Re: [PATCH v2 2/7] clk: samsung: add infrastructure to register cpu clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thomas,

> On Tue, Jan 21, 2014 at 3:55 PM, Lukasz Majewski
> <l.majewski@xxxxxxxxxxx> wrote:
> > Hi Thomas,
> >
> >> Hi Lukasz,
> >>
> >> On Mon, Jan 20, 2014 at 1:54 PM, Lukasz Majewski
> >> <l.majewski@xxxxxxxxxxx> wrote:
> >> > Hi Thomas,
> >> >
> >> >> From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> >> >>
> >> >> The CPU clock provider supplies the clock to the CPU clock
> >> >> domain. The composition and organization of the CPU clock
> >> >> provider could vary among Exynos SoCs. A CPU clock provider can
> >> >> be composed of clock mux, dividers and gates. This patch
> >> >> defines a new clock type for CPU clock provider and adds
> >> >> infrastructure to register the CPU clock providers for Samsung
> >> >> platforms.
> >> >>
> >> >> In addition to this, the arm cpu clock provider for Exynos4210
> >> >> and compatible SoCs is instantiated using the new cpu clock
> >> >> type. The clock frequency table and the clock configuration
> >> >> data for this clock is obtained from device tree. This
> >> >> implementation is reusable for Exynos4x12 and Exynos5250 SoCs
> >> >> as well.
> >> >>
> >> >> Cc: Tomasz Figa <t.figa@xxxxxxxxxxx>
> >> >> Cc: Lukasz Majewski <l.majewski@xxxxxxxxx>
> >> >> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> >> >> ---
> >> >>  drivers/clk/samsung/Makefile  |    2 +-
> >> >>  drivers/clk/samsung/clk-cpu.c |  345
> >> >> +++++++++++++++++++++++++++++++++++++++++
> >> >> drivers/clk/samsung/clk.h     |    3 + 3 files changed, 349
> >> >> insertions(+), 1 deletions(-) create mode 100644
> >> >> drivers/clk/samsung/clk-cpu.c
> >> >>
> >> >> diff --git a/drivers/clk/samsung/Makefile
> >> >> b/drivers/clk/samsung/Makefile index 8eb4799..e2b453f 100644
> >> >> --- a/drivers/clk/samsung/Makefile
> >> >> +++ b/drivers/clk/samsung/Makefile
> >> >> @@ -2,7 +2,7 @@
> >> >>  # Samsung Clock specific Makefile
> >> >>  #
> >> >>
> >> >> -obj-$(CONFIG_COMMON_CLK)     += clk.o clk-pll.o
> >> >> +obj-$(CONFIG_COMMON_CLK)     += clk.o clk-pll.o clk-cpu.o
> >> >>  obj-$(CONFIG_ARCH_EXYNOS4)   += clk-exynos4.o
> >> >>  obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
> >> >>  obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
> >> >> diff --git a/drivers/clk/samsung/clk-cpu.c
> >> >> b/drivers/clk/samsung/clk-cpu.c new file mode 100644
> >> >> index 0000000..92fba45
> >> >> --- /dev/null
> >> >> +++ b/drivers/clk/samsung/clk-cpu.c
> >> >> @@ -0,0 +1,345 @@
> >> >> +/*
> >> >> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> >> >> + * Author: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> >> >> + *
> >> >> + * This program is free software; you can redistribute it
> >> >> and/or modify
> >> >> + * it under the terms of the GNU General Public License
> >> >> version 2 as
> >> >> + * published by the Free Software Foundation.
> >> >> + *
> >> >> + * This file contains the utility functions to register the cpu
> >> >> clocks
> >> >> + * for samsung platforms.
> >> >> +*/
> >> >> +
> >> >> +#include <linux/errno.h>
> >> >> +#include "clk.h"
> >> >> +
> >> >> +#define SRC_CPU                      0x0
