Re: kernel 3.4.0 oops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]




On Tue, 2012-05-22 at 12:57 +0200, Daniel Vetter wrote:

> Ok, I've tried to reproduce this on my ilk here but couldn't hit the
> issue. A few things:
> - Your gpu dies. Please dig out the versions of mesa, libdrm and
>   xf86-video-intel you're using.
> - Is this a regression?
> - Do you see any other bad side-effects of this besides the WARN in dmesg?
> - Also, can you please enable printk timestamps with CONFIG_PRINTK_TIME
>   and grab a new dmesg? The relative timings of the things going on would
>   be very interesting.
> 
> Thanks, Daniel

This oops is only on xen dom0. This is the first time I try xen.
xf86-video-intel-2.17.0-r3
mesa-7.11.2
libdrm-2.4.27

c00fff] could not be reserved
[    2.993645] system 00:01: Plug and Play ACPI device, IDs PNP0c02
(active)
[    2.993720] pnp 00:02: [io  0x0000-0x001f]
[    2.993722] pnp 00:02: [io  0x0081-0x0091]
[    2.993723] pnp 00:02: [io  0x0093-0x009f]
[    2.993725] pnp 00:02: [io  0x00c0-0x00df]
[    2.993726] pnp 00:02: [dma 4]
[    2.993754] pnp 00:02: Plug and Play ACPI device, IDs PNP0200
(active)
[    2.993760] pnp 00:03: [mem 0xff000000-0xffffffff]
[    2.993785] pnp 00:03: Plug and Play ACPI device, IDs INT0800
(active)
[    2.993869] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    2.993906] pnp 00:04: Plug and Play ACPI device, IDs PNP0103
(active)
[    2.993917] pnp 00:05: [io  0x00f0]
[    2.993921] xen: registering gsi 13 triggering 1 polarity 0
[    2.993927] xen_map_pirq_gsi: returning irq 13 for gsi 13
[    2.993929] xen: --> pirq=13 -> irq=13 (gsi=13)
[    2.993937] pnp 00:05: [irq 13]
[    2.993966] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04
(active)
[    2.993976] pnp 00:06: [io  0x002e-0x002f]
[    2.993978] pnp 00:06: [io  0x004e-0x004f]
[    2.993979] pnp 00:06: [io  0x0061]
[    2.993980] pnp 00:06: [io  0x0063]
[    2.993982] pnp 00:06: [io  0x0065]
[    2.993983] pnp 00:06: [io  0x0067]
[    2.993984] pnp 00:06: [io  0x0070]
[    2.993986] pnp 00:06: [io  0x0080]
[    2.993987] pnp 00:06: [io  0x0092]
[    2.993988] pnp 00:06: [io  0x00b2-0x00b3]
[    2.993990] pnp 00:06: [io  0x0200-0x027f]
[    2.993991] pnp 00:06: [io  0x1000-0x100f]
[    2.993993] pnp 00:06: [io  0xffff]
[    2.993994] pnp 00:06: [io  0xffff]
[    2.993995] pnp 00:06: [io  0x0400-0x047f]
[    2.993997] pnp 00:06: [io  0x0500-0x057f]
[    2.993998] pnp 00:06: [io  0xef80-0xef9f]
[    2.994057] system 00:06: [io  0x0200-0x027f] has been reserved
[    2.994060] system 00:06: [io  0x1000-0x100f] has been reserved
[    2.994062] system 00:06: [io  0xffff] has been reserved
[    2.994064] system 00:06: [io  0xffff] has been reserved
[    2.994066] system 00:06: [io  0x0400-0x047f] has been reserved
[    2.994068] system 00:06: [io  0x0500-0x057f] has been reserved
[    2.994070] system 00:06: [io  0xef80-0xef9f] has been reserved
[    2.994073] system 00:06: Plug and Play ACPI device, IDs PNP0c02
(active)
[    2.994082] pnp 00:07: [io  0x0070-0x0077]
[    2.994084] xen: registering gsi 8 triggering 1 polarity 0
[    2.994086] xen_map_pirq_gsi: returning irq 8 for gsi 8
[    2.994088] xen: --> pirq=8 -> irq=8 (gsi=8)
[    2.994092] pnp 00:07: [irq 8]
