[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Why is the videophone endpoint not accepting this call?



Jan

Looking at the log. Try Turning off the Fast Start setting in Ekiga. That
might work.

Simon

-----Original Message-----
From: Jan Willamowius [mailto:jan@xxxxxxxxxxxxxx] 
Sent: 14 December 2011 09:52
To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Subject: Re:  Why is the videophone endpoint not accepting
this call?

Simon,

when you look at the trace, the messages are routed fine. Its just that the
Sorenson rejects the call.

Regards,
Jan

Simon Horne wrote:
> Marvin
> 
> Firstly don't use Ekiga it has known H.323 issues especially 
> registering to GnuGk . There are a number of other more compatible and 
> stable clients Jan mentioned earlier. I would recommend Mirial 
> www.mirial.com as a good start or another client that supports 
> RouteCallToGateway like Spranto. Make sure your client is registered 
> to the gatekeeper when you call the IP address and you have EXPLICIT in
your [RoutingPolicy] section.
> 
> Simon
> 
> -----Original Message-----
> From: MarvinHerbold [mailto:mherbold@xxxxxxxxxxxxxxxxx]
> Sent: 14 December 2011 08:40
> To: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Subject:  Why is the videophone endpoint not 
> accepting this call?
> 
> 
> The two endpoints are Ekiga running on a PC, and a Sorenson VP-200 at 
> the other end.  The Ekiga is placing a call to the gatekeeper, and I 
> am having the gatekeeper route the call to the Sorenson VP-200.
> 
> The RouteRequest I am getting is:
> RouteRequest|72.222.237.138:30002|unregistered|7120||Marvin:h323_ID|69
> RouteRequest|-0
> RouteRequest|0-ca-6a-d6-05-19-10-9e-90-00-24-e8-1c-86-17|74.208.147.64
> RouteRequest|0-ca-6a-d6-05-19-10-9e-90-00-24-e8-1c-86-17||e
> RouteRequest|kiga3.2.7
> (OPAL v3.6.8);
> 
> And I am responding with a:
> RouteToGateway Test 68.3.231.14 unregistered 7120
> 
> Note that I am not sure if the RouteToGateway is correct to use here...
> also, I am using 'Test' alias but really there are no registered 
> endpoints anywhere in the system... so I am not sure what I am 
> supposed to be using for the alias.
> 
> >From the attached log it does seem like the call is going to the 
> >Sorenson
> VP-200 but it is not getting accepted for some reason.  The Ekiga 
> screen says "The call has been rejected."  The Sorenson VP-200 never
rings.
> 
> I have uploaded the relevant part of the log file - I am not sure if I 
> have done it correctly...
> 
> http://old.nabble.com/file/p32971312/gnugk.txt gnugk.txt
> 
> Thanks for any insight!
> 
> Marvin

--
Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/

----------------------------------------------------------------------------
--
Systems Optimization Self Assessment
Improve efficiency and utilization of IT resources. Drive out cost and
improve service delivery. Take 5 minutes to use this Systems Optimization
Self Assessment. http://www.accelacomm.com/jaw/sdnl/114/51450054/
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/


------------------------------------------------------------------------------
Cloud Computing - Latest Buzzword or a Glimpse of the Future?
This paper surveys cloud computing today: What are the benefits? 
Why are businesses embracing it? What are its payoffs and pitfalls?
http://www.accelacomm.com/jaw/sdnl/114/51425149/
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/


[SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Singles Community]     [Yosemite News]

Add to Google Powered by Linux