why doesn't multipathd use the device?
|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
We have hit this problem a couple of times now on our RHEL 6.2 initiators using our FC target. We have many dm devices which should have 4 paths to each. Sometimes we see that some of the dm devices do not have the 4 paths. The underlying /dev/sd devices do exist but they are not used by the dm device. Here is what I see:
mpathbbt (3624a9370f9b69331bb3d16650001000b) dm-11 PURE,FlashArray size=500G features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=active |- 1:0:1:12 sds 65:32 active ready running `- 1:0:0:12 sdae 65:224 active ready running
However there are devices for the remaining two paths they are just not being used by multipathd:
/dev/sg18 1 0 1 12 0 /dev/sds PURE FlashArray 100 /dev/sg30 1 0 0 12 0 /dev/sdae PURE FlashArray 100 /dev/sg39 0 0 1 12 0 /dev/sdan PURE FlashArray 100 /dev/sg48 0 0 0 12 0 /dev/sdaw PURE FlashArray 100
You can see by the LUN serial number that the devices do point to the same LUN on the array. I am including just the LUN serial number, page 0x80, in the interest of space page 0x83's NAA number also matches for the 4 devices:
Jun 21 09:23:50 r13init31 kernel: sd 0:0:1:12: [sdan] Attached SCSI disk Jun 21 09:23:50 r13init31 multipathd: sdan: add path (uevent) Jun 21 09:23:50 r13init31 multipathd: mpathbbt: failed in domap for addition of new path sdan
My multipath tools version is:
Any ideas why the paths are being rejected by domap?
-- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel