|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
Subject: RE: 1200 Color settings 4 Aug 2001 posted by Ptah Hotep <firstname.lastname@example.org> Ptah, I think this is what you are asking how to do: (I had to do it several weeks ago, so had to look through the manual in order to figure out how to do it.) >From the Epson user manual: 1. Make sure the printer is turned on and not printing. 2. Lower the output try and raise the printer cover. 3. Press the paper load/eject button and hold it down for a few seconds until the print head moves to the left. (printer automatically moves print head back to home position after 60 secs if you donn't continlue with step 4.) 4. Pull up ink cartridge clamp. /Cartridge rises up from holder. 5. Lift cartridge out of printer . 6. Follow steps in previous section, "Installing new cartridge", to install new cartridge. IOW, finish by installing your cartridge as you normally do. HTH, Carol email@example.com - Turn off HTML mail features. Keep quoted material short. Use accurate subject lines. http://www.leben.com/lists for list instructions.
[Photo] [Yosemite News] [Yosemite Photos] [Scanner] [Gimp] [Gimp] Users