[PATCH 3/3] powernow-k6: reorder frequencies

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch reorders reported frequencies from the highest to the lowest,
just like in other frequency drivers.

Signed-off-by: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Cc: stable@xxxxxxxxxx

---
 drivers/cpufreq/powernow-k6.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

Index: linux-3.12.3/drivers/cpufreq/powernow-k6.c
===================================================================
--- linux-3.12.3.orig/drivers/cpufreq/powernow-k6.c	2013-12-06 22:08:27.000000000 +0100
+++ linux-3.12.3/drivers/cpufreq/powernow-k6.c	2013-12-06 22:17:44.000000000 +0100
@@ -37,17 +37,20 @@ MODULE_PARM_DESC(bus_frequency, "Bus fre
 
 /* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
 static struct cpufreq_frequency_table clock_ratio[] = {
-	{45,  /* 000 -> 4.5x */ 0},
+	{60,  /* 110 -> 6.0x */ 0},
+	{55,  /* 011 -> 5.5x */ 0},
 	{50,  /* 001 -> 5.0x */ 0},
+	{45,  /* 000 -> 4.5x */ 0},
 	{40,  /* 010 -> 4.0x */ 0},
-	{55,  /* 011 -> 5.5x */ 0},
-	{20,  /* 100 -> 2.0x */ 0},
-	{30,  /* 101 -> 3.0x */ 0},
-	{60,  /* 110 -> 6.0x */ 0},
 	{35,  /* 111 -> 3.5x */ 0},
+	{30,  /* 101 -> 3.0x */ 0},
+	{20,  /* 100 -> 2.0x */ 0},
 	{0, CPUFREQ_TABLE_END}
 };
 
+static const u8 index_to_register[8] = { 6, 3, 1, 0, 2, 7, 5, 4 };
+static const u8 register_to_index[8] = { 3, 2, 4, 1, 7, 6, 0, 5 };
+
 static const struct {
 	unsigned freq;
 	unsigned mult;
@@ -91,7 +94,7 @@ static int powernow_k6_get_cpu_multiplie
 
 	local_irq_enable();
 
-	return clock_ratio[(invalue >> 5)&7].driver_data;
+	return clock_ratio[register_to_index[(invalue >> 5)&7]].driver_data;
 }
 
 static void powernow_k6_set_cpu_multiplier(unsigned int best_i)
@@ -111,7 +114,7 @@ static void powernow_k6_set_cpu_multipli
 	write_cr0(cr0 | X86_CR0_CD);
 	wbinvd();
 
-	outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
+	outvalue = (1<<12) | (1<<10) | (1<<9) | (index_to_register[best_i]<<5);
 
 	msrval = POWERNOW_IOPORT + 0x1;
 	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */

--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel Devel]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Forum]     [Linux SCSI]

  Powered by Linux