Re: needs help, root inode gone after usb bus reset on sata disks

[Jelle de Jong <jelledejong@xxxxxxxxxxxxx>]

Theodore Tso wrote:
> On Thu, May 29, 2008 at 11:37:25AM +0200, Jelle de Jong wrote:
> > My humble excuse, i had to place the disk in a server and this server had 
> > an older version of the dumpe2fs tool that did not supported the superblock 
> > option. I upgraded the server and rerun all the test for you.
> >
> > dumpe2fs -o superblock=32768 /dev/sda1 > 
> > dumpe2fs-superblock-32768-info-sda1.txt 2>&1
> > dumpe2fs -o superblock=98304 /dev/sda1 > 
> > dumpe2fs-superblock-98304-info-sda1.txt 2>&1
>
> Unfortunately, it looks like the backup superblocks were also
> corrupted, and in the same way.  Did you *ever* run e2fsck in
> read/write mode (i.e., without the -n option) on this filesystem after
> when you think it had gotten corrupted?

yes i made one mistake the first time i run fsck /dev/sdX i answered yes 
 to the fist question (autoreponse), then i saw the second question and 
saw that it was the same issue as with the previous disk and cancel the 
fsck and reported my issue to the list.

> So what I will suggest at this point is that you do the following:
>
> debugfs -w /dev/sda1
> debugfs: features dir_index filetype sparse_super
> debugfs: quit
>
> The run "e2fsck -nf /dev/sda1" and make the output looks relatively
> clean. You should *not* see any messages about needing to relocate
> inode tables.
>
> If so, you can then run "e2fsck -f /dev/sda1 to fully recover the
> filesysten.
>
> > I always seem to get the impossible out of Linux tools, but most times this 
> > is during quality tests... however this was on "normal usage". I hope it 
> > has noting to do with the latest release changes or with corrupt binaries 
> > on my client system.
>
> Well, absolutely no one else reporting this problem or anything like
> it...

Ok, this did not when so great...

e2fsck -nf /dev/sda1 > e2fsck-nf-info-sda1.txt 2>&1
e2fsck -fy /dev/sda1 > e2fsck-fy-info-sda1.txt 2>&1

http://www.powercraft.nl/temp/e2fsck-nf-info-sda1.txt.gz
http://www.powercraft.nl/temp/e2fsck-fy-info-sda1.txt.gz (log is of an 
second resumed run)

root@ashley:/media/sda1# ls -hal
total 8.0K
drwxr-xr-x 3 root root 4.0K 2008-05-29 15:28 .
drwxr-xr-x 5 root root  200 2008-05-29 16:10 ..
drwx------ 2 root root 4.0K 2008-05-29 15:28 lost+found
root@ashley:/media/sda1# cd lost+found/
root@ashley:/media/sda1/lost+found# ls -hal
total 8.0K
drwx------ 2 root root 4.0K 2008-05-29 15:28 .
drwxr-xr-x 3 root root 4.0K 2008-05-29 15:28 ..
root@ashley:/media/sda1/lost+found# df -hal
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda1             688G  8.0K  653G   1% /media/sda1

nothing there anymore :-S :-S

I am going to restore the backup image back to sda1 it is 750GB so this 
takes a while (14 hours)

Any ideas what went wrong?




_______________________________________________
Ext3-users mailing list
Ext3-users@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ext3-users