> >> >> +#define STAT_CPU             0x200
> >> >> +#define DIV_CPU0             0x300
> >> >> +#define DIV_CPU1             0x304
> >> >> +#define DIV_STAT_CPU0                0x400
> >> >> +#define DIV_STAT_CPU1                0x404
> >> >> +
> >> >> +/**
> >> >> + * struct samsung_cpuclk_freq_table: table of frequency
> >> >> supported by
> >> >> + * a cpu clock and associated data if any.
> >> >> + * @freq: points to a table of supported frequencies (in KHz)
> >> >> + * @freq_count: number of entries in the frequency table
> >> >> + * @data: cpu clock specific data, if any
> >> >> + *
> >> >> + * This structure holds the frequency options supported by the
> >> >> cpu clock in
> >> >> + * which this structure is contained. The data pointer is an
> >> >> optional data
> >> >> + * that can provide any additional configuration options for
> >> >> the supported
> >> >> + * frequencies. This structure is intended to be reusable for
> >> >> all cpu clocks
> >> >> + * in Samsung SoC based platforms
> >> >> + */
> >> >> +struct samsung_cpuclk_freq_table {
> >> >> +     const unsigned long     *freq;       /* in KHz */
> >> >> +     unsigned long           freq_count;
> >> >> +     const void              *data;
> >> >> +};
> >> >> +
> >> >> +/**
> >> >> + * struct exynos4210_freq_data: format of auxillary data
> >> >> associated with
> >> >> + * each frequency supported by the cpu clock for exynos4210.
> >> >> + * @parent_freq: The frequency of the parent clock required to
> >> >> generate the
> >> >> + * supported cpu clock speed.
> >> >> + * @div0: value to be programmed in the div_cpu0 register.
> >> >> + * @div1: value to be programmed in the div_cpu1 register.
> >> >> + *
> >> >> + * This structure holds the auxillary configuration data for
> >> >> each supported
> >> >> + * cpu clock frequency on Exynos4210 and compatible SoCs.
> >> >> + */
> >> >> +struct exynos4210_freq_data {
> >> >> +     unsigned long   parent_freq;
> >> >> +     unsigned int    div0;
> >> >> +     unsigned int    div1;
> >> >> +};
> >> >> +
> >> >> +/**
> >> >> + * struct samsung_cpuclk: information about clock supplied to a
> >> >> CPU core.
> >> >> + * @hw: handle between ccf and cpu clock.
> >> >> + * @ctrl_base: base address of the clock controller.
> >> >> + * @offset: offset from the ctrl_base address where the cpu
> >> >> clock div/mux
> >> >> + *          registers can be accessed.
> >> >> + * @parent: clock handle representing the clock output of the
> >> >> parent clock.
> >> >> + * @freq_table: the frequency table supported by this cpu
> >> >> clock.
> >> >> + */
> >> >> +struct samsung_cpuclk {
> >> >> +     struct clk_hw           hw;
> >> >> +     void __iomem            *ctrl_base;
> >> >> +     unsigned long           offset;
> >> >> +     struct clk              *parent;
> >> >> +     const struct samsung_cpuclk_freq_table *freq_table;
> >> >> +};
> >> >> +
> >> >> +#define to_samsung_cpuclk(hw)        container_of(hw, struct
> >> >> samsung_cpuclk, hw) +
> >> >> +/**
> >> >> + * struct samsung_cpuclk_match_data: soc specific data for cpu
> >> >> clocks.
> >> >> + * @parser: pointer to a function that can parse SoC specific
> >> >> cpu clock
