I think you need a "header" plug or connector. You should be able to attach it to the LED leads without soldering or even stripping insulation. Take a jumper block with the right hole spacing along. Good luck. Bruce Roorda Possum Hill Farm ----- Original Message ----- From: "Alan Womack" <arwbackup@worldnet.att.net> To: "Alan Womack" <epson-inkjet@leben.com> Sent: Tuesday, March 19, 2002 17:27 Subject: re[2]: OT: Remote LED cables for HD > Yes, their LEDS are fine. However connecting them to the pins on the jumper > blocks is no trivial task, hence the desire for premade units. I had tried > removing the jumper from a shorting jumper, solding cable leads on each side, > but the jumper pins don't engage reliable or with enough distance. > > Alan > > >> Radio Shack has leds. For the most part, leds are leds. But you'll > >> have to do you own extension cabling. > - > Turn off HTML mail features. Keep quoted material short. Use accurate > subject lines. http://www.leben.com/lists for list instructions. > - Turn off HTML mail features. Keep quoted material short. Use accurate subject lines. http://www.leben.com/lists for list instructions.