| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] |
Tomcat: Ok, I'll try refilling ONE more time, if you will tell me step by step Precisely how to refill a black 1200 Cartridge. I'll tell you exactly what I did, and you tell me what I did wrong. I followed media street's directions exactly. What went wrong, because I got disastrous results. Here's what I did. Filled my syringe with beta black Generations inks. Got out a virgin Media street cartridge. Removed the vacuum seal first, so the vent hole was exposed. I placed the needle to the bottom front of the cartridge like instructed, and then SLOWLY filled the cartridge through the fill hole. Waited until a tiny bit of ink came up through the fill hole, AND the vent hole. Wiped off the excess and placed the little rubber plug in the fill hole. Placed the label over the top, leaving the vent hole still exposed to air. Placed cartridge in printer. Experienced huge white areas and black streaks that looked like you had dragged a small rake over the print. What did I do wrong? What should I have done different? Jerry - Turn off HTML mail features. Keep quoted material short. Use accurate subject lines. http://www.leben.com/lists for list instructions.
[Photo] [Yosemite News] [Yosemite Photos] [Scanner] [Gimp] [Gimp] Users
|