Re: linux-iscsi and VTrak 15200

[Jan Dries <jan.dries@xxxxxxxxxxxxxxxxx>]

Jan Dries wrote:
> I'm trying to connect to a Promise VTrak 15200 using linux-iscsi-4.0.2. This
> doesn't seem to work. The symptoms I observe are similar to those in an
> earlier posting about 4.0.1.11
> (http://sourceforge.net/mailarchive/forum.php?thread_id=6681419&forum_id=1783).
> As noted by that poster, it does work for 4.0.1.10. However, since 4.0.2 is
> the latest stable version, I would prefer to use that instead of the
> 4.0.1.10. 
> Does anyone if it is possible (and if so how) to make 4.0.2 work with a Vtrak
> 15200?

Apparently I end up answering my own question.
After further experimenting with parameters on both linux-iscsi side and 
VTrak side, I've figured out what the problem is.
Apparently the VTrak target doesn't support ImmediateData, hence 
ImmediateData=no must be specified in iscsi.conf.
After setting that, the VTrak 15200 now works fine in combination with 
linux-iscsi-4.0.2.
I presume the option defaulted to "no" in versions up to 4.0.1.10, and 
to "yes" in subsequent versions.

Regards,
Jan


-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
linux-iscsi-users mailing list
linux-iscsi-users@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/linux-iscsi-users