ptr = &remcom_in_buffer[2];
+		kgdb_hex2long(&ptr, &ks->threadid);
+		thread = getthread(ks->linux_regs, ks->threadid);
+		if (!thread && ks->threadid > 0) {
+			error_packet(remcom_out_buffer, -EINVAL);
+			break;
+		}
+		kgdb_usethread = thread;
+		ks->kgdb_usethreadid = ks->threadid;
+		strcpy(remcom_out_buffer, "OK");
+		break;
+	case 'c':
+		ptr = &remcom_in_buffer[2];
+		kgdb_hex2long(&ptr, &ks->threadid);
+		if (!ks->threadid) {
+			kgdb_contthread = NULL;
+		} else {
+			thread = getthread(ks->linux_regs, ks->threadid);
+			if (!thread && ks->threadid > 0) {
+				error_packet(remcom_out_buffer, -EINVAL);
+				break;
+			}
+			kgdb_contthread = thread;
+		}
+		strcpy(remcom_out_buffer, "OK");
+		break;
+	}
+}
+
+/* Handle the 'T' thread query packets */
+static void gdb_cmd_thread(struct kgdb_state *ks)
+{
+	char *ptr = &remcom_in_buffer[1];
+	struct task_struct *thread;
+
+	kgdb_hex2long(&ptr, &ks->threadid);
+	thread = getthread(ks->linux_regs, ks->threadid);
+	if (thread)
+		strcpy(remcom_out_buffer, "OK");
+	else
+		error_packet(remcom_out_buffer, -EINVAL);
+}
+
+/* Handle the 'z' or 'Z' breakpoint remove or set packets */
+static void gdb_cmd_break(struct kgdb_state *ks)
+{
+	/*
+	 * Since GDB-5.3, it's been drafted that '0' is a software
+	 * breakpoint, '1' is a hardware breakpoint, so let's do that.
+	 */
+	char *bpt_type = &remcom_in_buffer[1];
+	char *ptr = &remcom_in_buffer[2];
+	unsigned long addr;
+	unsigned long length;
+	int error = 0;
+
+	if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
+		/* Unsupported */
+		if (*bpt_type > '4')
+			return;
+	} else {
+		if (*bpt_type != '0' && *bpt_type != '1')
+			/* Unsupported. */
+			return;
+	}
+
+	/*
+	 * Test if this is a hardware breakpoint, and
+	 * if we support it:
+	 */
+	if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
+		/* Unsupported. */
+		return;
+
+	if (*(ptr++) != ',') {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+	if (!kgdb_hex2long(&ptr, &addr)) {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+	if (*(ptr++) != ',' ||
+		!kgdb_hex2long(&ptr, &length)) {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+
+	if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
+		error = dbg_set_sw_break(addr);
+	else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
+		error = dbg_remove_sw_break(addr);
+	else if (remcom_in_buffer[0] == 'Z')
+		error = arch_kgdb_ops.set_hw_breakpoint(addr,
+			(int)length, *bpt_type - '0');
+	else if (remcom_in_buffer[0] == 'z')
+		error = arch_kgdb_ops.remove_hw_breakpoint(addr,
+			(int) length, *bpt_type - '0');
+
+	if (error == 0)
+		strcpy(remcom_out_buffer, "OK");
+	else
+		error_packet(remcom_out_buffer, error);
+}
+
+/* Handle the 'C' signal / exception passing packets */
+static int gdb_cmd_exception_pass(struct kgdb_state *ks)
+{
+	/* C09 == pass exception
+	 * C15 == detach kgdb, pass exception
+	 */
+	if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
+
+		ks->pass_exception = 1;
+		remcom_in_buffer[0] = 'c';
+
+	} else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
+
+		ks->pass_exception = 1;
+		remcom_in_buffer[0] = 'D';
+		dbg_remove_all_break();
+		kgdb_connected = 0;
+		return 1;
+
+	} else {
+		gdbstub_msg_write("KGDB only knows signal 9 (pass)"
+			" and 15 (pass and disconnect)\n"
+			"Executing a continue without signal passing\n", 0);
+		remcom_in_buffer[0] = 'c';
+	}
+