[    2.994121] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00
(active)
[    2.994130] pnp 00:08: [io  0x0060]
[    2.994131] pnp 00:08: [io  0x0064]
[    2.994132] xen: registering gsi 1 triggering 1 polarity 0
[    2.994134] xen_map_pirq_gsi: returning irq 1 for gsi 1
[    2.994136] xen: --> pirq=1 -> irq=1 (gsi=1)
[    2.994140] pnp 00:08: [irq 1]
[    2.994169] pnp 00:08: Plug and Play ACPI device, IDs PNP0303
(active)
[    2.994176] xen: registering gsi 12 triggering 1 polarity 0
[    2.994178] xen_map_pirq_gsi: returning irq 12 for gsi 12
[    2.994180] xen: --> pirq=12 -> irq=12 (gsi=12)
[    2.994184] pnp 00:09: [irq 12]
[    2.994215] pnp 00:09: Plug and Play ACPI device, IDs SYN0168 SYN0100
SYN0002 PNP0f13 (active)
[    2.994406] xen: registering gsi 23 triggering 1 polarity 0
[    2.994417] xen: --> pirq=23 -> irq=23 (gsi=23)
[    2.994421] pnp 00:0a: [irq 23]
[    2.994460] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004
(active)
[    2.994584] pnp 00:0b: [bus ff]
[    2.994628] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03
(active)
[    2.994708] pnp: PnP ACPI: found 12 devices
[    2.994710] ACPI: ACPI bus type pnp unregistered
[    3.000822] PM-Timer failed consistency check  (0x0xffffff) -
aborting.
[    3.000832] pci 0000:44:00.0: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
[    3.000873] pci 0000:00:1c.1: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 02-42] add_size 200000
[    3.000924] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit
pref] get_res_add_size add_size 200000
[    3.000929] pci 0000:00:1c.1: BAR 9: assigned [mem
0xd4b00000-0xd4cfffff 64bit pref]
[    3.000932] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    3.000942] pci 0000:00:1c.0:   bridge window [mem
0xd4800000-0xd48fffff]
[    3.000959] pci 0000:00:1c.1: PCI bridge to [bus 02-42]
[    3.000963] pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
[    3.000972] pci 0000:00:1c.1:   bridge window [mem
0xd0800000-0xd47fffff]
[    3.000979] pci 0000:00:1c.1:   bridge window [mem
0xd4b00000-0xd4cfffff 64bit pref]
[    3.000991] pci 0000:00:1c.3: PCI bridge to [bus 43-43]
[    3.001000] pci 0000:00:1c.3:   bridge window [mem
0xd0700000-0xd07fffff]
[    3.001023] pci 0000:44:00.0: BAR 6: assigned [mem
0xd0420000-0xd043ffff pref]
[    3.001025] pci 0000:00:1c.5: PCI bridge to [bus 44-44]
[    3.001029] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    3.001038] pci 0000:00:1c.5:   bridge window [mem
0xd0600000-0xd06fffff]
[    3.001045] pci 0000:00:1c.5:   bridge window [mem
0xd0400000-0xd04fffff 64bit pref]
[    3.001057] pci 0000:00:1e.0: PCI bridge to [bus 45-45]
[    3.001066] pci 0000:00:1e.0:   bridge window [mem
0xd0500000-0xd05fffff]
[    3.001093] xen: registering gsi 17 triggering 0 polarity 1
[    3.001100] xen: --> pirq=17 -> irq=17 (gsi=17)
[    3.001112] xen: registering gsi 16 triggering 0 polarity 1
[    3.001116] xen: --> pirq=16 -> irq=16 (gsi=16)
[    3.001127] xen: registering gsi 19 triggering 0 polarity 1
[    3.001131] xen: --> pirq=19 -> irq=19 (gsi=19)
[    3.001142] xen: registering gsi 16 triggering 0 polarity 1
[    3.001144] xen_map_pirq_gsi: returning irq 16 for gsi 16
[    3.001145] xen: --> pirq=16 -> irq=16 (gsi=16)
[    3.001147] Already setup the GSI :16
