| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] |
I connect the management port of controller B of IBM totalStorage DS300 with a cross cable to a linux machine. According to docs, the default IP address of controller B is 192.168.70.124/255.255.0.0. see 4.4.1 Setup of management ports of TotalStorage DS300 and DS400 in IBM TotalStorage - DS300 and DS400 / Best Practices Guide. So I set the linux ip address to 192.168.70.1/255.255.0.0. while pinging 192.168.70.124 , I power up controller B of IBM totalStorage. I tried three times this power down and power up; I get some answers for this ping (about 4 or 5) and then there are no answers. Also of course there is no telnet to 192.168.70.124. Could it be that someone had changed the IP ? an in case it is so - how can I see the real IP address ? Regards, Ian ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ linux-iscsi-users mailing list linux-iscsi-users@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/linux-iscsi-users
[IP Storage] [IETF] [Linux SCSI] [iSCSI Book] [Linux Resources] [Yosemite News] [Photo] [Home] [IETF Announcements] [IETF Discussion] [SCSI Hardware]