+	/* Indicate fall through */
+	return -1;
+}
+
+/*
+ * This function performs all gdbserial command procesing
+ */
+int gdb_serial_stub(struct kgdb_state *ks)
+{
+	int error = 0;
+	int tmp;
+
+	/* Clear the out buffer. */
+	memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
+
+	if (kgdb_connected) {
+		unsigned char thref[8];
+		char *ptr;
+
+		/* Reply to host that an exception has occurred */
+		ptr = remcom_out_buffer;
+		*ptr++ = 'T';
+		ptr = pack_hex_byte(ptr, ks->signo);
+		ptr += strlen(strcpy(ptr, "thread:"));
+		int_to_threadref(thref, shadow_pid(current->pid));
+		ptr = pack_threadid(ptr, thref);
+		*ptr++ = ';';
+		put_packet(remcom_out_buffer);
+	}
+
+	kgdb_usethread = kgdb_info[ks->cpu].task;
+	ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
+	ks->pass_exception = 0;
+
+	while (1) {
+		error = 0;
+
+		/* Clear the out buffer. */
+		memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
+
+		get_packet(remcom_in_buffer);
+
+		switch (remcom_in_buffer[0]) {
+		case '?': /* gdbserial status */
+			gdb_cmd_status(ks);
+			break;
+		case 'g': /* return the value of the CPU registers */
+			gdb_cmd_getregs(ks);
+			break;
+		case 'G': /* set the value of the CPU registers - return OK */
+			gdb_cmd_setregs(ks);
+			break;
+		case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+			gdb_cmd_memread(ks);
+			break;
+		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
+			gdb_cmd_memwrite(ks);
+			break;
+		case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
+			gdb_cmd_binwrite(ks);
+			break;
+			/* kill or detach. KGDB should treat this like a
+			 * continue.
+			 */
+		case 'D': /* Debugger detach */
+		case 'k': /* Debugger detach via kill */
+			gdb_cmd_detachkill(ks);
+			goto default_handle;
+		case 'R': /* Reboot */
+			if (gdb_cmd_reboot(ks))
+				goto default_handle;
+			break;
+		case 'q': /* query command */
+			gdb_cmd_query(ks);
+			break;
+		case 'H': /* task related */
+			gdb_cmd_task(ks);
+			break;
+		case 'T': /* Query thread status */
+			gdb_cmd_thread(ks);
+			break;
+		case 'z': /* Break point remove */
+		case 'Z': /* Break point set */
+			gdb_cmd_break(ks);
+			break;
+		case 'C': /* Exception passing */
+			tmp = gdb_cmd_exception_pass(ks);
+			if (tmp > 0)
+				goto default_handle;
+			if (tmp == 0)
+				break;
+			/* Fall through on tmp < 0 */
+		case 'c': /* Continue packet */
+		case 's': /* Single step packet */
+			if (kgdb_contthread && kgdb_contthread != current) {
+				/* Can't switch threads in kgdb */
+				error_packet(remcom_out_buffer, -EINVAL);
+				break;
+			}
+			dbg_activate_sw_breakpoints();
+			/* Fall through to default processing */
+		default:
+default_handle:
+			error = kgdb_arch_handle_exception(ks->ex_vector,
+						ks->signo,
+						ks->err_code,
+						remcom_in_buffer,
+						remcom_out_buffer,
+						ks->linux_regs);
+			/*
+			 * Leave cmd processing on error, detach,
+			 * kill, continue, or single step.
+			 */
+			if (error >= 0 || remcom_in_buffer[0] == 'D' ||
+			    remcom_in_buffer[0] == 'k') {
+				error = 0;
+				goto kgdb_exit;
+			}
+
+		}
+
+		/* reply to the request */
+		put_packet(remcom_out_buffer);
+	}
+
+kgdb_exit:
+	if (ks->pass_exception)
+		error = 1;
+	return error;
+}
-- 
1.6.4.rc1



[Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Free Online Dating]     [Linux Kernel]     [Linux SCSI]     [XFree86]

Add to Google Powered by Linux