[    3.001159] pci 0000:00:1e.0: setting latency timer to 64
[    3.001164] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    3.001165] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    3.001167] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    3.001169] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
[    3.001171] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[    3.001173] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[    3.001175] pci_bus 0000:01: resource 1 [mem 0xd4800000-0xd48fffff]
[    3.001177] pci_bus 0000:02: resource 0 [io  0x3000-0x4fff]
[    3.001178] pci_bus 0000:02: resource 1 [mem 0xd0800000-0xd47fffff]
[    3.001180] pci_bus 0000:02: resource 2 [mem 0xd4b00000-0xd4cfffff
64bit pref]
[    3.001182] pci_bus 0000:43: resource 1 [mem 0xd0700000-0xd07fffff]
[    3.001184] pci_bus 0000:44: resource 0 [io  0x2000-0x2fff]
[    3.001186] pci_bus 0000:44: resource 1 [mem 0xd0600000-0xd06fffff]
[    3.001188] pci_bus 0000:44: resource 2 [mem 0xd0400000-0xd04fffff
64bit pref]
[    3.001190] pci_bus 0000:45: resource 1 [mem 0xd0500000-0xd05fffff]
[    3.001192] pci_bus 0000:45: resource 4 [io  0x0000-0x0cf7]
[    3.001194] pci_bus 0000:45: resource 5 [io  0x0d00-0xffff]
[    3.001195] pci_bus 0000:45: resource 6 [mem 0x000a0000-0x000bffff]
[    3.001197] pci_bus 0000:45: resource 7 [mem 0xc0000000-0xdfffffff]
[    3.001199] pci_bus 0000:45: resource 8 [mem 0xf0000000-0xfedfffff]
[    3.001201] pci_bus 0000:45: resource 9 [mem 0xfee01000-0xffffffff]
[    3.001234] NET: Registered protocol family 2
[    3.001286] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
[    3.001693] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[    3.002530] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[    3.002742] TCP: Hash tables configured (established 262144 bind
65536)
[    3.002745] TCP: reno registered
[    3.002748] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    3.002776] UDP-Lite hash table entries: 4096 (order: 5, 131072
bytes)
[    3.002880] NET: Registered protocol family 1
[    3.003045] RPC: Registered named UNIX socket transport module.
[    3.003048] RPC: Registered udp transport module.
[    3.003050] RPC: Registered tcp transport module.
[    3.003065] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.003085] pci 0000:00:02.0: Boot video device
[    3.003107] xen: registering gsi 16 triggering 0 polarity 1
[    3.003115] xen_map_pirq_gsi: returning irq 16 for gsi 16
[    3.003116] xen: --> pirq=16 -> irq=16 (gsi=16)
[    3.003119] Already setup the GSI :16
[    3.003205] xen: registering gsi 20 triggering 0 polarity 1
[    3.003214] xen: --> pirq=20 -> irq=20 (gsi=20)
[    3.003307] PCI: CLS 64 bytes, default 64
[    3.003486] kvm: no hardware support
[    3.003959] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    3.003968] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[    3.003981] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[    3.003991] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[    3.004049] microcode: Microcode Update Driver: v2.00
<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[    3.005765] NFS: Registering the id_resolver key type
[    3.005974] NTFS driver 2.1.30 [Flags: R/O].