> >> >> + *   frequency and associated configuration data.
> >> >> + * @offset: optional offset from base of clock controller
> >> >> register base,
> >> >> + *   to be used when accessing clock controller registers
> >> >> related to the
> >> >> + * cpu clock.
> >> >> + * @offset: offset from the ctrl_base address where the cpu
> >> >> clock div/mux
> >> >> + *   registers can be accessed.
> >> >> + */
> >> >> +struct samsung_cpuclk_match_data {
> >> >> +     int (*parser)(struct device_node *,
> >> >> +                     struct samsung_cpuclk_freq_table **);
> >> >> +     unsigned int offset;
> >> >> +};
> >> >> +
> >> >> +/* This is a helper function to perform clock rounding for cpu
> >> >> clocks. */ +static long samsung_cpuclk_round_rate(struct clk_hw
> >> >> *hw,
> >> >> +                     unsigned long drate, unsigned long *prate)
> >> >> +{
> >> >> +     struct samsung_cpuclk *cpuclk = to_samsung_cpuclk(hw);
> >> >> +     const struct samsung_cpuclk_freq_table *freq_tbl;
> >> >> +     int i;
> >> >> +
> >> >> +     freq_tbl = cpuclk->freq_table;
> >> >> +     drate /= 1000;
> >> >> +
> >> >> +     for (i = 0; i < freq_tbl->freq_count; i++) {
> >> >> +             if (drate >= freq_tbl->freq[i])
> >> >> +                     return freq_tbl->freq[i] * 1000;
> >> >> +     }
> >> >> +     return freq_tbl->freq[i - 1] * 1000;
> >> >> +}
> >> >> +
> >> >> +#define EXYNOS4210_ARM_DIV1(base) ((readl(base + DIV_CPU0) &
> >> >> 0xf)
> >> >> + 1) +#define EXYNOS4210_ARM_DIV2(base) (((readl(base +
> >> >> DIV_CPU0)
> >> >> >> 28) & 0xf) + 1) +
> >> >> +/*
> >> >> + * CPU clock speed for Exynos4210 and compatible SoCs is
> >> >> + * parent clock speed / core1_ratio / core2_ratio
> >> >> + */
> >> >> +static unsigned long exynos4210_armclk_recalc_rate(struct
> >> >> clk_hw *hw,
> >> >> +                             unsigned long parent_rate)
> >> >> +{
> >> >> +     struct samsung_cpuclk *armclk = to_samsung_cpuclk(hw);
> >> >> +     void __iomem *base = armclk->ctrl_base + armclk->offset;
> >> >> +
> >> >> +     return parent_rate / EXYNOS4210_ARM_DIV1(base) /
> >> >> +                             EXYNOS4210_ARM_DIV2(base);
> >> >> +}
> >> >> +
> >> >> +/* set rate callback for cpuclk type on Exynos4210 and similar
> >> >> SoCs */ +static int exynos4210_armclk_set_rate(struct clk_hw
> >> >> *hw, unsigned long drate,
> >> >> +                                     unsigned long prate)
> >> >> +{
> >> >> +     struct samsung_cpuclk *armclk = to_samsung_cpuclk(hw);
> >> >> +     const struct samsung_cpuclk_freq_table *freq_tbl;
> >> >> +     const struct exynos4210_freq_data *freq_data;
> >> >> +     unsigned long mux_reg, idx;
> >> >> +     void __iomem *base;
> >> >> +
> >> >> +     if (drate == prate)
> >> >> +             return 0;
> >> >> +
> >> >> +     freq_tbl = armclk->freq_table;
> >> >> +     freq_data = freq_tbl->data;
> >> >> +     base = armclk->ctrl_base + armclk->offset;
> >> >> +
> >> >> +     for (idx = 0; idx < freq_tbl->freq_count; idx++,
> >> >> freq_data++)
> >> >> +             if ((freq_tbl->freq[idx] * 1000) == drate)
> >> >> +                     break;
> >> >> +
> >> >> +     if (drate < prate) {
> >> >> +             mux_reg = readl(base + SRC_CPU);
