Re: [PATCH v6 4/5] i2c: aspeed: added driver for Aspeed I2C

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Mar 28, 2017 at 3:42 PM, Brendan Higgins
<brendanhiggins@xxxxxxxxxx> wrote:
> Added initial master support for Aspeed I2C controller. Supports
> fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed.

Mention that the driver supports byte at a time access only at this stage.

> Signed-off-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx>

Looking good. I've given this a spin on ast2500 hardware and it worked for me.

I've got a bunch of nits below, and one bigger question about weather
we need internal locking in the driver, or if we can rely on the i2c
core for our locks.

> ---
>  drivers/i2c/busses/Kconfig      |  10 +
>  drivers/i2c/busses/Makefile     |   1 +
>  drivers/i2c/busses/i2c-aspeed.c | 610 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 621 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-aspeed.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 8adc0f1d7ad0..e5ea5641a874 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -326,6 +326,16 @@ config I2C_POWERMAC
>
>  comment "I2C system bus drivers (mostly embedded / system-on-chip)"
>
> +config I2C_ASPEED
> +       tristate "Aspeed AST2xxx SoC I2C Controller"

Aspeed I2C Controller

> +       depends on ARCH_ASPEED
> +       help
> +         If you say yes to this option, support will be included for the
> +         Aspeed AST2xxx SoC I2C controller.

And again.

> +
> +         This driver can also be built as a module.  If so, the module
> +         will be called i2c-aspeed.
> +
>  config I2C_AT91
>         tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
>         depends on ARCH_AT91

> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> new file mode 100644
> index 000000000000..04266acc6c46
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-aspeed.c

> +       spin_unlock_irqrestore(&bus->lock, flags);
> +
> +       return ret;
> +}
> +
> +static void do_start(struct aspeed_i2c_bus *bus)

aspeed_i2c_do_start

> +{
> +       u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
> +       struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
> +       u8 slave_addr = msg->addr << 1;
> +
> +       bus->master_state = ASPEED_I2C_MASTER_START;
> +       bus->buf_index = 0;
> +
> +       if (msg->flags & I2C_M_RD) {
> +               slave_addr |= 1;
> +               command |= ASPEED_I2CD_M_RX_CMD;
> +               /* Need to let the hardware know to NACK after RX. */
> +               if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
> +                       command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
> +       }
> +
> +       aspeed_i2c_write(bus, slave_addr, ASPEED_I2C_BYTE_BUF_REG);
> +       aspeed_i2c_write(bus, command, ASPEED_I2C_CMD_REG);
> +}
> +
> +static void do_stop(struct aspeed_i2c_bus *bus)

aspeed_i2c_do_stop

> +{
> +       bus->master_state = ASPEED_I2C_MASTER_STOP;
> +       aspeed_i2c_write(bus, ASPEED_I2CD_M_STOP_CMD,
> +                        ASPEED_I2C_CMD_REG);
> +}

> +static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> +{
> +       struct aspeed_i2c_bus *bus;
> +       struct resource *res;
> +       int ret;
> +
> +       bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
> +       if (!bus)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       bus->base = devm_ioremap_resource(&pdev->dev, res);
> +       if (IS_ERR(bus->base)) {
> +               dev_err(&pdev->dev, "failed to devm_ioremap_resource\n");

devm_ioremap_resource shows an error for you, please drop the dev_err here.

> +               return PTR_ERR(bus->base);
> +       }
> +
> +       bus->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
> +       ret = devm_request_irq(&pdev->dev, bus->irq, aspeed_i2c_bus_irq,
> +                              IRQF_SHARED, dev_name(&pdev->dev), bus);

Is this requesting an IRQ from your i2c-irq-controller? In which case
the IRQ won't be shared with any other driver, so you don't need to
set IRQF_SHARED.

> +       if (ret < 0) {
> +               dev_err(&pdev->dev, "failed to request interrupt\n");
> +               return ret;
> +       }
> +
> +       /* Initialize the I2C adapter */
> +       spin_lock_init(&bus->lock);

Do we need this lock at all?

The i2c core provides locking around operations on the bus. I was
browsing some of the other bus drivers and they do not have locking
inside of the driver (eg. i2c-at91.c). I also did a test of an earlier
version of this driver where I removed the locks, and it performed
correctly in my testing (http://patchwork.ozlabs.org/patch/731899/).

> +       init_completion(&bus->cmd_complete);
> +       bus->adap.owner = THIS_MODULE;
> +       bus->adap.retries = 0;
> +       bus->adap.timeout = 5 * HZ;
> +       bus->adap.algo = &aspeed_i2c_algo;
> +       bus->adap.algo_data = bus;
> +       bus->adap.dev.parent = &pdev->dev;
> +       bus->adap.dev.of_node = pdev->dev.of_node;
> +       snprintf(bus->adap.name, sizeof(bus->adap.name), "Aspeed i2c");

> +static struct platform_driver aspeed_i2c_bus_driver = {
> +       .probe          = aspeed_i2c_probe_bus,
> +       .remove         = aspeed_i2c_remove_bus,
> +       .driver         = {
> +               .name           = "ast-i2c-bus",

aspeed-i2c-bus please.

> +               .of_match_table = aspeed_i2c_bus_of_table,
> +       },
> +};
> +module_platform_driver(aspeed_i2c_bus_driver);
> +
> +MODULE_AUTHOR("Brendan Higgins <brendanhiggins@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.12.2.564.g063fe858b8-goog
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux