Re: obsolete tuner i2c address.

["Michael Krufky" <mkrufky@xxxxxxxxxxx>]

David,

On Wed, Dec 31, 2008 at 4:53 AM, David Dewson <ddewson@xxxxxxxxx> wrote:
> dmesg output
> [   14.201119] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff
> [   14.244601] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
> [   14.257146] saa7133[0]: i2c scan: found device @ 0xd0  [???]
> [   14.332066] tuner' 0-0068: chip found @ 0xd0 (saa7133[0])
> [   14.519345] xc2028 0-0068: creating new instance
> [   14.519351] xc2028 0-0068: type set to XCeive xc2028/xc3028 tuner
> [   14.519356] tuner' 0-0068: ====================== WARNING!
> ======================
> [   14.519360] tuner' 0-0068: Support for tuners in i2c address range 0x64
> thru 0x6f
> [   14.519364] tuner' 0-0068: will soon be dropped. This message indicates
> that your
> [   14.519368] tuner' 0-0068: hardware has a Xceive XC3028 tuner at i2c
> address 0x68.
> [   14.519372] tuner' 0-0068: To ensure continued support for your device,
> please
> [   14.519377] tuner' 0-0068: send a copy of this message, along with full
> dmesg
> [   14.519380] tuner' 0-0068: output to v4l-dvb-maintainer@xxxxxxxxxxx
> [   14.519384] tuner' 0-0068: Please use subject line: "obsolete tuner i2c
> address."
> [   14.519389] tuner' 0-0068: driver: saa7133[0], addr: 0x68, type: 71
> (Xceive XC3028)
> [   14.519393] tuner' 0-0068: ====================== WARNING!
> ======================
> [   14.519416] firmware: requesting xc3028-v27.fw
> [   15.925274] xc2028 0-0068: Error: firmware xc3028-v27.fw not found.
> [   15.925292] firmware: requesting xc3028-v27.fw
> [   15.930039] xc2028 0-0068: Error: firmware xc3028-v27.fw not found.
> [   15.939499] saa7133[0]: registered device video0 [v4l2]
> [   15.939603] saa7133[0]: registered device vbi0
> [   15.939803] saa7133[0]: registered device radio0
[snip]
> [  199.257541] firmware: requesting xc3028-v27.fw
> [  199.263810] xc2028 0-0068: Error: firmware xc3028-v27.fw not found.
[snip]
> [  279.864215] firmware: requesting xc3028-v27.fw
> [  279.867090] xc2028 0-0068: Error: firmware xc3028-v27.fw not found.


Thank you for your report.

Unfortunately, we can't be sure that you actually have an xc3028 at
i2c address 0x68 unless you install the firmware and can use the tuner
correctly.

Could you please try to install the xc3028-v27.fw image and test again?

Thanks,

Mike

_______________________________________________
v4l-dvb-maintainer mailing list
v4l-dvb-maintainer@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/v4l-dvb-maintainer