<x-charset iso-8859-1>Regular documents print ok. Thanks, we have checked both these points and still the same problem. Best regards, Wayne ----- Original Message ----- From: "Alan Womack" <arwbackup@worldnet.att.net> To: "Majordomo leben.com" <epson-inkjet@leben.com> Sent: Sunday, September 23, 2001 4:57 PM Subject: re: Epson LQ 1070+ - skips labels > Do you have any trouble with other documents? Is it possible a setting for auto skip perforation is causing the problem? > > Have you tried using a Generic/Text driver going to that printer to see if that makes a difference? > > alan > > >> We have an Epson LQ 1070+ installed as a local printer on a Win 2000 > >> workstation. It is mainly used to print 1" x 3.5" labels. Previously it > >> was installed on a Win 95 workstation doing the same. On the 95 station > >> it worked fine but now on the 2000 station it skips 3 labels between each > >> label. > > >> We have tried various drivers, various dip switch configurations and > >> various setups (now using letter, custom design) without success. > >> Depending on what we select it could skip 10 labels but the best so far > >> is 3 labels. > > >> Suggestions, Thanks > > >> Wayne > > > > > Epson Inkjet Printer FAQ: http://welcome.to/epson-inkjet > - > Turn off HTML mail features. Keep quoted material short. Use accurate > subject lines. http://www.leben.com/lists for list instructions. > > - Turn off HTML mail features. Keep quoted material short. Use accurate subject lines. http://www.leben.com/lists for list instructions. </x-charset>