> >> >> +             writel(mux_reg | (1 << 16), base + SRC_CPU);
> >> >> +             while (((readl(base + STAT_CPU) >> 16) & 0x7) !=
> >> >> 2)
> >> >> +                     ;
> >> >> +
> >> >> +             clk_set_rate(armclk->parent, drate);
> >> >> +     }
> >> >> +
> >> >> +     writel(freq_data->div0, base + DIV_CPU0);
> >> >> +     while (readl(base + DIV_STAT_CPU0) != 0)
> >> >> +             ;
> >> >> +     writel(freq_data->div1, base + DIV_CPU1);
> >> >> +     while (readl(base + DIV_STAT_CPU1) != 0)
> >> >> +             ;
> >> >> +
> >> >> +     if (drate > prate) {
> >> >> +             mux_reg = readl(base + SRC_CPU);
> >> >> +             writel(mux_reg | (1 << 16), base + SRC_CPU);
> >> >> +             while (((readl(base + STAT_CPU) >> 16) & 0x7) !=
> >> >> 2)
> >> >> +                     ;
> >> >> +
> >> >> +             clk_set_rate(armclk->parent,
> >> >> freq_data->parent_freq
> >> >> * 1000);
> >> >> +     }
> >> >> +
> >> >> +     mux_reg = readl(base + SRC_CPU);
> >> >> +     writel(mux_reg & ~(1 << 16), base + SRC_CPU);
> >> >> +     while (((readl(base + STAT_CPU) >> 16) & 0x7) != 1)
> >> >> +                     ;
> >> >> +     return 0;
> >> >> +}
> >> >> +
> >> >> +/* clock ops for armclk on Exynos4210 and compatible
> >> >> platforms. */ +static const struct clk_ops
> >> >> exynos4210_armclk_clk_ops = {
> >> >> +     .recalc_rate = exynos4210_armclk_recalc_rate,
> >> >> +     .round_rate = samsung_cpuclk_round_rate,
> >> >> +     .set_rate = exynos4210_armclk_set_rate,
> >> >> +};
> >> >> +
> >> >> +/* helper function to register a cpu clock */
> >> >> +static void __init samsung_cpuclk_register(unsigned int
> >> >> lookup_id,
> >> >> +             const char *name, const char *parent, const struct
> >> >> clk_ops *ops,
> >> >> +             const struct samsung_cpuclk_freq_table *freq_tbl,
> >> >> +             void __iomem *reg_base,
> >> >> +             const struct samsung_cpuclk_match_data *data)
> >> >> +{
> >> >> +     struct samsung_cpuclk *cpuclk;
> >> >> +     struct clk_init_data init;
> >> >> +     struct clk *clk;
> >> >> +
> >> >> +     cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL);
> >> >> +     if (!cpuclk) {
> >> >> +             pr_err("%s: could not allocate memory for cpuclk
> >> >> %s\n",
> >> >> +                                     __func__, name);
> >> >> +             return;
> >> >> +     }
> >> >> +
> >> >> +     init.name = name;
> >> >> +     init.flags = CLK_GET_RATE_NOCACHE;
> >> >> +     init.parent_names = &parent;
> >> >> +     init.num_parents = 1;
> >> >> +     init.ops = ops;
> >> >> +
> >> >> +     cpuclk->hw.init = &init;
> >> >> +     cpuclk->ctrl_base = reg_base;
> >> >> +     cpuclk->offset = data->offset;
> >> >> +     cpuclk->freq_table = freq_tbl;
> >> >> +     cpuclk->parent = __clk_lookup(parent);
> >> >> +
> >> >> +     clk = clk_register(NULL, &cpuclk->hw);
> >> >> +     if (IS_ERR(clk)) {
> >> >> +             pr_err("%s: could not register cpuclk %s\n",
> >> >> __func__,     name);
> >> >> +             kfree(cpuclk);
> >> >> +             return;
> >> >> +     }
> >> >> +     samsung_clk_add_lookup(clk, lookup_id);
> >> >> +}
> >> >> +
