Epson Inkjet Discussion Archive November 2000 thru January 2001
[Prev Page][Next Page]
- Re: Please help Ian Lyons!
- From: Bertho Boman <boman@vinland.com>
- Re: VueScan 6.6 Scanning Software
- Re: Please help Ian Lyons!
- From: madeleine.vermaak@pixie.co.za
- Re: Profiler RGB Calibration Chart
- From: "H. Averbach" <haverbach@libcom.com>
- RE: Lube info
- From: "Richard Wolfson" <rwolfson@LyricDesign.com>
- Re: Good replacement for Somerset PE?
- From: Andy Darlow <andy@andydarlow.com>
- RE: Lustre Spray on Matte Paper Heavyweight
- From: metphoto@pacbell.net
- Strange Monitor Color Problems
- From: "CARL GROHS, JR." <CARL_GROHS@compuserve.com>
- Re: more on pigmented inks for the 3000
- From: "Dave King" <kingphoto@mindspring.com>
- Re: more on pigmented inks for the 3000
- From: Andy Darlow <andy@andydarlow.com>
- Re: The Color Of Gray
- From: Bob Tyson <bobicho@earthlink.net>
- Re: 1160 peizo software - what setting for espon HW/archival matte?
- From: Jerry Olson <jerryolson@rrv.net>
- Help:1270-printing size problem
- From: artifex@sublimatrix.com
- RE: Matte Paper Heavyweight vs Archival Matte
- From: "James E. Martz" <jemartz@earthlink.net>
- Why Ilford?
- From: Thomas Harvey <harveyt@aracnet.com>
- Re: FYI: Colorvision Spyder, et al, finally recieved
- From: Bertho Boman <boman@vinland.com>
- South Window Test
- From: Jon Zax <lotus@ionix.net>
- RE: Should I upgrade to PS 6?
- From: "Russell Williams" <williams@Adobe.COM>
- Re: Yahoo, etc. RE: macepson list?
- From: Berry Ives <yvesberia@earthlink.net>
- Mac 870 Driver Settings?
- From: Les Berkley <wogears@fast.net>
- Red River paper -- advice needed
- From: Thomas Harvey <harveyt@aracnet.com>
- Re: New 1270
- From: "Robert Snow" <rssnow@1starnet.com>
- Re: Please help Ian Lyons!
- From: Patrick Brinton <pbrinton@sonic.net>
- Re: the 3000 and archival pigmented inks
- From: Tyler Boley <tyler@tylerboley.com>
- Re: ProfilerRGB 2.07 documentation: questions, feedback
- From: "Software City" <softcity@ezwv.com>
- FYI: Colorvision Spyder, et al, finally recieved
- From: "Michael D. Garrett" <garrettmd@chartertn.net>
- Re: the 3000 and archival pigmented inks
- From: Bob Tyson <bobicho@earthlink.net>
- Re: Epson Stylus Color 600
- From: Les Berkley <wogears@fast.net>
- Re: Quad tone printing idea
- From: "Mark Swinkels" <mark-swinkels@home.com>
- RE: Color Management Question
- From: "Alan Rew" <arew@patrol.i-way.co.uk>
- Re: *Identifying Cart Fatigue*
- From: Dennis <devans@nemonet.com>
- re: Problem with 1200 Printing
- From: "Hull, Mitchell" <MHull@TLNA.COM>
- Re: ProfilerRGB 2.07 documentation: questions, feedback
- From: "Bob Frost" <bob.frost@cwcom.net>
- Re: 3000 Paper Size Mismatch
- From: Dane Nissen <dane1@airmail.net>
- [no subject]
- From: tlbepson@altavista.com
- New 1270
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- RE: Trouble with my first profile
- From: "Alan Rew" <arew@patrol.i-way.co.uk>
- Re: 3000 Paper Size Mismatch
- From: JEL <minerva@itsanet.com>
- RE: 2000P Prints
- From: "Seth Rossman" <seth@srphoto.net>
- Re: more on pigmented inks for the 3000
- From: JEL <minerva@itsanet.com>
- More on Selecting a B&W System
- From: "Howard Averbach" <haverbach@libcom.com>
- 1160 peizo inks: bad head clog problem on black channel...
- From: mike.massee@divatv.com (Mike Massee)
- Profiler RGB Calibration Chart
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- RE: Epson Stylus Color 600
- From: "James H. King" <jimk@dmv.com>
- Re: macepson list?
- From: "Bob Frost" <bob.frost@cwcom.net>
- Re: 2000P Prints
- Re: Lustre Spray on Matte Paper Heavyweight
- Re: Epson 3000 Paper ejects for no apparent reason
- From: Jon Zax <lotus@ionix.net>
- Re: Please help Ian Lyons!
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: mike.massee@divatv.com (Mike Massee)
- RE: Should I upgrade to PS 6?
- From: "Seth Rossman" <seth@srphoto.net>
- RE: VueScan 6.6 Scanning Software
- From: Clark Guy <guy.clark@sbt.siemens.com>
- Lube info
- From: "Seth Rossman" <seth@srphoto.net>
- RE: 2000P Prints
- From: "Seth Rossman" <seth@srphoto.net>
- Re: 2000P Prints
- 1160 peizo software - what setting for espon HW/archival matte?
- From: mike.massee@divatv.com (Mike Massee)
- RE: Matte Paper Heavyweight vs Archival Matte
- From: Phil Rose <pjrose@frontiernet.net>
- RE: Matte Paper Heavyweight vs Archival Matte
- From: Phil and Judy Rose <pjrose@frontiernet.net>
- Re: the 3000 and archival pigmented inks
- From: Sam Taylor <staylor@newmex.com>
- RE: 2000P Prints
- From: "John M. Roper" <jmroper@airmail.net>
- RE: The Color Of Gray
- From: "Seth Rossman" <seth@srphoto.net>
- RE: Should I upgrade to PS 6?
- From: "Seth Rossman" <seth@srphoto.net>
- Re: Joe Kurland: Excessive ink in CMYK profiling
- From: Joe Kurland and Peggy Davis <ganeydn@crocker.com>
- Re: more on pigmented inks for the 3000
- From: "Dave King" <kingphoto@mindspring.com>
- Re: Murray Zaharia: Incorrectly -printing- the Profiler RGB chartat 300 dpi!
- From: "Murray Zaharia" <zaharia@telus.net>
- Good replacement for Somerset PE?
- From: "gary felton" <g.felton@worldnet.att.net>
- Re: Trouble with my first profile
- From: Randy <rlphoto@alltel.net>
- Re: VueScan 6.6 Scanning Software
- From: Randy <rlphoto@alltel.net>
- Re: more on pigmented inks for the 3000
- From: JEL <minerva@itsanet.com>
- Re: Epson Stylus Color 600
- 3000 Paper Size Mismatch
- From: "Robert Behr" <robertbehr@worldnet.att.net>
- Attention Minneapolis/St. Paul
- From: Jack Arnold <jarnold@dashe.com>
- Re: ProfilerRGB 2.07 documentation: questions, feedback
- Re: Epson 3000 dot gain question
- Re: VueScan 6.6 Scanning Software
- From: Roger Smith <rsmith@unb.ca>
- Re: the 3000 and archival pigmented inks
- Re: The Color Of Gray
- Re: The Color Of Gray
- Re: 2000P Prints
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: VueScan 6.6 Scanning Software
- From: "Daniel L. Taylor" <daniel_l_taylor@taylor-design.com>
- Please help Ian Lyons!
