[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Google
  Web www.spinics.net

Re: [Stgt-devel] [ofa-general] Re: Calculating the VA iniSER header



On Thu, May 1, 2008 at 11:24 AM, Ken Sandars <kensandars@xxxxxxxxxxx> wrote:
>
> >> [Ken] It appears the current Linux iSER initiator does not send the HELLO
> message when
>
> >> the connection transits to full feature phase. The stgt target also
> ignores this
> >> message (if it were to appear).
> [Ken] The IBTA document does not mention the HELLO/HELLOREPLY messages.
> Implementing this message exchange gives a distinction between the current
> implementations
> and those that will correctly calculate the write_va (as per Pete Wyckoff's
> option 3).

I agree.

>
> >> [Ken] Both of these implementations use a non-conformant iSER header
> (they add
>
> >> write_va and read_va fields, which incidentally do not appear to be
> used). Are
> >> these changes documented anywhere in the IB domain, or are these
> variations
> >> needed for another reason?
> >
> > [Erez] Take a look at the iSER for IB annex:
>
> > http://www.infinibandta.org/members/spec/Annex_iSER.PDF
>
> [Ken] Ouch. That link requires a username/password. Looks like it is only
> available to members
> of the Infiniband Trade Association. Fortunately I gained access to it with
> username "open" and
> password "standard". ;-)
>
> [Ken] Neither of these implementations send or examine the iSER CM REQ/REP
> message private data.
> The document doesn't define what action to take when this message is
> absent. Interestingly,
> when the target reports that "ZBVA shall be used for this connection" and
> "the target shall issue
> Send with Invalidate as needed" then it appears the iSER header specified in
> RFC5046 should be
> used for control-type PDUs. Is there any plan to conform with the list of
> requirements for IBTA
> compliance?

At the moment these capabilities (ZBVA, Send Invalidate) are not
supported in the driver,
though they seem to be supported by the ConnectX HCA.
Hence, iSER implementation do not send/examine them.
This may be added to the CM REQ/REP with the current defaults but in
order to use these capabilities a code
should be added to the HCA driver and iser.

>
> Cheers,
> Ken
>
> ________________________________
> Hotmail on your mobile. Never miss another e-mail with
_______________________________________________
Ips mailing list
Ips@xxxxxxxx
https://www.ietf.org/mailman/listinfo/ips

[IETF]     [Linux iSCSI]     [Linux SCSI]     [Linux Resources]     [Yosemite News]     [IETF Announcements]     [IETF Discussion]     [SCSI]

Add to Google Powered by Linux