Re: ultrastable canvas and the 3000

["John Lorusso" <jlorusso@parrotcolor.com>]

Michael
The ultrastable canvas is too thick to consistantly feed in the 3000. f you
wre able to feed the Ultrastabel, I expect you will see tractor feed roller
marks on th ecanvas. I suggest you try Parrot 8oz matte or gloss canvas
which has ben optimized for operation on the Epson 3000. We also offer the
Lysonic E inks.
John.
Parrot Digigraphic Ltd
630 Boston Road
Billerica, MA 01821
Tel: 978 670 9977
Fax: 978 670 7744
E-Mail: jlorusso@parrotcolor.com
"Dedicated to fine art printmaking"
-----Original Message-----
From: Michael Alexenko <alexenko@worldnet.att.net>
To: epson-inkjet@leben.com <epson-inkjet@leben.com>
Date: Saturday, March 20, 1999 7:58 PM
Subject: ultrastable canvas and the 3000


>Hello,
>
>I just recently purchased some of the ultrastable canvas to use in my 3000,
>and my first attempt to use it has met with less than success.....
>basically, I had a jam, and the image printed on the first inch or so
>(leaving a nice mess).
>
>Does anyone have suggestions on how to load this material properly, and if
>there's any suggested settings, both on the 3000 console, and in the
driver?
>
>Thanks!
>
>Michael Alexenko
>http://www.creative-imagery.com
>
>
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>Please do your part: Stay on topic. Trim quoted messages.
>http://www.leben.com/lists for instructions on using this list.
>

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Please do your part: Stay on topic. Trim quoted messages.
http://www.leben.com/lists for instructions on using this list.