Re: GDS failing to one site

[Jan Willamowius <jan@xxxxxxxxxxxxxx>]

You might need both. A look into your trace should tell you if the LRQ
for the inbound call that fails is coming from a direct neighbor or not.

Also, with ForwardLRQ=always its rather easy to create LRQ loops. I
would leave it as "depends" unless you are really sure you need
otherwise.

Regards,
Jan

Gina Bull wrote:
> Oooo. Here is what I had put in:
> 
> [RasSrv::LRQFeatures]
> AcceptNonNeighborLCF=1
> 
> Did I confuse LCF with LRQ, or do I need both?
> 
> Gina
> 
> On 11/8/2011 11:25 AM, Jan Willamowius wrote:
> > Hi Gina,
> >
> > I think GDS might need a switch to accept non-neighbor LRQs:
> >
> > [RasSrv::LRQFeatures]
> > AcceptNonNeighborLRQ=1
> >
> > But you really should check the logs at which point the incoming call
> > fails.
> >
> > Also, if you are installing a fresh GnuGk, you shouldn't start with an
> > old version. I would suggest you use the last release 2.3.5. That
> > probably won't fix your current issue, but why keep all the old bugs in
> > place that we have already fixed during the last couple of years ?
> >
> > Regards,
> > Jan
> >
> 


-- 
Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/

------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/