|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
Take the USB out altogether and delete the software. Then re-boot from cold i.e. turn the beastly machine off and then on. If it "sees" the USB port and you re-install the driver I'll bet it will work ok. ----- Original Message ----- From: "george kase" <email@example.com> To: <firstname.lastname@example.org> Sent: Wednesday, June 12, 2002 7:04 PM Subject: 1160 incomplete printing??? > Hi all, > I just hooked up my new (to me) 1160 to my Mac 8500 and > attempted to print and for the first few prints out of the > box, everything worked fine...I have a USB adapter card in my > 8500. However, a few days later when I sat down to do some > serious printing...it only would print like 15% of the image > and then eject the page and flash up an error message on the order > of "the communications link is goofed up and I should restart the > printer".,.. of course, following this advice has done no good. > Epson suggested a newer system software so I upgraded to 9.1 (from 9.0.4) > and now it won't print at all...any suggestions? > thanks > George Kase > Chicago > > > - > Turn off HTML mail features. Keep quoted material short. Use accurate > subject lines. http://www.leben.com/lists for list instructions. > - Turn off HTML mail features. Keep quoted material short. Use accurate subject lines. http://www.leben.com/lists for list instructions.