Please Disregard -- Re: RFC 6329 on IS-IS Extensions Supporting IEEE 802.1aq Shortest Path Bridging

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Greetings All,

Please disregard this announcement.  A corrected announcement will be
sent shortly.

Thank you,
RFC Editor

On Fri, Apr 20, 2012 at 04:00:55PM -0700, RFC Editor wrote:
> 
> A new Request for Comments is now available in online RFC libraries.
> 
>         
>         RFC 6329
> 
>         Title:      IS-IS Extensions Supporting IEEE 802.1aq 
>                     Shortest Path Bridging 
>         Author:     D. Fedyk, Ed.,
>                     P. Ashwood-Smith, Ed.,
>                     D. Allan, A. Bragg,
>                     P. Unbehagen
>         Status:     Standards Track
>         Stream:     IETF
>         Date:       April 2012
>         Mailbox:    Donald.Fedyk@alcatel-lucent.com, 
>                     Peter.AshwoodSmith@huawei.com, 
>                     david.i.allan@ericsson.com,
>   nbragg@ciena.com, 
>                     unbehagen@avaya.com
>         Pages:      37
>         Characters: 88465
>         Updates/Obsoletes/SeeAlso:   None
> 
>         I-D Tag:    draft-ietf-isis-ieee-aq-05.txt
> 
>         URL:        http://www.rfc-editor.org/rfc/rfc6329.txt
> 
> 802.1aq Shortest Path Bridging (SPB) has been standardized by the IEEE
> as the next step in the evolution of the various spanning tree and
> registration protocols.  802.1aq allows for true shortest path
> forwarding in a mesh Ethernet network context utilizing multiple equal
> cost paths.  This permits it to support much larger Layer 2 topologies,
> with faster convergence, and vastly improved use of the mesh
> topology.  Combined with this is single point provisioning for logical
> connectivity membership, which includes point-to-point,
> point-to-multipoint, and multipoint-to-multipoint variations.  This
> memo documents the IS-IS changes required to support this IEEE
> protocol and provides some context and examples.  [STANDARDS-TRACK]
> 
> This document is a product of the IS-IS for IP Internets Working Group of the IETF.
> 
> This is now a Proposed Standard Protocol.
> 
> STANDARDS TRACK: This document specifies an Internet standards track
> protocol for the Internet community,and requests discussion and suggestions
> for improvements.  Please refer to the current edition of the Internet
> Official Protocol Standards (STD 1) for the standardization state and
> status of this protocol.  Distribution of this memo is unlimited.
> 
> This announcement is sent to the IETF-Announce and rfc-dist lists.
> To subscribe or unsubscribe, see
>   http://www.ietf.org/mailman/listinfo/ietf-announce
>   http://mailman.rfc-editor.org/mailman/listinfo/rfc-dist
> 
> For searching the RFC series, see http://www.rfc-editor.org/rfcsearch.html.
> For downloading RFCs, see http://www.rfc-editor.org/rfc.html.
> 
> Requests for special distribution should be addressed to either the
> author of the RFC in question, or to rfc-editor@rfc-editor.org.  Unless
> specifically noted otherwise on the RFC itself, all RFCs are for
> unlimited distribution.
> 
> 
> The RFC Editor Team
> Association Management Solutions, LLC
> 


[Index of Archives]     [IETF]     [IETF Discussion]     [Linux Kernel]

  Powered by Linux