Re: Clogs, air leaks, and videotape

[Powell Hargrave <hargravep@shaw.ca>]

>| If the cup seals become stretched from movement it is easy to replace
>them.
>|  If you have an empty not too used cartridge, peal/scrape the tape off the
>| bottom of the ink ports and the cup seals will pop out easily.  Wash any
>| old ink off of these and install them into your CIS cartridge.  MIS used
>to
>| sell new cup seals but I can't find them on their site now.
>>>>>>>


>The seal must be glued to the cartridge or is it enough to put it  in contac
>tbetween the cartridge and the head connection?


It just pops in.  A ridge on the seal fits into a groove in the cartridge.



Powell Hargrave           Nanaimo  B.C.  Canada
Digital Photo Page:  http://members.shaw.ca/hargravep 

    Epson FAQ Site:  http://home.att.net/~arwomack01/
Epson List Archive:  http://groups.yahoo.com/group/epson-inkjet/



-
Turn off HTML mail features. Keep quoted material short. Use accurate
subject lines. http://www.leben.com/lists for list instructions.