[    3.006049] fuse init (API version 7.18)
[    3.006299] Btrfs loaded
[    3.006306] msgmni has been set to 12819
[    3.006411] alg: No test for cipher_null (cipher_null-generic)
[    3.006460] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[    3.006508] alg: No test for digest_null (digest_null-generic)
[    3.006557] alg: No test for compress_null (compress_null-generic)
[    3.008053] alg: No test for stdrng (krng)
[    3.012363] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    3.012376] NET: Registered protocol family 38
[    3.012378] async_tx: api initialized (async)
[    3.012409] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 254)
[    3.012412] io scheduler noop registered
[    3.012413] io scheduler deadline registered
[    3.012450] io scheduler cfq registered (default)
[    3.013507] pcieport 0000:00:1c.0: Signaling PME through PCIe PME
interrupt
[    3.013515] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme
loaded
[    3.013541] pcieport 0000:00:1c.1: Signaling PME through PCIe PME
interrupt
[    3.013548] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme
loaded
[    3.013573] pcieport 0000:00:1c.3: Signaling PME through PCIe PME
interrupt
[    3.013575] pci 0000:43:00.0: Signaling PME through PCIe PME
interrupt
[    3.013582] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme
loaded
[    3.013607] pcieport 0000:00:1c.5: Signaling PME through PCIe PME
interrupt
[    3.013609] pci 0000:44:00.0: Signaling PME through PCIe PME
interrupt
[    3.013616] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme
loaded
[    3.013627] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.013629] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    3.014004] intel_idle: does not run on family 6 model 37
[    3.014132] ACPI: Deprecated procfs I/F for AC is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[    3.014209] ACPI: AC Adapter [AC] (on-line)
[    3.014266] input: Sleep Button
as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[    3.014272] ACPI: Sleep Button [SLPB]
[    3.014302] input: Lid Switch
as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    3.014327] ACPI: Lid Switch [LID]
[    3.014356] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    3.014359] ACPI: Power Button [PWRF]
[    3.014570] ACPI: Requesting acpi_cpufreq
[    3.025110] thermal LNXTHERM:00: registered as thermal_zone0
[    3.025112] ACPI: Thermal Zone [EXTZ] (51 C)
[    3.025148] thermal LNXTHERM:01: registered as thermal_zone1
[    3.025150] ACPI: Thermal Zone [EX2Z] (0 C)
[    3.025185] thermal LNXTHERM:02: registered as thermal_zone2
[    3.025187] ACPI: Thermal Zone [PWMZ] (0 C)
[    3.027733] thermal LNXTHERM:03: registered as thermal_zone3
[    3.027735] ACPI: Thermal Zone [LOCZ] (51 C)
[    3.028090] thermal LNXTHERM:04: registered as thermal_zone4
[    3.028092] ACPI: Thermal Zone [GFXZ] (0 C)
[    3.039728] thermal LNXTHERM:05: registered as thermal_zone5
[    3.039730] ACPI: Thermal Zone [BATZ] (31 C)
[    3.049407] thermal LNXTHERM:06: registered as thermal_zone6
[    3.049409] ACPI: Thermal Zone [EGXZ] (0 C)
[    3.049600] thermal LNXTHERM:07: registered as thermal_zone7
[    3.049602] ACPI: Thermal Zone [CPUZ] (60 C)
[    3.049733] thermal LNXTHERM:08: registered as thermal_zone8
[    3.049735] ACPI: Thermal Zone [MCHZ] (62 C)
[    3.049862] thermal LNXTHERM:09: registered as thermal_zone9
[    3.049863] ACPI: Thermal Zone [PCHZ] (68 C)
[    3.049938] ioatdma: Intel(R) QuickData Technology Driver 4.00
[    3.050128] Event-channel device installed.
[    3.050270] xen-pciback: backend is vpci
[    3.050630] Real Time Clock Driver v1.12b
[    3.050737] hpet_acpi_add: no address or irqs in _CRS
[    3.050784] Non-volatile memory driver v1.3
[    3.050843] Linux agpgart interface v0.103
[    3.050915] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    3.051115] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K
total, 262144K mappable
[    3.052379] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    3.052543] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
0xc0000000
[    3.052592] [drm] Initialized drm 1.1.0 20060810
[    3.052618] xen: registering gsi 16 triggering 0 polarity 1
[    3.052625] xen_map_pirq_gsi: returning irq 16 for gsi 16
[    3.052627] xen: --> pirq=16 -> irq=16 (gsi=16)
[    3.052629] Already setup the GSI :16
[    3.052754] i915 0000:00:02.0: setting latency timer to 64
[    3.102380] ACPI: Deprecated procfs I/F for battery is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[    3.102388] ACPI: Battery Slot [BAT0] (battery present)
[    3.135301] [drm] MTRR allocation failed.  Graphics performance may
suffer.
[    3.135451] [drm] Supports vblank timestamp caching Rev 1
(10.10.2010).
[    3.135453] [drm] Driver supports precise vblank timestamp query.