- From: madeleine.vermaak@pixie.co.za
- Epson Stylus Color 600
- From: Bezeqint <grod@bezeqint.net>
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: "Brook Acklom" <backlom@bigpond.net.au>
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: "Asael" <Asael@DigitalPhotographicArt.com>
- Re: 3rd gen PGPP - uh oh!
- From: "CARL GROHS, JR." <CARL_GROHS@compuserve.com>
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: "Asael" <Asael@DigitalPhotographicArt.com>
- Re: 3rd gen PGPP - uh oh!
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: the 3000 and archival pigmented inks
- From: Jerry Olson <jerryolson@rrv.net>
- Re:
- From: Douglas H Gregory <dhg5@juno.com>
- Re: Joe Kurland: Excessive ink in CMYK profiling
- From: David Miller <dmiller@cloud9.net>
- Re: Should I upgrade to PS 6?
- From: "Marius E. Johnston" <mariusj@pacbell.net>
- Re: Color Management Question
- From: "Marius E. Johnston" <mariusj@pacbell.net>
- Yahoo, etc. RE: macepson list?
- From: *Judy Seigel <jseigel@post-factory.org>
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: tflash <tflash@earthlink.net>
- Bulk ink durability
- From: "Flo Karp" <flo@fishpie.com>
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: AndyParkPictures@aol.com
- Re: more on pigmented inks for the 3000
- From: Jerry Olson <jerryolson@rrv.net>
- Re: The Color Of Gray
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: tflash <tflash@earthlink.net>
- Re: More on pigmented inks for the 3000
- RE: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: "Barry Kelsall" <bktimes@jps.net>
- Re: Murray Zaharia: Incorrectly -printing- the Profiler RGB chartat 300 dpi!
- From: John Matturri <jmatturr@earthlink.net>
- RE: Should I upgrade to PS 6?
- From: "Cathy Brown" <catbrown@prodigy.net>
- Re: The Color Of Gray
- From: "Charles A. Parker" <Images@vermontel.net>
- Re: 2000P Prints
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: Thomas Bujak <tbujak@kwiknet.net>
- Re: Epson 3000 Paper ejects for no apparent reason
- From: "Michael Alexenko" <alexenko@worldnet.att.net>
- RE: macepson list?
- From: Rick Gordon <rcgordon@linex.com>
- Re: *Identifying Cart Fatigue*
- From: Powell Hargrave <hargravep@home.com>
- Re: VueScan 6.6 Scanning Software
- From: "David" <epsonmaillist@nomorecarts.com>
- RE: B&W Archival Inks question
- From: "007Inspector" <inspector@clis.com>
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: "Brook Acklom" <backlom@bigpond.net.au>
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: "Brook Acklom" <backlom@bigpond.net.au>
- Re: Epson 3000 Paper ejects for no apparent reason
- From: Eddie <eddie@comspec.com>
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: kenweissblum@mindspring.com
- Re: Recovering CD data
- From: Ursula Freer <Art@UrsulaFreer.com>
- Re: The Color Of Gray
- From: Steve Upton <upton@chromix.com>
- Re: the 3000 and archival pigmented inks
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: "William B Chapman" <w5yjb@home.com>
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: mike.massee@divatv.com (Mike Massee)
- RE: Matte Paper Heavyweight vs Archival Matte
- From: "Ian Young" <ian@iay.org.uk>
- Re: Murray Zaharia: Incorrectly -printing- the Profiler RGB chart at 300 dpi!
- From: "Murray Zaharia" <zaharia@telus.net>
- Re: Problem with 1200 Printing
- From: "John and Mary Agria" <agriainc@systec.com>
- Re: ProfilerRGB 2.07 documentation: questions, feedback
- From: "Robert Snow" <rssnow@1starnet.com>
- Re: more on pigmented inks for the 3000
- VueScan 6.6 Scanning Software
- From: "Richard N. Moyer" <dickmoyer@mail.earthlink.net>
- re: more on pigmented inks for the 3000
- From: Tyler Boley <tyler@tylerboley.com>
- Re: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: "Robert Snow" <rssnow@1starnet.com>
- Epson 3000 dot gain question
- From: Joe Kurland and Peggy Davis <ganeydn@crocker.com>
- Epson 3000 Paper ejects for no apparent reason
- From: Joe Kurland and Peggy Davis <ganeydn@crocker.com>
- RE: Recovering CD data
- From: "Ian Young" <ian@iay.org.uk>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: rstare1@hallmark.com
- RE: Trouble with my first profile
- From: Ian Lyons <ilyons@msn.com>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: Phil Rose <pjrose@frontiernet.net>
- Re: *Identifying Cart Fatigue*
- From: Dennis <devans@nemonet.com>
- Re: The Color Of Gray
- From: "Dave King" <kingphoto@mindspring.com>
- Re: the 3000 and archival pigmented inks
- From: Don Manning <images@soltec.net>
- Re: The Color Of Gray
- RE: OFF TOPIC, for E10 owners (Ni-mH Batteries: for Jerry)
- From: Phil Rose <pjrose@frontiernet.net>
- Re: 3rd gen PGPP - uh oh!
- From: "Beverly A. Sampson" <sampsonone@home.com>
- Re: Color Management Question
- From: Stephen Jennings <sgjennin@ix.netcom.com>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: "James E. Martz" <jemartz@earthlink.net>
- Alternative to MIS Quadtones?
- From: "Light and Vision" <light@isn.net>
- B&W Archival Inks question
- From: printlab@printlab.com (Adhemar Dellagiustina Jr.)
- Re: ProfilerRGB 2.07 documentation: questions, feedback
- more on pigmented inks for the 3000
- From: JEL <minerva@itsanet.com>
- Re: Trouble with my first profile
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: Color Management Question
- RE: the 3000 and archival pigmented inks
- From: "Richard Wolfson" <rwolfson@LyricDesign.com>
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: Jerry Olson <jerryolson@rrv.net>
- Re: ProfilerRGB 2.07 documentation: questions, feedback
- From: "Murray Zaharia" <zaharia@telus.net>
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: M‡rio Teixeira <mjteixeira@yahoo.com>
- RE: Recovering CD data
- From: "Hull, Mitchell" <MHull@TLNA.COM>
- Re: Curves for Generations inkset
- From: "Dave King" <kingphoto@mindspring.com>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: Jerry Olson <jerryolson@rrv.net>
- Spectratone inks
- From: Thomas Harvey <harveyt@aracnet.com>
- RE: ProfilerRGB 2.07 documentation: questions, feedback
- From: "Richard Wolfson" <rwolfson@LyricDesign.com>
- Re: The Color Of Gray
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: are Generations inks waterproof?
- From: Harlan Hambright <harlan@crawdadstudio.com>
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: "K2 Chittin" <k2_chittin@hotmail.com>
- Re: OFF TOPIC, for E10 owners (Ni-mH Batteries: for Jerry)
- From: Jerry Olson <jerryolson@rrv.net>
- RE: Matte Paper Heavyweight vs Archival Matte
- From: "Seth Rossman" <seth@srphoto.net>
- RE: reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: "Seth Rossman" <seth@srphoto.net>
- macepson list?
- From: Ursula Freer <Art@UrsulaFreer.com>
- Re: Murray Zaharia: Incorrectly -printing- the Profiler RGB chartat 300 dpi!
