|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
William Burke wrote: > > ----- Original Message ----- > From: Michael Greer <firstname.lastname@example.org> > To: <email@example.com> > Sent: Saturday, July 03, 1999 9:22 AM > Subject: Re: Maxim/Ultra print coatings > > > > > > > J. Arthur Davis wrote: > > > > > Mike > > > If you go the Super Shot route you must also purchase the air > > > compressor. > > > > As long as your local service station doesn't have a high pressure cut > valve on their > > pump, you should be able to charge it there without the extra expense of > buying a > > compressor. > > > > -- > > Mike Greer > > In reference to the Optima super shot 'atomizer' used with the Maxim XE top > coat which is recharged with compressed air, I wonder if the moisture > (water) from > air hoses at the local tire store has an effect on the coating liquid in the > 'atomizer'. > > Bill Burke > > - > Please: Stay on topic. Trim quoted messages. > http://www.leben.com/lists for list instructions. Very good question! Jim Davis www.visual-artists.com/paper - Please: Stay on topic. Trim quoted messages. http://www.leben.com/lists for list instructions.
[Photo] [Yosemite News] [Yosemite Photos] [Scanner] [Gimp] [Gimp] Users