[    3.135483] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.599805] fbcon: inteldrmfb (fb0) is primary device
[    4.290979] Console: switching to colour frame buffer device 160x48
[    4.445266] fb0: inteldrmfb frame buffer device
[    4.445268] drm: registered panic notifier
[    4.449479] acpi device:0e: registered as cooling_device4
[    4.449665] input: Video Bus
as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3
[    4.449672] ACPI: Video Device [GFX0] (multi-head: yes  rom: no
post: no)
[    4.449700] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[    4.450313] loop: module loaded
[    4.450563] ahci 0000:00:1f.2: version 3.0
[    4.450579] xen: registering gsi 21 triggering 0 polarity 1
[    4.450593] xen: --> pirq=21 -> irq=21 (gsi=21)
[    4.450768] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps
0x13 impl SATA mode
[    4.450771] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo
pio slum part ems sxs apst 
[    4.450779] ahci 0000:00:1f.2: setting latency timer to 64
[    4.454405] scsi0 : ahci
[    4.454485] scsi1 : ahci
[    4.454547] scsi2 : ahci
[    4.454609] scsi3 : ahci
[    4.454675] scsi4 : ahci
[    4.454739] scsi5 : ahci
[    4.454863] ata1: SATA max UDMA/133 abar m2048@0xd4907000 port
0xd4907100 irq 301
[    4.454866] ata2: SATA max UDMA/133 abar m2048@0xd4907000 port
0xd4907180 irq 301
[    4.454868] ata3: DUMMY
[    4.454869] ata4: DUMMY
[    4.454872] ata5: SATA max UDMA/133 abar m2048@0xd4907000 port
0xd4907300 irq 301
[    4.454873] ata6: DUMMY
[    4.455061] tun: Universal TUN/TAP device driver, 1.6
[    4.455063] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    4.455121] e1000: Intel(R) PRO/1000 Network Driver - version
7.3.21-k8-NAPI
[    4.455124] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    4.455139] PPP generic driver version 2.4.2
[    4.455193] PPP BSD Compression module registered
[    4.455194] PPP Deflate Compression module registered
[    4.455533] PPP MPPE Compression module registered
[    4.455536] NET: Registered protocol family 24
[    4.455754] hso: drivers/net/usb/hso.c: Option Wireless
[    4.455772] usbcore: registered new interface driver hso
[    4.455780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[    4.455799] xen: registering gsi 16 triggering 0 polarity 1
[    4.455803] xen_map_pirq_gsi: returning irq 16 for gsi 16
[    4.455805] xen: --> pirq=16 -> irq=16 (gsi=16)
[    4.455806] Already setup the GSI :16
[    4.455834] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.455839] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    4.455862] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[    4.455921] ehci_hcd 0000:00:1a.0: debug port 2
[    4.459829] ehci_hcd 0000:00:1a.0: cache line size of 64 is not
supported
[    4.459855] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4909000
[    4.465056] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.465205] hub 1-0:1.0: USB hub found
[    4.465209] hub 1-0:1.0: 2 ports detected
[    4.465269] xen: registering gsi 20 triggering 0 polarity 1
[    4.465273] xen_map_pirq_gsi: returning irq 20 for gsi 20
[    4.465274] xen: --> pirq=20 -> irq=20 (gsi=20)
[    4.465276] Already setup the GSI :20
[    4.465298] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.465303] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    4.465310] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[    4.465353] ehci_hcd 0000:00:1d.0: debug port 2
[    4.469250] ehci_hcd 0000:00:1d.0: cache line size of 64 is not
supported
[    4.469268] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd4908000
[    4.475049] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.475185] hub 2-0:1.0: USB hub found
[    4.475188] hub 2-0:1.0: 2 ports detected
[    4.475240] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.475251] Initializing USB Mass Storage driver...
[    4.475264] usbcore: registered new interface driver usb-storage
[    4.475266] USB Mass Storage support registered.
[    4.475307] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[    4.477058] i8042: Detected active multiplexing controller, rev 1.1
[    4.477810] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.477835] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.477851] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.477865] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.477880] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.477970] mousedev: PS/2 mouse device common for all mice
[    4.478206] md: linear personality registered for level -1
[    4.478208] md: raid0 personality registered for level 0
[    4.478210] md: raid1 personality registered for level 1
[    4.478211] md: raid10 personality registered for level 10
[    4.478213] md: raid6 personality registered for level 6
[    4.478214] md: raid5 personality registered for level 5
[    4.478216] md: raid4 personality registered for level 4
[    4.478217] md: multipath personality registered for level -4
[    4.478306] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel@xxxxxxxxxx
[    4.478454] device-mapper: multipath: version 1.3.0 loaded
[    4.478457] device-mapper: multipath round-robin: version 1.0.0
loaded
[    4.478459] device-mapper: multipath queue-length: version 0.1.0
loaded
[    4.478460] device-mapper: multipath service-time: version 0.2.0
loaded
[    4.478502] usbcore: registered new interface driver btusb
[    4.478523] sdhci: Secure Digital Host Controller Interface driver
[    4.478524] sdhci: Copyright(c) Pierre Ossman
[    4.478536] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    4.478537] wbsd: Copyright(c) Pierre Ossman
[    4.478549] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.478699] usbcore: registered new interface driver usbhid
[    4.478700] usbhid: USB HID core driver
[    4.478736] zram: num_devices not specified. Using default: 1
[    4.478738] zram: Creating 1 devices ...