- From: David Miller <dmiller@cloud9.net>
- Re: OFF TOPIC, for E10 owners (Ni-mH Batteries: for Jerry)
- From: Jerry Olson <jerryolson@rrv.net>
- Problem with 1200 Printing
- From: "Bob Turner" <bob-turner@lineone.net>
- Re: The Color Of Gray
- From: "Charles A. Parker" <Images@vermontel.net>
- RE: Color Stylus 800
- From: "007Inspector" <inspector@clis.com>
- re: Re: *Identifying Cart Fatigue*
- From: Michael Plack <metphoto@pacbell.net>
- re: Re: *Identifying Cart Fatigue*
- From: Michael Plack <metphoto@pacbell.net>
- re: Re: the 3000 and archival pigmented inks
- From: Michael Plack <metphoto@pacbell.net>
- Re: low-cost monitor
- From: Ed M <em@lasermotion.com>
- re: paper size code
- From: Michael Plack <metphoto@pacbell.net>
- Re: the 3000 and archival pigmented inks
- From: *Judy Seigel <jseigel@post-factory.org>
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: "Brook Acklom" <backlom@bigpond.net.au>
- Re: low-cost monitor
- From: "Brook Acklom" <backlom@bigpond.net.au>
- Re: low-cost monitor
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Questions about Doctor Pro for CMYK profile
- Re: Matte Paper Heavyweight vs Archival Matte
- From: Jerry Olson <jerryolson@rrv.net>
- Re: OT: Monitor woes
- From: Wire Moore <wirem@home.com>
- Re: Color Management Question
- From: Wire Moore <wirem@home.com>
- inkjet film coating composition ?
- From: aseychell@vet.com.au (Adam Seychell)
- reminder: 1270 prints viewable in SF Gallery until Feb 16th
- From: mike.massee@divatv.com (Mike Massee)
- The Color Of Gray
- From: Nick Jahn <nickjahn@uswest.net>
- Re: OFF TOPIC, for E10 owners (Ni-mH Batteries: for Jerry)
- From: Phil Rose <pjrose@frontiernet.net>
- RE: Should I upgrade to PS 6?
- From: "Seth Rossman" <seth@srphoto.net>
- re: the 3000 and archival pigmented inks
- From: Tyler Boley <tyler@tylerboley.com>
- RE: OFF TOPIC, for E10 owners (Ni-mH Batteries: for Jerry)
- From: "Seth Rossman" <seth@srphoto.net>
- Re: Trouble with my first profile
- From: M‡rio Teixeira <mjteixeira@yahoo.com>
- Re: Color Management Question
- 3rd gen PGPP preliminary test results
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: Painter and printer profiles
- Re: Media Type Setting
- From: Bob Meyer <bobm_epson@yahoo.com>
- Suggestion for Semi-Gloss paper
- From: "H. Averbach" <haverbach@libcom.com>
- Re: the 3000 and archival pigmented inks
- From: "Marius E. Johnston" <mariusj@pacbell.net>
- Re: Profiler RGB
- From: "Bob Frost" <bob.frost@cwcom.net>
- RE: Should I upgrade to PS 6?
- From: Denny Harlow <dharlow@apiusa.net>
- Re: the 3000 and archival pigmented inks
- From: JEL <minerva@itsanet.com>
- Re: ProfilerRGB 2.07 documentation: questions, feedback
- From: "Murray Zaharia" <zaharia@telus.net>
- Re: *Identifying Cart Fatigue*
- From: "Ira Beckoff" <imbeck@adelphia.net>
- Re: Monitor woes
- From: "James E. Martz" <jemartz@earthlink.net>
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: M‡rio Teixeira <mjteixeira@yahoo.com>
- Re: B&W color -- Curves for Generations inkset
- From: Berry Ives <yvesberia@earthlink.net>
- Re: *Identifying Cart Fatigue*
- From: "Dave King" <kingphoto@mindspring.com>
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: M‡rio Teixeira <mjteixeira@yahoo.com>
- Re: Color Management Question
- From: "JL" <upcountry@goldrush.com>
- Re: Elton John Collection in Atlanta
- From: Phil Rose <pjrose@frontiernet.net>
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: M‡rio Teixeira <mjteixeira@yahoo.com>
- Re: Curves for Generations inkset
- From: Troy Delnicki <cwphoto@gci.net>
- Re: the 3000 and archival pigmented inks
- Re: Color Stylus 800
- From: Richard Lane <rqlhgl@wt.net>
- RE: Trouble with my first profile
- From: "Alan Rew" <arew@patrol.i-way.co.uk>
- inkjet paper coating composition ?
- From: aseychell@vet.com.au (Adam Seychell)
- Re: the 3000 and archival pigmented inks
- From: "gary felton" <g.felton@worldnet.att.net>
- Re: Should I upgrade to PS 6?
- From: "Sgp" <serge.1@accglobal.net>
- Questions about Doctor Pro for CMYK profile
- From: Joe Kurland and Peggy Davis <ganeydn@crocker.com>
- Re: 3rd gen PGPP - uh oh!
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- 2000P Prints
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Fw: Epson 1270 problems
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: the 3000 and archival pigmented inks
- From: Joe Kurland and Peggy Davis <ganeydn@crocker.com>
- UMAX / PowerColor scanning software
- From: Joe Kurland and Peggy Davis <ganeydn@crocker.com>
- RE: Printer misbehaving
- From: "Bob & Glenna Marin" <rgmarin@home.com>
- Re: Media Type Setting
- From: Jerry Olson <jerryolson@rrv.net>
- Re: are Generations inks waterproof?
- From: Richard Wohlfeiler <rawohlfe@cats.ucsc.edu>
- RE: banding on1270
- From: "John M. Roper" <jmroper@airmail.net>
- Re: Piezo B&W Questions
- From: jimhayes <jimhayes@jymis.com>
- Re: Lumijet Silver/Archival matte
- From: Stephen Jennings <sgjennin@ix.netcom.com>
- Re: banding on1270
- From: Richard Wohlfeiler <rawohlfe@cats.ucsc.edu>
- Re: Paper / Ink Table
- From: Kenneth Childress <icent@best.com>
- Re: are Generations inks waterproof?
- From: Andy Darlow <andy@andydarlow.com>
- the 3000 and archival pigmented inks
- From: JEL <minerva@itsanet.com>
- Re: banding on1270
- From: Andy Darlow <andy@andydarlow.com>
- Should I upgrade to PS 6?
- From: Jack Arnold <jarnold@dashe.com>
- Re: banding on1270
- From: Liz Glasgow <liz@lizglasgow.com>
- Re: the 3000 and archival pigmented inks
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Painter and printer profiles
- From: "D. Grenier" <dgrenier@olywa.net>
- Re: Recovering CD data
- From: Ursula Freer <Art@UrsulaFreer.com>
- Re: OFF TOPIC, for E10 owners (Ni-mH Batteries: for Jerry)
- From: Phil Rose <pjrose@frontiernet.net>
- Re: OT: Monitor woes
- From: Philip Kagan <peoplex@laplaza.org>
- Re: low-cost monitor
- From: Philip Kagan <peoplex@laplaza.org>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: Phil Rose <pjrose@frontiernet.net>
- Re: Media Type Setting
- Re: 7000 and Lysonic Ink's ??
- From: "George Mitchell" <lighthouseair@hotmail.com>
- Re: Recovering CD data
- From: Jeff Lowenthal <photoman2@mindspring.com>
- Re: Re:
- From: "John and Mary Agria" <agriainc@systec.com>
- Re: banding on1270
- From: "John and Mary Agria" <agriainc@systec.com>
- Re: Media Type Setting
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: Painter and printer profiles
- From: Bob Tyson <bobicho@earthlink.net>
- Re: 3rd gen PGPP - uh oh!
