[PULL] http://linuxtv.org/hg/~mrechberger/v4l-dvb-saa7134-m102

[mrechberger at gmail.com (Markus Rechberger)]

On 2/19/07, Hartmut Hackmann <hartmut.hackmann@xxxxxxxxxxx> wrote:
>
>
> Markus Rechberger schrieb:
> > Hi,
> >
> >
> > On 2/17/07, Hartmut Hackmann <hartmut.hackmann@xxxxxxxxxxx> wrote:
> >> Hi, Markus
> >>
> >> Markus Rechberger schrieb:
> >> > Mauro, please pull the avermedia m102 update:
> >> > http://linuxtv.org/hg/~mrechberger/v4l-dvb-saa7134-m102
> >> >
> >> > cheers,
> >> > Markus
> >> >
> >> I had a look at the code and i think its a bit strange:
> >> - Cards based on saa7131/22/35 and the tda8290 / tda8275(a)
> >>   normally use the tda8275 for FM radio. In this case, .amux
> >>   needs to be "TV" (and typically GPIO21=1)
> >>   Does the radio work?
> >> - The "audio" gpio operations use the gpiomask from the card
> >>   definition. so a .gpio=1 or a .gpio=2 won't go anywhere.
> >>
> >> - In saa7134_board_init1
> >>   Does the board really need so many GPIOs in output mode?
> >>
> >
> > these values were taken from regspy.
> >
> >> Can you please check this?
> >
> > I removed the radio and gpio entries from the repository since that
> > device doesn't really support radio
> >
> > Markus
> >
> Aha. Thank you for the clarification.
> Mauro hasn't pulled yet, may i "steal" the code from you? It conflicts
> with changes i made, so i need to merge manually anyway.
>
> Is that ok for both of you?
>

sure

Markus