Need help for RedBoot Application

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]




I have ported RedBoot to board LPC2468 and it run good. Then, I build
an Ecos Application (.srec file) and load it into board, but when the
application run, it display the temp value (??)
I use these command:
- Load Application into board: Redboot>    load -v -m yMODEM 0xa000000
- Run Application:                  Redboot>    go 0xa000000
but it display value like that: &lADisl&^_)llaf
I don't know why it not run correctly? Can you help me, please!
Thanks you

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



[Linux Embedded]     [U-Boot V2]     [Linux Kernel]     [Linux MIPS]     [Linux ARM]     [Linux for the Blind]     [Linux Resources]     [Photo]     [Yosemite]     [ISDN Cause Codes]     [ECOS Home]

Add to Google Powered by Linux