- From: Bob Meyer <bobm_epson@yahoo.com>
- Color Stylus 800
- From: "Gutierrez, Diane" <Diane.Gutierrez@westgroup.com>
- Re: are Generations inks waterproof?
- From: Harlan Hambright <harlan@crawdadstudio.com>
- RE: Defective paper from MIS
- From: "Light and Vision" <light@isn.net>
- *Identifying Cart Fatigue*
- From: Michael Plack <metphoto@pacbell.net>
- Re: OFF TOPIC, for E10 owners
- From: Phil Rose <pjrose@frontiernet.net>
- New Subject- Ink on pre-rollers- on Epson 900
- re: epson roll papers -- matt
- From: "Hull, Mitchell" <MHull@TLNA.COM>
- ProfilerRGB 2.07 documentation: questions, feedback
- From: "Software City" <softcity@ezwv.com>
- Re: where to buy printer?
- From: mike.massee@divatv.com (Mike Massee)
- Color Management Question
- From: "Rose M. Epps" <oc.rm.epps@worldnet.att.net>
- RE: Recovering CD data
- From: "Ian Young" <ian@iay.org.uk>
- banding on1270
- From: Liz Glasgow <liz@lizglasgow.com>
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: "K2 Chittin" <k2_chittin@hotmail.com>
- Re: Monitor woes
- From: "K2 Chittin" <k2_chittin@hotmail.com>
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: "K2 Chittin" <k2_chittin@hotmail.com>
- Re: OT: Monitor woes
- From: "K2 Chittin" <k2_chittin@hotmail.com>
- Re: Monitor woes
- From: "K2 Chittin" <k2_chittin@hotmail.com>
- Stylus 400 & 600 ink cartridges
- From: Van Hove Dirk <DIRK.VANHOVE@SD.be>
- Source of Print-Error Critiques?
- From: "Len" <Len@mymail.emcyber.com>
- Re: B&W color -- Curves for Generations inkset
- From: "Dave King" <kingphoto@mindspring.com>
- Re: Reverse adjustments for scanner based profilers
- From: Powell Hargrave <hargravep@home.com>
- Media Type Setting
- From: Lou <lougarden@earthlink.net>
- Re:
- From: Powell Hargrave <hargravep@home.com>
- RE: Trouble with my first profile
- From: Powell Hargrave <hargravep@home.com>
- Re: Profiler RGB - Calibrating in ColorMatch RGB vs. Adobe RGB
- From: tflash <tflash@earthlink.net>
- Re: Borderless PGPP
- From: "John Richmond" <grjr@satx.rr.com>
- Recovering CD data
- Fw: Re:
- From: Douglas H Gregory <dhg5@juno.com>
- Re:
- From: Douglas H Gregory <dhg5@juno.com>
- overheating printers
- From: Brent Roberts <brent@hhrobertsmachinery.com>
- Re: Stylus Color 800
- From: AndyParkPictures@aol.com
- Re: Painter and printer profiles
- Re: Piezo B&W Questions
- Re: Samsung 900NF problem (was Re: Monitor woes)
- From: "Brook Acklom" <backlom@bigpond.net.au>
- Re: Monitor woes
- Re: Fw: Epson 1270 problems
- Samsung 900NF problem (was Re: Monitor woes)
- From: M‡rio Teixeira <mjteixeira@yahoo.com>
- Re: Profiler RGB
- From: JEL <minerva@itsanet.com>
- Re: Best large-format Epson printer
- Re: 3rd gen PGPP - uh oh!
- From: "Ron Rogers" <rcrogers@annapolis.net>
- Re: Painter and printer profiles
- From: Lewis Achen <lachen1@san.rr.com>
- Re: OT: Monitor woes
- From: Andy Darlow <andy@andydarlow.com>
- Re: Reverse adjustments for scanner based profilers
- From: tflash <tflash@earthlink.net>
- Re: Trouble with my first profile
- From: Roger Smith <rsmith@unb.ca>
- Re: Epson Roll Papers -- Matt
- From: Andy Darlow <andy@andydarlow.com>
- RE: Trouble with my first profile
- From: "Alan Rew" <arew@patrol.i-way.co.uk>
- Re: Trouble with my first profile
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re:
- From: Douglas H Gregory <dhg5@juno.com>
- Piezo B&W Questions
- From: "H. Averbach" <haverbach@libcom.com>
- Profiler RGB
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: 3rd gen PGPP - uh oh!
- From: "Robert Snow" <rssnow@1starnet.com>
- Re: Monitor woes
- From: "K2 Chittin" <k2_chittin@hotmail.com>
- Stylus Color 800
- From: "007Inspector" <inspector@clis.com>
- Re: Monitor woes
- From: M‡rio Teixeira <mjteixeira@yahoo.com>
- Monitor woes - how to "align" Hitachi HM-4420R monitor ?
- From: Ed M <em@lasermotion.com>
- Re: are Generations inks waterproof?
- From: Roger Smith <rsmith@unb.ca>
- Profiler RGB - Calibrating in ColorMatch RGB vs. Adobe RGB
- From: "H. Averbach" <haverbach@libcom.com>
- Re: Monitor woes
- From: Steve Grabhorn <sgrabhorn@jps.net>
- Painter and printer profiles
- From: "D. Grenier" <dgrenier@olywa.net>
- Re: where to buy printer?
- From: "Ron Rogers" <rcrogers@annapolis.net>
- re: Unusual printer troubles
- From: Alan Womack <arwbackup@worldnet.att.net>
- re: Paper / Ink Table
- From: Alan Womack <arwbackup@worldnet.att.net>
- Re: Borderless PGPP
- From: Larry Mart <traveler@flash.net>
- RE: Epson Roll Papers -- Matt
- From: "Seth Rossman" <seth@srphoto.net>
- RE: Defective paper from MIS
- From: "Seth Rossman" <seth@srphoto.net>
- Re: Where to buy Epson 1160?
- RE: Monitor woes
- From: "Seth Rossman" <seth@srphoto.net>
- RE: Epson Roll Papers -- Matt
- From: "Matt Hagadorn" <mhagadorn@attglobal.net>
- RE: Prints from 1160
- From: doyleb <doyleb@aztec.lib.utk.edu>
- Re: Epson Roll Papers -- Matt
- From: "Jacques Bellemare" <0955@videotron.ca>
- Re: are Generations inks waterproof?
- From: "lajacobs" <lajacobs@gte.net>
- Re: Monitor woes
- From: Les Berkley <wogears@fast.net>
- Re: where to buy printer?
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Proofing Colors
- [no subject]
- From: "John and Mary Agria" <agriainc@systec.com>
- HELP!!! Vertical lines with Quads and 740
- From: "Light and Vision" <light@isn.net>
- Trouble with my first profile
- From: M‡rio Teixeira <mjteixeira@yahoo.com>
- Re: Where to buy Epson 1160?
- From: Holland StJohn <holland@rattlers.net>
- Re: Monitor woes
- From: "K2 Chittin" <k2_chittin@hotmail.com>
- Defective paper from MIS
- From: "Light and Vision" <light@isn.net>
- Re: Off topic - batteries - Jerry Olson
- From: Randy <rlphoto@alltel.net>
- Re: Monitor woes
- From: "K2 Chittin" <k2_chittin@hotmail.com>
- Re: Paper / Ink Table
- From: tflash <tflash@earthlink.net>
- are Generations inks waterproof?
- From: Richard Wohlfeiler <rawohlfe@cats.ucsc.edu>
- Re: "Borderless" premium glossy?