> >> >> +#define EXYNOS4210_DIV_CPU01(d0, d1, d2, d3, d4, d5, d6,
> >> >> d7)           \
> >> >> +             ((d0 << 28) | (d1 << 24) | (d2 << 20) | (d3
> >> >> << 16) |      \
> >> >> +              (d4 << 12) | (d5 << 8) | (d6 << 4) | (d7 << 0))
> >> >> +#define EXYNOS4210_DIV_CPU11(d0, d1,
> >> >> d2)                           \
> >> >> +             ((d0 << 8) | (d1 << 4) | (d2 << 0))
> >> >> +#define EXYNOS4210_CFG_LEN 13
> >> >> +
> >> >> +/*
> >> >> + * parse cpu clock frequency table and auxillary configuration
> >> >> data from dt
> >> >> + * for exynos4210 and compatible SoC's.
> >> >> + */
> >> >> +static int exynos4210_armclk_cfg_parser(struct device_node *np,
> >> >> +             struct samsung_cpuclk_freq_table **tbl)
> >> >> +{
> >> >> +     struct samsung_cpuclk_freq_table *freq_tbl;
> >> >> +     struct exynos4210_freq_data *fdata, *t_fdata;
> >> >> +     unsigned long *freqs, cfg[EXYNOS4210_CFG_LEN];
> >> >> +     const struct property *prop;
> >> >> +     unsigned int tbl_sz, i, j;
> >> >> +     const __be32 *val;
> >> >> +     int ret;
> >> >> +
> >> >> +     prop = of_find_property(np, "arm-frequency-table", NULL);
> >> >> +     if (!prop)
> >> >> +             return -EINVAL;
> >> >> +     if (!prop->value)
> >> >> +             return -EINVAL;
> >> >> +     if ((prop->length / sizeof(u32)) % EXYNOS4210_CFG_LEN)
> >> >
> >> > Cannot we have the EXYNOS4210_CFG_LEN parsed from DT as well?
> >>
> >> As per Rob's suggestion, the clock divider ration table will be
> >> removed. So this portion of the code will be reworked.
> >
> > Ok. Thanks.
> >
> >>
> >> >
> >> >> +             return -EINVAL;
> >> >> +     tbl_sz = (prop->length / sizeof(u32)) /
> >> >> EXYNOS4210_CFG_LEN; +
> >> >> +     freq_tbl = kzalloc(sizeof(*freq_tbl), GFP_KERNEL);
> >> >> +     if (!freq_tbl)
> >> >> +             return -ENOMEM;
> >> >> +
> >> >> +     freqs = kzalloc(sizeof(u32) * tbl_sz, GFP_KERNEL);
> >> >> +     if (!freqs) {
> >> >> +             ret = -ENOMEM;
> >> >> +             goto free_freq_tbl;
> >> >> +     }
> >> >> +
> >> >> +     fdata = kzalloc(sizeof(*fdata) * tbl_sz, GFP_KERNEL);
> >> >> +     if (!fdata) {
> >> >> +             ret = -ENOMEM;
> >> >> +             goto free_freqs;
> >> >> +     }
> >> >> +     t_fdata = fdata;
> >> >> +
> >> >> +     val = prop->value;
> >> >> +     for (i = 0; i < tbl_sz; i++, fdata++) {
> >> >> +             for (j = 0; j < EXYNOS4210_CFG_LEN; j++)
> >> >> +                     cfg[j] = be32_to_cpup(val++);
> >> >> +             freqs[i] = cfg[0];
> >> >> +             fdata->parent_freq = cfg[1];
> >> >
> >> > Why do we need the separate parent_freq entry here?
> >> >
> >> > In the patch 4/7 the freqs (cfg[0]) and parent_freq (cfg[1])
> >> > values are the same for all supported devices (at
> >> > "arm-frequency-table").
> >> >
> >> > What is the rationale for having those values duplicated in the
> >> > DT?
> >>
> >> The intention was to support frequencies which may not be direct
> >> output of the parent PLL clock. For instance, if the PLL supports
> >> 200MHz, 400MHz and 600MHz and the CPU clock needs to be set to
> >> 300MHz, then 600MHz / 2 is a valid clock output for the cpu clock.
	^^^^^^^^^^^^^^^^^^^^ [1]

