Re: Gimp won't reduce graphics to Print Size on printing

[Hedley Finger <hfinger@xxxxxxxxxxxxxxxxxx>]

Kent:

> The implementation team has to choose just what
> range of printers in what printer families it will
> support, and then cater to all their quirks, at the
> architecture, design, implementation, and testing
> stages.

I thought the whole point of the Windows GDI was that the programmer 
didn't have to know what the backend printer and its driver was.  The 
programmer makes the print output write to the GDI and the printer 
manufacturer's driver honours the calls made by the GDI.  Why does this 
sound too simple?

Regards,
Hedley

--

Hedley Finger

28 Regent Street   Camberwell VIC 3124   Australia
Tel. +61 3 9809 1229   Fax. (call phone first)
Mob. (cell) +61 412 461 558
Email. "Hedley Finger" <hfinger@xxxxxxxxxxxxxxxxxx>



------------------------------------

List archives: <http://groups.yahoo.com/group/gimpwin-users/>
To unsubscribe send a blank message from the address you're subscribed
to <mailto:gimpwin-users-unsubscribe@xxxxxxxxxxxxxxx>Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/gimpwin-users/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/gimpwin-users/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:gimpwin-users-digest@xxxxxxxxxxxxxxx 
    mailto:gimpwin-users-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    gimpwin-users-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/