[    4.478841] hp_accel: hardware type HPB432x found
[    4.479462] lis3lv02d: 8 bits sensor found
[    4.499638] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input4
[    4.515116] input: ST LIS3LV02DL Accelerometer
as /devices/platform/lis3lv02d/input/input5
[    4.515216] Registered led device: hp::hddprotect
[    4.515225] hp_accel: driver loaded
[    4.517117] input: HP WMI hotkeys as /devices/virtual/input/input6
[    4.549173] intel ips 0000:00:1f.6: CPU TDP doesn't match expected
value (found 25, expected 29)
[    4.549183] xen: registering gsi 18 triggering 0 polarity 1
[    4.549192] xen: --> pirq=18 -> irq=18 (gsi=18)
[    4.549327] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp
limit 90
[    4.554389] snd_hda_intel 0000:00:1b.0: power state changed by ACPI
to D0
[    4.554396] snd_hda_intel 0000:00:1b.0: power state changed by ACPI
to D0
[    4.554404] xen: registering gsi 17 triggering 0 polarity 1
[    4.554407] xen_map_pirq_gsi: returning irq 17 for gsi 17
[    4.554408] xen: --> pirq=17 -> irq=17 (gsi=17)
[    4.554410] Already setup the GSI :17
[    4.573024] Netfilter messages via NETLINK v0.30.
[    4.573039] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    4.573138] ctnetlink v0.93: registering with nfnetlink.
[    4.573190] IPv4 over IPv4 tunneling driver
[    4.573267] gre: GRE over IPv4 demultiplexor driver
[    4.573268] ip_gre: GRE over IPv4 tunneling driver
[    4.573373] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.573398] TCP: cubic registered
[    4.573399] Initializing XFRM netlink socket
[    4.573482] NET: Registered protocol family 10
[    4.573727] Mobile IPv6
[    4.573729] IPv6 over IPv4 tunneling driver
[    4.573890] NET: Registered protocol family 17
[    4.573896] NET: Registered protocol family 15
[    4.573909] Bridge firewalling registered
[    4.573983] Bluetooth: RFCOMM TTY layer initialized
[    4.573985] Bluetooth: RFCOMM socket layer initialized
[    4.573986] Bluetooth: RFCOMM ver 1.11
[    4.573988] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.573990] Bluetooth: BNEP filters: protocol multicast
[    4.573991] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.574016] lib80211: common routines for IEEE802.11 drivers
[    4.574018] lib80211_crypt: registered algorithm 'NULL'
[    4.574019] Registering the dns_resolver key type
[    4.762082] ata5: SATA link down (SStatus 0 SControl 300)
[    4.762128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.762158] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.763231] ata2.00: unexpected _GTF length (8)
[    4.763544] ata2.00: ATA-8: ST9250410AS, 0006HPM1, max UDMA/100
[    4.763551] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[    4.764992] ata2.00: unexpected _GTF length (8)
[    4.765279] ata2.00: configured for UDMA/100
[    4.767057] usb 1-1: new high-speed USB device number 2 using
ehci_hcd
[    4.772997] ata1.00: unexpected _GTF length (8)
[    4.773778] ata1.00: ATA-8: KINGSTON SH100S3120G, 332ABBF0, max
UDMA/133
[    4.773784] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[    4.782993] ata1.00: unexpected _GTF length (8)
[    4.783742] ata1.00: configured for UDMA/133
[    4.783929] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SH100S3
332A PQ: 0 ANSI: 5
[    4.784051] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.784059] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120
GB/111 GiB)
[    4.784167] sd 0:0:0:0: [sda] Write Protect is off
[    4.784171] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.784195] scsi 1:0:0:0: Direct-Access     ATA      ST9250410AS
0006 PQ: 0 ANSI: 5
[    4.784199] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    4.784317] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    4.784320] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250
GB/232 GiB)
[    4.784418] sd 1:0:0:0: [sdb] Write Protect is off
[    4.784422] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.784461] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    4.785749]  sda: sda1 sda2
[    4.786090] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.847077]  sdb: sdb1 sdb2 sdb3
[    4.847419] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.881722] hub 1-1:1.0: USB hub found
[    4.881796] hub 1-1:1.0: 6 ports detected
[    4.882148] registered taskstats version 1
[    4.883441] ALSA device list:
[    4.883443]   #0: HDA Intel at 0xd4900000 irq 302
[    4.883475] Waiting 1sec before mounting root device...
