|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
That would make sense to me, especially for scanners. Making smaller CCD elements is a big deal; making a stepper motor move in finer increments isn't. -- Ciao, Paul D. DeRocco Paul mailto:email@example.com > From: Laurie Solomon > > It could be that I have it backwards; but that is not my > understanding. My > understanding is that the higher number in both the case of scanners and > printers reflects the long edge of the media and typically is a > multiple of > the lower number for the short edge that is a result fo the stepper motor > which either puches the paper thru the device in steps or runs the scanner > sensors or printhead down the media. - Turn off HTML mail features. Keep quoted material short. Use accurate subject lines. http://www.leben.com/lists for list instructions.