Re: eCos Test programs serial output format?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]




2011/3/30 Richard Rauch <rrauch@xxxxxxxxxx>:
> Hi All,
>
> When running tests like tm-basic, there are log outputs to serial interface.
> Is this pure ASCII? Or do I need on host side a terminal emulation or
> something special? (e.g. when using Hyperterminal)


Hi,
You need to set CYGSEM_HAL_DIAG_MANGLER to "GDB" if you want to see
log in the gdb output window.
In this case output messages will be converted into a gdb format.

If you don't use gdb stub, set CYGSEM_HAL_DIAG_MANGLER to "None" and
CYGDBG_HAL_DIAG_TO_DEBUG_CHAN to "true".
In this case messages will be passed in raw ASCII.

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



[Linux Embedded]     [U-Boot V2]     [Linux Kernel]     [Linux MIPS]     [Linux ARM]     [Linux for the Blind]     [Linux Resources]     [Photo]     [Yosemite]     [ISDN Cause Codes]     [ECOS Home]

Add to Google Powered by Linux