RE: [PATCH V2 3/4] arm/imx6q: register arm_clk as cpu to clkdev

[Mark Langsdorf <mark.langsdorf@xxxxxxxxxxx>]

Is there a portable/generic approach for other drivers that may
want to use arm-cpufreq.c? arm_clk is not normally defined for
my SoC and I don't see an easy way to pull it in.

--Mark Langsdorf
Calxeda, Inc.

________________________________________
From: Richard Zhao [richard.zhao@xxxxxxxxxx]
Sent: Friday, December 16, 2011 4:31 AM
To: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; cpufreq@xxxxxxxxxxxxxxx; devicetree-discuss@xxxxxxxxxxxxxxxx
Cc: linux@xxxxxxxxxxxxxxxx; davej@xxxxxxxxxx; kernel@xxxxxxxxxxxxxx; shawn.guo@xxxxxxxxxx; eric.miao@xxxxxxxxxx; Mark Langsdorf; linaro-dev@xxxxxxxxxxxxxxxx; patches@xxxxxxxxxx; Richard Zhao
Subject: [PATCH V2 3/4] arm/imx6q: register arm_clk as cpu to clkdev

cpufreq needs cpu clock to change frequency.

Signed-off-by: Richard Zhao <richard.zhao@xxxxxxxxxx>
---
 arch/arm/mach-imx/clock-imx6q.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index 039a7ab..72acbc2 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -1911,6 +1911,7 @@ static struct clk_lookup lookups[] = {
        _REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
        _REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
        _REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
+       _REGISTER_CLOCK(NULL, "cpu", arm_clk),
 };

 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
--
1.7.5.4--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html