[    4.984047] usb 2-1: new high-speed USB device number 2 using
ehci_hcd
[    5.098720] hub 2-1:1.0: USB hub found
[    5.098798] hub 2-1:1.0: 8 ports detected
[    5.173180] usb 1-1.4: new low-speed USB device number 3 using
ehci_hcd
[    5.275883] input: Logitech USB Receiver
as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7
[    5.275963] generic-usb 0003:046D:C518.0001: input: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input0
[    5.281393] input: Logitech USB Receiver
as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input8
[    5.281441] generic-usb 0003:046D:C518.0002: input: USB HID v1.11
Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input1
[    5.354178] usb 1-1.5: new high-speed USB device number 4 using
ehci_hcd
[    5.884137] md: Skipping autodetection of RAID arrays.
(raid=autodetect will force)
[    5.888628] EXT4-fs (sda2): mounted filesystem with writeback data
mode. Opts: (null)
[    5.888640] VFS: Mounted root (ext4 filesystem) readonly on device
8:2.
[    5.889586] devtmpfs: mounted
[    5.889807] Freeing unused kernel memory: 564k freed
[    6.372891] udevd[232]: starting version 182
[    6.460390] cfg80211: Calling CRDA to update world regulatory domain
[    6.461167] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.461207] xen: registering gsi 17 triggering 0 polarity 1
[    6.461216] xen_map_pirq_gsi: returning irq 17 for gsi 17
[    6.461218] xen: --> pirq=17 -> irq=17 (gsi=17)
[    6.461223] Already setup the GSI :17
[    6.461645] r8169 0000:44:00.0: eth0: RTL8168d/8111d at
0xffffc900100aa000, 98:4b:e1:8d:13:c4, XID 083000c0 IRQ 303
[    6.461651] r8169 0000:44:00.0: eth0: jumbo features [frames: 9200
bytes, tx checksumming: ko]
[    6.472265] xen: registering gsi 19 triggering 0 polarity 1
[    6.472276] xen_map_pirq_gsi: returning irq 19 for gsi 19
[    6.472279] xen: --> pirq=19 -> irq=19 (gsi=19)
[    6.472282] Already setup the GSI :19
[    6.474473] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt:
3090, rf: 0005, rev: 3213.
[    6.474591] ieee80211 phy0: Selected rate control algorithm
'minstrel_ht'
[    6.474841] Registered led device: rt2800pci-phy0::radio
[    6.474863] Registered led device: rt2800pci-phy0::assoc
[    6.474887] Registered led device: rt2800pci-phy0::quality
[    6.705185] usb 2-1.1: new high-speed USB device number 3 using
ehci_hcd
[    7.115773] scsi6 : usb-storage 2-1.1:1.0
[    7.279936] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4,
id: 0x1e0b1, caps: 0xd04733/0xe40000/0x5a0400
[    7.323487] input: SynPS/2 Synaptics TouchPad
as /devices/platform/i8042/serio4/input/input9
[    7.865566] Adding 4194300k swap on /dev/sdb2.  Priority:1 extents:1
across:4194300k 
[    8.126379] EXT4-fs (sda2): re-mounted. Opts:
discard,barrier=0,errors=remount-ro
[    8.139122] scsi 6:0:0:0: Direct-Access     Kingmax  USB2.0 FlashDisk
1100 PQ: 0 ANSI: 0 CCS
[    8.139957] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    8.143469] sd 6:0:0:0: [sdc] 7471104 512-byte logical blocks: (3.82
GB/3.56 GiB)
[    8.144945] sd 6:0:0:0: [sdc] Write Protect is off
[    8.144948] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    8.146435] sd 6:0:0:0: [sdc] No Caching mode page present
[    8.146437] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    8.152676] sd 6:0:0:0: [sdc] No Caching mode page present
[    8.152679] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    8.153819]  sdc: sdc1
[    8.159607] sd 6:0:0:0: [sdc] No Caching mode page present
[    8.159610] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    8.159613] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    8.279568] EXT4-fs (sdb3): barriers disabled
[    8.284859] EXT4-fs (sdb3): mounted filesystem with writeback data
mode. Opts: barrier=0,errors=remount-ro
[   10.536797] r8169 0000:44:00.0: eth0: link down
[   10.536846] r8169 0000:44:00.0: eth0: link down
[   10.537664] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.040624] EXT4-fs (zram0): barriers disabled
[   11.040875] EXT4-fs (zram0): mounted filesystem with ordered data
mode. Opts: barrier=0
[   12.213676] r8169 0000:44:00.0: eth0: link up
[   12.214343] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.119051] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[   18.119069] [drm:kick_ring] *ERROR* Kicking stuck wait on render ring
[   22.697052] eth0: no IPv6 routers present
[   26.775034] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[   29.074630] ata1.00: configured for UDMA/133
[   29.074640] ata1: EH complete
[   29.141835] ata2.00: configured for UDMA/100
[   29.141842] ata2: EH complete
[   29.200168] EXT4-fs (sda2): re-mounted. Opts:
discard,barrier=0,errors=remount-ro,commit=0
[   29.207084] EXT4-fs (sdb3): re-mounted. Opts:
barrier=0,errors=remount-ro,commit=0
[   29.213255] EXT4-fs (zram0): re-mounted. Opts: barrier=0,commit=0
[   30.811043] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[   32.895044] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[   32.895175] [drm:i915_reset] *ERROR* GPU hanging too fast, declaring
wedged!
[   32.895178] [drm:i915_reset] *ERROR* Failed to reset chip.
[   40.516412] ------------[ cut here ]------------
[   40.516425] WARNING: at drivers/gpu/drm/i915/i915_gem.c:2410
i915_gem_object_put_fence+0x9c/0xb0()
[   40.516427] Hardware name: HP ProBook 4320s
[   40.516429] Modules linked in: psmouse rt2800pci eeprom_93cx6
rt2x00pci rt2800lib rt2x00lib mac80211 r8169 cfg80211
[   40.516440] Pid: 1045, comm: X Not tainted 3.4.0 #4
[   40.516441] Call Trace:
[   40.516448]  [<ffffffff8107ae0b>] ? warn_slowpath_common+0x7b/0xc0
[   40.516450]  [<ffffffff814629dc>] ? i915_gem_object_put_fence
+0x9c/0xb0
[   40.516453]  [<ffffffff81463e81>] ? i915_gem_object_unbind+0x91/0x1f0
[   40.516455]  [<ffffffff81463ff9>] ? i915_gem_free_object_tail
+0x19/0xc0
[   40.516459]  [<ffffffff814407c8>] ? drm_gem_handle_delete+0x118/0x140
[   40.516462]  [<ffffffff8143ea6e>] ? drm_ioctl+0x2ce/0x4e0
[   40.516465]  [<ffffffff81440ca0>] ? drm_gem_destroy+0x50/0x50
[   40.516472]  [<ffffffff8110152e>] ? tlb_finish_mmu+0xe/0x50
[   40.516476]  [<ffffffff8113c1a6>] ? do_vfs_ioctl+0x96/0x500
[   40.516479]  [<ffffffff811088da>] ? remove_vma+0x4a/0x70
[   40.516481]  [<ffffffff81109ad5>] ? do_munmap+0x2d5/0x360
[   40.516483]  [<ffffffff8113c659>] ? sys_ioctl+0x49/0x80
[   40.516490]  [<ffffffff817cc639>] ? system_call_fastpath+0x16/0x1b
[   40.516496] ---[ end trace cd5c0010804adb29 ]---



_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Video Projectors]     [PDAs]     [Free Online Dating]     [Linux Kernel]     [Linux SCSI]     [XFree86] [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Video Projectors]     [PDAs]     [Free Online Dating]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Devices]

Add to Google Powered by Linux