> >> So this is an example where the cpu clock speed is different from
> >> its parent clock speed.
> >
> > But shall not this case been handled by CCF internally?
> 
> The divider which actually can divide the PLL clock output is now part
> of the larger cpu clock type. So it is the implementation of the
> set_rate function of the cpu clock that has to handle this division.
> So there is no core CCF support to handle this.

I rather thought about the situation you brought up [1].

I agree with the above statement, that it shall be divided internally
(with use of DIV_CORE and DIV_CORE2).

> 
> >
> > Is there any Samsung PLL clock, which has such property?
> 
> Yes, this functionality is available on all Exynos SoCs but it is not
> a Samsung PLL clock property.

So the example [1] cannot be applied to PLLs to Samsung SOCs?

> The PLL clock output can optionally be
> divided and then used as arm clock output.

It will be divided by DIV_CORE and DIV_CORE2, which will be done
internally (at .set_rate) at "armclk".

> 
> >
> >> If possible, I will try and remove the need for this table in the
> >> next version.
> >
> > Ok.
> 
> On second thoughts, it looks possible to get rid of this table and I
> am testing with this approach now.

Ok, thanks.

> 
> >
> >>
> >> Thanks,
> >> Thomas.
> >>
> >> >
> >> >
> >> >> +             fdata->div0 = EXYNOS4210_DIV_CPU01(cfg[9], cfg[8],
> >> >> cfg[7],
> >> >> +                             cfg[6], cfg[5], cfg[4], cfg[3],
> >> >> cfg[2]);
> >> >> +             fdata->div1 = EXYNOS4210_DIV_CPU11(cfg[12],
> >> >> cfg[11], cfg[10]);
> >> >> +     }
> >> >> +
> >> >> +     freq_tbl->freq = freqs;
> >> >> +     freq_tbl->freq_count = tbl_sz;
> >> >> +     freq_tbl->data = t_fdata;
> >> >> +     *tbl = freq_tbl;
> >> >> +     return 0;
> >> >> +
> >> >> +free_freqs:
> >> >> +     kfree(freqs);
> >> >> +free_freq_tbl:
> >> >> +     kfree(freq_tbl);
> >> >> +     return ret;
> >> >> +}
> >> >> +
> >> >> +static struct samsung_cpuclk_match_data
> >> >> exynos4210_cpuclk_match_data = {
> >> >> +     .parser = exynos4210_armclk_cfg_parser,
> >> >> +     .offset = 0x14200,
> >> >> +};
> >> >> +
> >> >> +static struct samsung_cpuclk_match_data
> >> >> exynos5250_cpuclk_match_data = {
> >> >> +     .parser = exynos4210_armclk_cfg_parser,
> >> >> +     .offset = 0x200,
> >> >> +};
> >> >> +
> >> >> +static const struct of_device_id samsung_clock_ids[] = {
> >> >> +     { .compatible = "samsung,exynos4210-clock",
> >> >> +                     .data = &exynos4210_cpuclk_match_data, },
> >> >> +     { .compatible = "samsung,exynos4412-clock",
> >> >> +                     .data = &exynos4210_cpuclk_match_data, },
> >> >> +     { .compatible = "samsung,exynos5250-clock",
> >> >> +                     .data = &exynos5250_cpuclk_match_data, },
> >> >> +};
> >> >> +
> >> >> +int __init samsung_register_arm_clock(struct device_node *np,
> >> >> +             unsigned int lookup_id, const char *parent,
> >> >> void __iomem *base) +{
> >> >> +     const struct of_device_id *match;
> >> >> +     struct samsung_cpuclk_freq_table *freq_table;
> >> >> +     const struct samsung_cpuclk_match_data *data;
> >> >> +     int ret;
> >> >> +
> >> >> +     match = of_match_node(samsung_clock_ids, np);
> >> >> +     if (!match) {
> >> >> +             pr_err("%s: could not determine soc type\n",
> >> >> __func__);
> >> >> +             return -EINVAL;
> >> >> +     }
> >> >> +
> >> >> +     data = match->data;
> >> >> +     ret = data->parser(np, &freq_table);
> >> >> +     if (ret) {
> >> >> +             pr_err("%s: error %d in parsing arm clock freq
> >> >> table",
> >> >> +                                             __func__, ret);
> >> >> +             return -EINVAL;
> >> >> +     }
> >> >> +
> >> >> +     samsung_cpuclk_register(lookup_id, "armclk", parent,
> >> >> +             &exynos4210_armclk_clk_ops, freq_table, base,
> >> >> data); +
> >> >> +     return 0;
> >> >> +}
> >> >> diff --git a/drivers/clk/samsung/clk.h
> >> >> b/drivers/clk/samsung/clk.h index 31b4174..a759330 100644
> >> >> --- a/drivers/clk/samsung/clk.h
> >> >> +++ b/drivers/clk/samsung/clk.h
> >> >> @@ -340,4 +340,7 @@ extern void __init
> >> >> samsung_clk_register_pll(struct samsung_pll_clock *pll_list,
> >> >>  extern unsigned long _get_rate(const char *clk_name);
> >> >>
> >> >> +extern int __init samsung_register_arm_clock(struct device_node
> >> >> *np,
> >> >> +             unsigned int lookup_id, const char *parent, void
> >> >> __iomem *base); +
> >> >>  #endif /* __SAMSUNG_CLK_H */
> >> >
> >> >
> >> >
> >> > --
> >> > Best regards,
> >> >
> >> > Lukasz Majewski
> >> >
> >> > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
> >
> > --
> > Best regards,
> >
> > Lukasz Majewski
> >
> > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel Devel]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Forum]     [Linux SCSI]

  Powered by Linux