- Re: Epson Roll Papers -- Matt
- From: Patrick Brinton <pbrinton@sonic.net>
- Re: Monitor woes
- From: "Asa Somers" <asasomers@mindspring.com>
- Re: Reverse adjustments for scanner based profilers
- From: bfraser@amer.net (Bruce Fraser)
- Re: epson 3000 no black?
- From: "Michael Alexenko" <alexenko@worldnet.att.net>
- Re: Elton John Collection in Atlanta
- From: "Barry Stein" <bstein@tntech.edu>
- Re: Monitor woes
- Re: Off topic - batteries - Jerry Olson
- From: Jerry Olson <jerryolson@rrv.net>
- RE: Off topic - batteries - Jerry Olson
- From: "Seth Rossman" <seth@srphoto.net>
- Unusual printer troubles
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Stylus Color 3000 opinions wanted
- From: "Michael Alexenko" <alexenko@worldnet.att.net>
- Re: Lumijet Silver/Archival matte
- From: "Michael Alexenko" <alexenko@worldnet.att.net>
- Re: Where to buy Epson 1160?
- From: Berry Ives <yvesberia@earthlink.net>
- where to buy printer?
- From: "Michael Alexenko" <alexenko@worldnet.att.net>
- RE: low-cost monitor
- From: "Seth Rossman" <seth@srphoto.net>
- Epson 1160 at ubid.com
- From: Thomas Harvey <harveyt@aracnet.com>
- Re: Konica Photo Quality High Glass WAS: 3rd gen PGPP - uh oh!
- From: "Daniel Williams" <dtwilliams3@home.com>
- Reverse adjustments for scanner based profilers
- From: tflash <tflash@earthlink.net>
- Re: Where to buy Epson 1160?
- From: "Daniel Williams" <dtwilliams3@home.com>
- Paper / Ink Table
- From: Kenneth Childress <icent@best.com>
- RE: Prints from 1160
- From: Jon <jake66_94707@yahoo.com>
- Re: Prints from 1160
- From: Jerry Olson <jerryolson@rrv.net>
- Epson Roll Papers -- Matt
- From: postmaster@kafton.com
- Re: "Borderless" premium glossy?
- From: "Daniel Williams" <dtwilliams3@home.com>
- Re: Profilecity profiles
- From: "Tunney Moriarty" <tunney@home.com>
- Re: Where to buy Epson 1160?
- From: "Daniel Williams" <dtwilliams3@home.com>
- Re: Off topic - batteries - Jerry Olson
- From: Kenneth Childress <icent@best.com>
- Re: OFF TOPIC, for E10 owners
- From: Jerry Olson <jerryolson@rrv.net>
- Re: low-cost monitor
- From: Tony Butka <butka@pacbell.net>
- Re: Konica Photo Quality High Glass WAS: 3rd gen PGPP - uh oh!
- From: Holland StJohn <holland@rattlers.net>
- RE: Off topic - batteries - Jerry Olson
- From: "Seth Rossman" <seth@srphoto.net>
- Fw: Epson 1270 problems
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: Monitor woes
- From: "Sgp" <serge.1@accglobal.net>
- Re: Off topic - batteries - Jerry Olson
- "Borderless" premium glossy?
- From: "Russell Williams" <williams@Adobe.COM>
- Re: Where to buy Epson 1160?
- From: Bob Tyson <bobicho@earthlink.net>
- Re: Prints from 1160
- From: "Sgp" <serge.1@accglobal.net>
- Epson 1270 problems
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: 3rd gen PGPP - uh oh!
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: Randy Laskody: Printing RGB via profiles
- From: David Miller <dmiller@cloud9.net>
- Ink Blob Problem
- From: Art Buesing <abuesing@bellatlantic.net>
- Re: missing profile window found
- From: Ian Lyons <ilyons@msn.com>
- Proofing Colors
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: OFF TOPIC, for E10 owners
- From: sbaker <sbaker@netway.com>
- Re: low-cost monitor
- From: M‡rio Teixeira <mjteixeira@yahoo.com>
- Clogged Epson 900 heads and WeInk magenta
- From: Speakoutprod@aol.com
- RE: Prints from 1160
- From: Mitch Valburg <mvalburg@yahoo.com>
- RE: paper size code
- From: "Tim Atherton" <tim@KairosPhoto.com>
- refurbdepot.com security
- From: Berry Ives <yvesberia@earthlink.net>
- RE: Epson boarderless papers
- From: "Jason Fobart" <jason@fobart.net>
- Re: boxes for 8.5x11 paper?
- From: jimhayes <jimhayes@jymis.com>
- Re: missing profile window found(I think)
- From: tflash <tflash@earthlink.net>
- Re: missing profile window found(I think)
- From: Randy <rlphoto@alltel.net>
- Re: Prints from 1160
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Refilling Epson 1200 Cartridges
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Where to buy Epson 1160?
- From: Jerry Olson <jerryolson@rrv.net>
- 1270 Image position/sizing wrong
- prices on the 870 875dc 875 dcs
- From: "tizzy" <tizzy@tmcsi.com>
- Re: Ink Blob Problem
- From: "Software City" <softcity@ezwv.com>
- Re: Refilling Epson 1200 Cartridges
- From: Ken Rubin <kenmozo@loop.com>
- Re: Profilecity profiles
- Re: Off topic - batteries - Jerry Olson
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Longevity of Epson black - was Re[4]: Paint it black
- Re: Premium Glossy on 1270
- OT: Monitor woes
- From: "K2 Chittin" <k2_chittin@hotmail.com>
- RE: Prints from 1160
- From: doyleb <doyleb@aztec.lib.utk.edu>
- re: Konica Photo Quality High Glass WAS: 3rd gen PGPP - uh oh!
- From: Alan Womack <arwbackup@worldnet.att.net>
- Epson boarderless papers
- From: Larry Mart <traveler@flash.net>
- Re: Re[4]: Paint it black
- Re: Where to buy Epson 1160?
- Re: missing profile window found(I think)
- From: JImages2000@aol.com
- Re: Where to buy Epson 1160?
- From: Holland StJohn <holland@rattlers.net>
- paper size code
- From: *Judy Seigel <jseigel@post-factory.org>
- Refilling Epson 1200 Cartridges
- Where to buy Epson 1160?
- From: "Daniel Williams" <dtwilliams3@home.com>
- missing profile window found(I think)
- From: Randy <rlphoto@alltel.net>
- Epson 1270-USB or parallel port
- From: Don Cooper <decoop@the-spa.com>
- Re: Quad tone printing idea
- From: Jon Cone <inkjet@cone-editions.com>
- Re: Profiler RGB colors: something to try
- From: "Dana Trout" <erniepaulson@troutcom.com>
- Re: 3rd gen PGPP - uh oh!
- From: "Daniel Williams" <dtwilliams3@home.com>
- Re: Premium Glossy on 1270
- RE: low-cost monitor
- From: "Richard Wolfson" <rwolfson@LyricDesign.com>
- Off topic - batteries - Jerry Olson
- From: Thomas Bujak <tbujak@kwiknet.net>
- Red River Photo Matte
- From: Leslie Otterbein <lotterbein@look.ca>
- Re: 3rd gen PGPP - uh oh!
- From: "Robert Snow" <rssnow@1starnet.com>
- Re: Linda -- 1160 and RR Ultra Pro Satin #62
- From: "Tom Jr. Garrett" <tgar2@arn.net>
- Re: Linda -- 1160 and RR Ultra Pro Satin #62
- From: "Phillip Feichko" <phil@dtc.carbon.k12.ut.us>
- RE: Prints from 1160
- From: doyleb <doyleb@aztec.lib.utk.edu>
- Re:HAverbach -- 1160 and RR Ultra Pro Satin #62
- From: "lajacobs" <lajacobs@gte.net>
- Re: 3rd gen PGPP - uh oh!
- From: "Richard N. Moyer" <dickmoyer@mail.earthlink.net>
- Re: Stylus Color 3000 opinions wanted
- From: Jerry Olson <jerryolson@rrv.net>
- Re: OFF TOPIC, for E10 owners
- From: Frank DuPont <fdupont@netonecom.net>
- Profilecity profiles
- From: Jack Arnold <jarnold@dashe.com>
- Re: B&W color -- Curves for Generations inkset
- From: William Storm <stormw@aurora.sunyocc.edu>
- Ink Blob Problem
- From: Art Buesing <abuesing@bellatlantic.net>
- Re: Make It So! software
- From: bfraser@amer.net (Bruce Fraser)
- B&W color -- Curves for Generations inkset
- From: "Paul Roark" <proark@silcom.com>
- Re: Premium Glossy on 1270
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: Prints from 1160
- From: Bobbi Doyle-Maher <doyleb@aztec.lib.utk.edu>
- Re: support sheet?
- From: tflash <tflash@earthlink.net>
- Re: Premium Glossy on 1270
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: Stylus Color 3000 opinions wanted
- From: "Marius E. Johnston" <mariusj@pacbell.net>
- Re: Quad tone printing idea
- From: "Dana Trout" <erniepaulson@troutcom.com>
- Re: Best large-format Epson printer
- From: "Rick LaMartina" <rickspix@mwt.net>
- Re: Stylus Color 3000 opinions wanted
- From: Jerry Olson <jerryolson@rrv.net>
- RE: Status window on Epson 3000
- From: "Seth Rossman" <seth@srphoto.net>
- re: Quad tone printing idea
- From: Tyler Boley <tyler@tylerboley.com>
- re: Make It So! software
- From: Tyler Boley <tyler@tylerboley.com>
- Re: Stylus Color 3000 opinions wanted
- From: "Bill Pitcher" <bpitcher@GoldenBCphotography.com>
- RE: OFF TOPIC, for E10 owners (Ni-mH Batteries: for Jerry)
- From: "Seth Rossman" <seth@srphoto.net>
- 3rd gen PGPP - uh oh!
- From: tflash <tflash@earthlink.net>
- Re: Linda -- 1160 and RR Ultra Pro Satin #62
- From: "Howard Averbach" <haverbach@libcom.com>
- Re: Stylus 900 problem
- From: Francis Lepine <francis.biosphere@sympatico.ca>
- Re: Stylus 900 problem
- From: Francis Lepine <francis.biosphere@sympatico.ca>
- RE: support sheet?
- From: "Pollina, Dick" <POLLINRJ@nv.doe.gov>
- Re: Stylus Color 3000 opinions wanted
- From: "Robert Snow" <rssnow@1starnet.com>
- Re: Jan Albrecht: Photocal/Profiler RGB questions
- From: David Miller <dmiller@cloud9.net>
- Re: Is some banding expected on 1160?
- From: Roger Smith <rsmith@unb.ca>
- Re: Quad tone printing idea
- Re: Premium Glossy on 1270
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: Profiler RGB colors: something to try
- Re: Make It So! software
- Re: epson 3000 no black?
- Re: Stylus Color 3000 opinions wanted
- Re: colorvision vrs monacoezcolor
- V2000 #1059/ Monitor/ Inexpensive /other notes
- From: Robert DeCandido <rdcny@earthlink.net>
- Re: epson 3000 no black?
- From: Dane Nissen <dane1@airmail.net>
- RE: epson 3000 banding which driver?
- From: "Remko de Graaff" <r.p.de.graaff@hccnet.nl>
- Re: Stylus Color 3000 opinions wanted
- From: Ursula Freer <Art@UrsulaFreer.com>
- Re: Status window on Epson 3000
- From: "Peter Marquis-Kyle" <petermk@powerup.com.au>
- Re: Lumijet Silver/Archival matte
- From: Andy Darlow <andy@andydarlow.com>
- Is some banding expected on 1160?
- From: "lajacobs" <lajacobs@gte.net>
- Re: Stylus Color 3000 opinions wanted
- From: "Michael Alexenko" <alexenko@worldnet.att.net>
- Re: Stylus Color 3000 opinions wanted
- From: Speakoutprod@aol.com
- Re: OFF TOPIC, for E10 owners (Ni-mH Batteries: for Jerry)
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: Bob Meyer <bobm_epson@yahoo.com>
- colorvision vrs monacoezcolor
- From: tom maierhofer <maierho@attglobal.net>
- support sheet?
- From: Jim LeBay <jlebay@edupoint.com>
- low-cost monitor
- From: "Asa Somers" <asasomers@mindspring.com>
- Re: Cart Modification Idea
- From: Powell Hargrave <hargravep@home.com>
- epson 3000 no black?
- From: Denis Pelli <denis@xp.psych.nyu.edu>
- Re: OFF TOPIC, for E10 owners
- From: Powell Hargrave <hargravep@home.com>
- Re: B&W Archival Prints.
- From: printlab@printlab.com (Adhemar Dellagiustina Jr.)
- Make It So! software
- From: "Murray Zaharia" <zaharia@telus.net>
- Lumijet Silver/Archival matte
- From: Stephen Jennings <sgjennin@ix.netcom.com>
- Stylus 600 printproblem
- From: Van Hove Dirk <DIRK.VANHOVE@SD.be>
- Re: Profiler RGB colors: something to try
- From: "Dana Trout" <erniepaulson@troutcom.com>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: "Patrick Jennings" <patrick@synaptic.bc.ca>
- RE: PS6 convert to profile vs PS6 soft proof
- From: tlbepson@altavista.com
- Re: Prints from 1160
- From: Jerry Olson <jerryolson@rrv.net>
- RE: Status window on Epson 3000
- From: "Seth Rossman" <seth@srphoto.net>
- Re: PaperPhoto vs. Premium glossy photoPaper
- From: "Beverly A. Sampson" <sampsonone@home.com>
- Re: Jerry Olson - Dedicated B&W
- From: Jerry Olson <jerryolson@rrv.net>
- Longevity of Epson black - was Re[4]: Paint it black
- From: Tony Karp <tkarp@tlc-systems.com>
- RE: OFF TOPIC, for E10 owners
- From: "Seth Rossman" <seth@srphoto.net>
- Re: Low-end monitor recommendations needed
- From: "Hull, Mitchell" <MHull@TLNA.COM>
- Re[4]: Paint it black
- From: Tony Karp <tkarp@tlc-systems.com>
- re: Re: OFF TOPIC, for E10 owners
- From: metphoto@pacbell.net
- Re: Stylus Color 3000 opinions wanted
- From: "Marius E. Johnston" <mariusj@pacbell.net>
- Re: Premium Glossy on 1270
- From: "Robert Snow" <rssnow@1starnet.com>
- RE: boxes for 8.5x11 paper?
- From: "Seth Rossman" <seth@srphoto.net>
- Re: Stylus Color 3000 opinions wanted
- From: Jerry Olson <jerryolson@rrv.net>
- Re: boxes for 8.5x11 paper?
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: bfraser@amer.net (Bruce Fraser)
- RE: Why head alignment?
- From: "Seth Rossman" <seth@srphoto.net>
- Re: B&W Archival Prints.
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Contemplating a new purchase, opinions?
- From: tlbepson@altavista.com
- Quad tone printing idea
- From: Mark Swinkels <MarkSw@Attachmate.com>
- Re: Stylus 900 problem
- From: David Rehring <drehring@strydent.com>
- Re: Stylus 900 problem
- From: Les Berkley <wogears@fast.net>
- Re: Best large-format Epson printer
- Re: 870 - screen-frequency ?
- From: mike.massee@divatv.com (Mike Massee)
- Re: Why head alignment?
- From: "Igor Wesdorp" <iwesdorp@chello.nl>
- Re: OFF TOPIC, for E10 owners (Ni-mH Batteries: for Jerry)
- From: Frank Ainsworth <quality.artefacts@dial.pipex.com>
- Premium Glossy on 1270
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: B&W Archival Prints.
- From: "Igor Wesdorp" <iwesdorp@chello.nl>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: mike.massee@divatv.com (Mike Massee)
- Re: 870vs1270 ink cart
- Status window on Epson 3000
- From: "Michel Ditlove" <michel@ditlove.com>
- RE: Stylus Color 3000 opinions wanted
- From: Joe Kurland and Peggy Davis <ganeydn@crocker.com>
- current photocal / profiler rgb versions?
- From: "sirius" <sirius1@casema.net>
- Re: HELP missing profile window
- From: "Sgp" <serge.1@accglobal.net>
- Re: Stylus Color 3000 opinions wanted
- RE: Low-end monitor recommendations needed
- From: "Hull, Mitchell" <MHull@TLNA.COM>
- Prints from 1160
- From: Bobbi Doyle-Maher <doyleb@aztec.lib.utk.edu>
- Re: 870 - screen-frequency ?
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: 870 - screen-frequency ?
- From: "Sam A. McCandless" <samcc@vom.com>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Been off line, need Epson help
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: Mediastreet OEM ink - Warning
- From: "Murray Zaharia" <zaharia@telus.net>
- Re: Contemplating a new purchase, opinions?
- From: Roger Smith <rsmith@unb.ca>
- RE: Profiler RGB & Epson Perfection 1200 & VueScan
- From: "B.Twieg" <btwieg@sonic.net>
- Re: Mac USB to Parallel Epson Cable
- From: Gary Schnabl <badBadger@badBadger.com>
- Re: 870 - screen-frequency ?
- Re: OFF TOPIC, for E10 owners
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Why head alignment?
- From: "Bob Zwarick" <umbra1@qwest.net>
- Re: Mac USB to Parallel Epson Cable
- From: Joe Kurland and Peggy Davis <ganeydn@crocker.com>
- Re: PaperPhoto vs. Premium glossy photoPaper
- From: Bob Meyer <bobm_epson@yahoo.com>
- B&W Archival Prints.
- From: printlab@printlab.com (Adhemar Dellagiustina Jr.)
- Re: 870 - screen-frequency ?
- From: Roger Smith <rsmith@unb.ca>
- Re: Profiler RGB & Epson Perfection 1200 & VueScan
- From: "Software City" <softcity@ezwv.com>
- RE: HELP missing profile window
- From: "B.Twieg" <btwieg@sonic.net>
- RE: Stylus Color 3000 opinions wanted
- From: "Carillon, Bruce" <Carillon@Knews.com>
- Re: Bob Frost: Profiler RGB preview in Photoshop 6
- From: David Miller <dmiller@cloud9.net>
- Re: HELP missing profile window
- Re: Stylus Color 3000 opinions wanted
- Re: Mac USB to Parallel Epson Cable
- From: Harlan Hambright <harlan@crawdadstudio.com>
- Re: epson 3000 banding which driver?
- Mediastreet OEM ink - Warning
- From: "KEMAL DELIC" <deli@swipnet.se>
- 870 - screen-frequency ?
- From: Hugo Šuštar <hugo.sustar@gendir.crosig.hr>
- PaperPhoto vs. Premium glossy photoPaper
- From: "Olivier Berger" <olb@ciger.be>
- Mac USB to Parallel Epson Cable
- From: josh smith <Josh_Smith@compuserve.com>
- HELP missing profile window
- From: Randy <rlphoto@alltel.net>
- Re: Why head alignment?
- From: tflash <tflash@earthlink.net>
- Re: stitching 16-bit images (OT)
- From: digitpl <digitpl@pacbell.net>
- Jerry Olson - Dedicated B&W
- From: "H. Averbach" <haverbach@libcom.com>
- Contemplating a new purchase, opinions?
- From: "Jason Fobart" <jason@fobart.net>
- Re: Low-end monitor recommendations needed
- From: Ursula Freer <Art@UrsulaFreer.com>
- Re: What's the gamut of a flatbed scanner?
- From: "CARL GROHS, JR." <CARL_GROHS@compuserve.com>
- Been off line, need Epson help
- From: RICK KELLY <kelly5463@home.com>
- Re: Profiler RGB & Epson Perfection 1200 & VueScan
- From: Roger Smith <rsmith@unb.ca>
- Re: Matte Paper Heavyweight vs Archival Matte
- From: "sravner" <sravner@optonline.net>
- Re: Stylus Color 3000 opinions wanted
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Need color ink recommendation
- From: Roger Smith <rsmith@unb.ca>
- RE: Matte Paper Heavyweight vs Archival Matte
- From: Andy Darlow <andy@andydarlow.com>
- Re: I need paper!
- From: Andy Darlow <andy@andydarlow.com>
- Re: Cart Modification Idea
- From: "James E. Martz" <jemartz@earthlink.net>
- ink levels/ media selection/printer model
- 140# WC paper in 1160
- Re: Low-end monitor recommendations needed
- From: mike.massee@divatv.com (Mike Massee)
- Re: Profiler RGB & Epson Perfection 1200 & VueScan
- From: JEL <minerva@itsanet.com>
- Re: Hue errors and print fidelity
- From: Bertho Boman <boman@vinland.com>
- Re: Need color ink recommendation
- From: "Murray Zaharia" <zaharia@telus.net>
- Stylus 900 problem
- From: Francis Lepine <francis.biosphere@sympatico.ca>
- Re: Jery Olson -- Dedicated B&W printer
- From: mike.massee@divatv.com (Mike Massee)
- RE: PS6 convert to profile vs PS6 soft proof
- From: "Alan Rew" <arew@patrol.i-way.co.uk>
- Low-end monitor recommendations needed
- From: "Hull, Mitchell" <MHull@TLNA.COM>
- Profiler RGB & Epson Perfection 1200 & VueScan
- From: "Software City" <softcity@ezwv.com>
- Re: Major update to Profiler RGB documentation now available
- From: "Bob Frost" <bob.frost@cwcom.net>
- Re: Re[2]: Paint it black
- RE: Matte Paper Heavyweight vs Archival Matte
- From: "Ian Young" <ian@iay.org.uk>
- RE: Why head alignment?
- From: "Alan Rew" <arew@patrol.i-way.co.uk>
- Re:Hue errors and print fidelity
- From: Roger Smith <rsmith@unb.ca>
- Re: Need color ink recommendation
- From: Roger Smith <rsmith@unb.ca>
- Re: Jery Olson -- Dedicated B&W printer
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Dedicated B&W printer
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Brandin and Roark curves, MIS and Piezo inks
- From: "Igor Wesdorp" <iwesdorp@chello.nl>
- Re: Why head alignment?
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Ilford Glossy and Bronzing, Product ID's
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: Jerry Olson -- Dedicated B&W printer
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Photoshop 5.5 Books
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: Photoshop 5.5 Books
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: 870vs1270 ink cart
- From: "Ron Rogers" <rcrogers@annapolis.net>
- Re: Black thoughts -- was: Paint it black
- From: Jerry Olson <jerryolson@rrv.net>
- Re: Why head alignment?
- From: Sonya <Sonya@ggms.com>
- epson 3000 banding which driver?
- From: "Remko de Graaff" <r.p.de.graaff@hccnet.nl>
- Re: 870vs1270 ink cart
- From: Bob Meyer <bobm_epson@yahoo.com>
- Stylus Color 3000 opinions wanted
- From: "Carillon, Bruce" <Carillon@Knews.com>
- Brandin and Roark curves, MIS and Piezo inks
- From: Thomas Harvey <harveyt@aracnet.com>
- Re: Need color ink recommendation
- Re:Hue errors and print fidelity
- From: Jon Zax <lotus@ionix.net>
- Re: Best large-format Epson printer
- From: "Rick LaMartina" <rickspix@mwt.net>
- Re: Major update to Profiler RGB documentation now available
- Re: Rick Gordon: More CMYK profiling questions
- From: David Miller <dmiller@cloud9.net>
- Re: Joe Kurland: CMYK profiling questions
- From: David Miller <dmiller@cloud9.net>
- Repost: New Profiler RGB Documentation available
- From: David Miller <dmiller@cloud9.net>
- Re: Why head alignment?
- From: "julianthomas.terra.es" <julianthomas@terra.es>
- Re: Profiler Pro [was: Will Doctor Pro cure sick profiles?]
- profiles for MIS Archival inks
- From: MDDesignworks <info@mddesignworks.com>
- Re: Profiling forprepress on the 3000
- Re: I need paper!
- From: William Storm <stormw@aurora.sunyocc.edu>
- Re: Profiling for largest gamut on the 3000
- Why head alignment?
- From: "Igor Wesdorp" <iwesdorp@chello.nl>
- Re: Dedicated B&W printer
- From: "Igor Wesdorp" <iwesdorp@chello.nl>
- Remnant 1160
- From: "Len" <Len@mymail.emcyber.com>
- I need paper!
- From: "cc" <ccrutcher@home.com>
- Re: 870vs1270 ink cart
- From: "John Richmond" <grjr@satx.rr.com>
- Re: Jery Olson -- Dedicated B&W printer
- From: "Igor Wesdorp" <iwesdorp@chello.nl>
- Re: Ilford and 1270
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: Will Doctor Pro cure sick profiles?
- From: "Robert Snow" <rssnow@1starnet.com>
- Need color ink recommendation
- From: Thomas Harvey <harveyt@aracnet.com>
- Re: Photoshop 5.5 Books
- From: Lewis Achen <lachen1@san.rr.com>
- Re: Ilford and 1270
- From: Bob Meyer <bobm_epson@yahoo.com>
- Re: Jerry Olson -- Dedicated B&W printer
- From: "H. Averbach" <haverbach@libcom.com>
- Re: Ilford Glossy and Bronzing, Product ID's
- From: Bob Meyer <bobm_epson@yahoo.com>
- 870vs1270 ink cart
- From: "Phillip Feichko" <phil@dtc.carbon.k12.ut.us>
- Re: Jery Olson -- Dedicated B&W printer
- From: mike.massee@divatv.com (Mike Massee)
- Re: Profiling for largest gamut on the 3000
- Re: epson 2000p ink usage
- Re: Black thoughts -- was: Paint it black
- From: Patrick Brinton <pbrinton@sonic.net>
- Subject: Re: 1270-ink spots on prints
- From: "O. Bisogno Scotti" <mcscotti@wgn.net>
- Re: 1270/2000 costs per sheet?
- Re: Real World Profiling - Ez Color V1.6
- From: "Dana Trout" <erniepaulson@troutcom.com>
- Re: Print Guard by Lyson
- Re: Ilford Glossy and Bronzing, Product ID's
- From: "Ron Ostrow" <rostrow@flash.net>
- Re: Will Doctor Pro cure sick profiles?
- From: "Ron Ostrow" <rostrow@flash.net>
- Re: Best large-format Epson printer
- From: "Ira Beckoff" <imbeck@adelphia.net>
- Re: 1270/2000 costs per sheet?
- RE: Best large-format Epson printer
- From: Andy Darlow <andy@andydarlow.com>
- Re: Cart Modification Idea
- From: Colin Bowness <cbowness@mediaone.net>
- PS6 convert to profile vs PS6 soft proof
- From: tlbepson@altavista.com
- Re: Photoshop 5.5 Books
- From: William George <wgeorge@exp.net>
- RE: Epson 1270 or 2000P?
- From: "Cathy Brown" <catbrown@prodigy.net>
- Re: Profiler Pro [was: Will Doctor Pro cure sick profiles?]
- From: "Robert Snow" <rssnow@1starnet.com>
- Major update to Profiler RGB documentation now available
- From: David Miller <dmiller@cloud9.net>
- Ilford and 1270
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: Monaco EZ color
- From: Troy <cwphoto@gci.net>
- Re: Best large-format Epson printer
- From: Eddie <eddie@comspec.com>
- OT: Canon Powershot S-100 (Elph) vs Olympus D-490 Z
- From: "Donald E. Stowe" <destowe@pipeline.com>
- Red River Premium High Gloss
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Profiling for largest gamut on the 3000
- From: Joe Kurland and Peggy Davis <ganeydn@crocker.com>
- RE: Multiple printers - where do you put them?
- From: "Seth Rossman" <seth@srphoto.net>
- Re: Dedicated B&W printer
- From: "Howard Averbach" <haverbach@libcom.com>
- RE: True Blacks
- From: "Seth Rossman" <seth@srphoto.net>
- RE: non-standard handling of EK films
- From: "Seth Rossman" <seth@srphoto.net>
- Re: Real World Profiling - Ez Color V1.6
- From: "Software City" <softcity@ezwv.com>
- Ilford and 1270
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: B&W Printer
- From: "Sam A. McCandless" <samcc@vom.com>
- Re: Ilford Glossy and Bronzing, Product ID's
- From: "Donald A Schiemann" <DSCHIEMANN@prodigy.net>
- Re: Best large-format Epson printer
- From: "Sam A. McCandless" <samcc@vom.com>
- Re: Ilford Glossy and Bronzing, Product ID's
- From: Bailey Donnally <donnally@hermes.lfc.edu>
- Re: Hue errors and print fidelity
- From: "Richard N. Moyer" <dickmoyer@mail.earthlink.net>
- RE: 1270/2000 costs per sheet?
- From: JimD <rasterdogs@home.com>
- Black thoughts -- was: Paint it black
- From: Tony Karp <tkarp@tlc-systems.com>
- Re: Cart Modification Idea
- From: Holland StJohn <holland@rattlers.net>
- Re: Monaco ez color
- From: Bertho Boman <boman@vinland.com>
- Re: Bulk Dye Ink
- From: Holland StJohn <holland@rattlers.net>
- Re: Ilford Glossy and Bronzing, Product ID's
- From: "JL" <upcountry@goldrush.com>
- Profiler Pro [was: Will Doctor Pro cure sick profiles?]
- From: "Richard Wolfson" <rwolfson@LyricDesign.com>
- Re: 2000P and New PGPP
- From: Dennis <devans@nemonet.com>
- RE: Best large-format Epson printer
- From: "Carillon, Bruce" <Carillon@Knews.com>
[Photo Home]
[Scanner]
[Yosemite]
