Re: LVM2 logical volumes on Loop-AES | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
On Mon, 20 Aug 2007 12:00:46 +0300
Jari Ruusu <jariruusu@xxxxxxxxxxxxxxxxxxxxx> wrote:
> y=`expr ${y} + 100`
Jari, this is what happens when booting:
1 machine loads kernel
2 password requested and loopback is setup
3 then there is the following error
"Unable to make device node for 'vg-root'
/dev/vg: mkdir failed : No space left on device"
And boot ends with a system halt.
This is when y=`expr ${y} + 500`.
When y=`expr ${y} + 2` or y=`expr ${y} + 100` the following error is
returned on boot:
"/etc/lvm: mkdir failed: No space left on device"
Ah!
Regards
Fog_Watch.
grub.conf=
default 0
timeout 5
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title=Gentoo Linux 2.6.14-hardened-r8
root (hd0,0)
kernel /boot/kernel-2.6.14-hardened-r8 root=100 lvm2root=/dev/vg/root
init=/linuxrc rw rootfstype=minix
initrd /initrd.gz
build_init.sh=
Note that these lines required high levels of guessing.
Lines after ≅ 564
buf[0] = 0;
strCat(buf, "/lib/lvm vgscan --ignorelockingfailure");
exeWait(buf);
buf[0] = 0;
strCat(buf, "/lib/lvm vgchange -ay --ignorelockingfailure ");
exeWait(buf);
--
Lose wait. Get Gentoo.
-
Linux-crypto: cryptography in and on the Linux system
Archive: http://mail.nl.linux.org/linux-crypto/