Re: mpathpersist

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Thanks for trying out this patch and for your comments.

Patch is made on top of commit fa7074f35c67ff1ef29f1aea5a484c5dea25863a
. 
Please let me know if you still face any issue in applying patch on this
commit. 
Meanwhile I will rebase the changes to HEAD   before resending it.

Any feedback for your verification would be appreciated.   

On 12/31/2010 11:23 PM, Fil wrote:
> oops sorry, I was reading something else you responded to so
automatically I
> wrote to you....
> On 12/31/2011 09:00 AM, Christophe Varoqui wrote:
> >
> >> I have seen your set of patches for persistent reservation of
> >> multipath devices and wanted to try them out. While trying this
patch
> >> set I have run into several issues. Which code base can I apply
this
> >> against? Any help would be greatly appreciated. Issues are listed
below.
> >
> > This patchset has been developped by Netapp's Vijay Chauhan.
> >
> >> 2. I pulled multipath-tools from opensvc git and that patching
failed
> >> too, so I had to apply all the patches manually.
> >>
> > This is the correct project repository. The patchset may need
rebasing
> > over the HEAD. If it does not apply cleanly there, you might try to
> > revert to a previous commit.
> >
> > I'll try this patchset soon and compare my experience with your
> > observations.
> >
> > Thanks for the report.
> >
> >> 3. while testing mppersist I get following error:
> >> 
> >> mpathpersist --out --register --param-sark=123abc --prout-type=8
> >> /dev/mapper/blah -v 4 Dec 31 00:54:29 | alias = blah Dec 31
00:54:29
> >> | params = 0 0 1 1 round-robin 0 2 1 8:0 1 8:16 1 Dec 31 00:54:29 |
> >> status = 2 0 0 0 1 1 A 0 2 0 8:0 A 0 8:16 A 0 Dec 31 00:54:29 |
blah:
> >> disassemble map [0 0 1 1 round-robin 0 2 1 8:0 1
> >> 8:16 1 ]
> >> Dec 31 00:54:29 | 8:0: not found in pathvec Dec 31 00:54:29 | 8:16:
> >> not found in pathvec Dec 31 00:54:29 | No device found for 8:0
> >>

Please try patch on the commit version mentioned above and let me know
if 
you still face issue 3 and issue 4? 

> >> Dec 31 00:54:29 | No device found for 8:16
> >>
> >> Dec 31 00:54:29 | blah: disassemble status [2 0 0 0 1 1 A 0 2 0 8:0
A
> >> 0
> >> 8:16 A 0 ]
> >> Dec 31 00:54:29 | 36001405c55fc03cd8193d491eda0d4d7: no path
> >> available PR out: command failed
> >>
> >> 4. with all patches applied, all multipathd cli commands crash the
daemon.
> >>

You may need specify reservation_key keyword in following format in
either 
multipath section or default section for the applicable devices. In case
if reservation_key
 is not mentioned in multipath.conf then multipathd would not check for
persistent reservation 
for newly discovered path and reinstated path.

reservation_key  <reservation key>

Example:
 multipaths {
        multipath {
                          wwid   XXXXXXXXXXXXXXXX
                         alias      yellow
                         reservation_key  0x123abc
      }
}

> >> here are my configs:
> >>
> >> cat /etc/multipath.conf
> >> defaults {
> >> 	user_friendly_names	yes
> >> 	polling_interval	10
> >> }
> >>
> >> multipaths {
> >> 	multipath {
> >> 		wwid
> 	36001405c55fc03cd8193d491eda0d4d7
> >> 		alias			blah
> >> 	}
> >> }
> >>
> >>
> >> devices {
> >> 	device {
> >> 		vendor			"QNAP"
> >> 		product			"iSCSI Storage"
> >> 		path_selector		"round-robin 0"
> >> 		path_grouping_policy	multibus
> >> 		getuid_callout          "/lib/udev/scsi_id -g -u -d
/dev/%n"
> >> 		path_checker		directio
> >> 		failback		immediate
> >> 	}
> >>
> >> }
> >>
> >> blacklist {
> >>         devnode "^(vd)[a-z]"
> >> }
> >>
> >> multipath -ll -v3
> >> Dec 31 00:59:01 | loading /lib64/multipath/libcheckdirectio.so
> >> checker Dec 31 00:59:01 | loading /lib64/multipath/libprioconst.so
> >> prioritizer Dec 31 00:59:01 | loop0: device node name blacklisted
Dec
> >> 31 00:59:01 | loop1: device node name blacklisted Dec 31 00:59:01 |
> >> loop2: device node name blacklisted Dec 31 00:59:01 | loop3: device
> >> node name blacklisted Dec 31 00:59:01 | loop4: device node name
> >> blacklisted Dec 31 00:59:01 | loop5: device node name blacklisted
Dec
> >> 31 00:59:01 | loop6: device node name blacklisted Dec 31 00:59:01 |
> >> loop7: device node name blacklisted Dec 31 00:59:01 | vda: device
> >> node name blacklisted Dec 31 00:59:01 | dm-0: device node name
> >> blacklisted Dec 31 00:59:01 | dm-1: device node name blacklisted
Dec
> >> 31 00:59:01 | dm-2: device node name blacklisted Dec 31 00:59:01 |
> >> dm-3: device node name blacklisted Dec 31 00:59:01 | sda: not found
> >> in pathvec Dec 31 00:59:01 | sda: mask = 0x5 Dec 31 00:59:01 | sda:
> >> dev_t = 8:0 Dec 31 00:59:01 | sda: size = 20971520 Dec 31 00:59:01
|
> >> sda: vendor = QNAP Dec 31 00:59:01 | sda: product = iSCSI Storage
Dec
> >> 31 00:59:01 | sda: rev = 3.1 Dec 31 00:59:01 | sda: h:b:t:l =
2:0:0:0
> >> Dec 31 00:59:01 | sda: path state = running Dec 31 00:59:01 | sda:
> >> get_state Dec 31 00:59:01 | sda: path checker = directio
(controller
> >> setting) Dec 31 00:59:01 | sda: checker timeout = 30000 ms (sysfs
> >> setting) Dec 31 00:59:01 | directio: starting new request Dec 31
> >> 00:59:01 | directio: io finished 4096/0 Dec 31 00:59:01 | sda:
state
> >> = up Dec 31 00:59:01 | sdb: not found in pathvec Dec 31 00:59:01 |
> >> sdb: mask = 0x5 Dec 31 00:59:01 | sdb: dev_t = 8:16 Dec 31 00:59:01
|
> >> sdb: size = 20971520 Dec 31 00:59:01 | sdb: vendor = QNAP Dec 31
> >> 00:59:01 | sdb: product = iSCSI Storage Dec 31 00:59:01 | sdb: rev
=
> >> 3.1 Dec 31 00:59:01 | sdb: h:b:t:l = 3:0:0:0 Dec 31 00:59:01 | sdb:
> >> path state = running Dec 31 00:59:01 | sdb: get_state Dec 31
00:59:01
> >> | sdb: path checker = directio (controller setting) Dec 31 00:59:01
|
> >> sdb: checker timeout = 30000 ms (sysfs setting) Dec 31 00:59:01 |
> >> directio: starting new request Dec 31 00:59:01 | directio: io
> >> finished 4096/0 Dec 31 00:59:01 | sdb: state = up Dec 31 00:59:01 |
> >> dm-4: device node name blacklisted ===== paths list =====
> >> uuid hcil    dev dev_t pri dm_st chk_st vend/prod/rev      dev_st
> >>      2:0:0:0 sda 8:0   -1  undef ready  QNAP,iSCSI Storage running
> >>      3:0:0:0 sdb 8:16  -1  undef ready  QNAP,iSCSI Storage running
> >> Dec 31 00:59:01 | params = 0 0 1 1 round-robin 0 2 1 8:0 1 8:16 1
Dec
> >> 31 00:59:01 | status = 2 0 0 0 1 1 A 0 2 0 8:0 A 0 8:16 A 0 Dec 31
> >> 00:59:01 | blah: disassemble map [0 0 1 1 round-robin 0 2 1 8:0 1
> >> 8:16 1 ]
> >> Dec 31 00:59:01 | sda: mask = 0x8
> >> Dec 31 00:59:01 | sda: path state = running Dec 31 00:59:01 | sda:
> >> prio = const (internal default) Dec 31 00:59:01 | sda: prio =
> >> (internal default) Dec 31 00:59:01 | sda: const prio = 1 Dec 31
> >> 00:59:01 | sdb: mask = 0x8 Dec 31 00:59:01 | sdb: path state =
> >> running Dec 31 00:59:01 | sdb: prio = const (internal default) Dec
31
> >> 00:59:01 | sdb: prio =  (internal default) Dec 31 00:59:01 | sdb:
> >> const prio = 1 Dec 31 00:59:01 | blah: disassemble status [2 0 0 0
1
> >> 1 A 0 2 0 8:0 A 0
> >> 8:16 A 0 ]
> >> blah (36001405c55fc03cd8193d491eda0d4d7) dm-4 QNAP,iSCSI Storage
> >> size=10G features='0' hwhandler='0' wp=rw
> >> `-+- policy='round-robin 0' prio=0 status=active
> >>   |- 2:0:0:0 sda 8:0  active ready running
> >>   `- 3:0:0:0 sdb 8:16 active ready running Dec 31 00:59:01 |
directio
> >> checker refcount 2 Dec 31 00:59:01 | directio checker refcount 1
Dec
> >> 31 00:59:01 | unloading const prioritizer Dec 31 00:59:01 |
unloading
> >> directio checker

Thanks,
Vijay

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel


[DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

Add to Google Powered by Linux