[OT] Cannot boot into GUI after Video Driver is Installed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Good Day,

I am not 100% certain if here is the right place to bring this up, however
if this is the wrong place for this please redirect me to right place.

A few weeks ago I was trying to install KVM on my laptop, I bought a new
laptop and immediately after I install the nVidia drivers I receive the
following error "libfcoe_device_notification: NETDEV_UNREGISTER lo"

I spent several hours googling the error and there are several issues,
however none of them are related to my situation.

I am running CentOS 6.2
LSB Version:
:core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch
Distributor ID:    CentOS
Description:    CentOS release 6.2 (Final)
Release:    6.2
Codename:    Final

Below are some of the errors that I extracted from the logs

May 20 19:30:51 wildfire kernel: ACPI: Video Device [GFX0] (multi-head:
yes  rom: yes  post: no)
May 20 19:30:51 wildfire kernel: ------------[ cut here ]------------
May 20 19:30:51 wildfire kernel: WARNING: at fs/proc/generic.c:590
proc_register+0x129/0x220() (Not tainted)
May 20 19:30:51 wildfire kernel: Hardware name: N55SL
May 20 19:30:51 wildfire kernel: proc_dir_entry 'video/GFX0' already
registered
May 20 19:30:51 wildfire kernel: Modules linked in: i915(+) nouveau ttm
drm_kms_helper drm i2c_algo_bit i2c_core mxm_wmi wmi video output dm_mirror
dm_region_hash dm_log dm_mod
May 20 19:30:51 wildfire kernel: Pid: 192, comm: modprobe Not tainted
2.6.32-220.17.1.el6.x86_64 #1
May 20 19:30:51 wildfire kernel: Call Trace:
May 20 19:30:51 wildfire kernel: [<ffffffff81069c97>] ?
warn_slowpath_common+0x87/0xc0
May 20 19:30:51 wildfire kernel: [<ffffffff81069d86>] ?
warn_slowpath_fmt+0x46/0x50
May 20 19:30:51 wildfire kernel: [<ffffffff811e1b99>] ?
proc_register+0x129/0x220
May 20 19:30:51 wildfire kernel: [<ffffffff811e2342>] ?
proc_mkdir_mode+0x42/0x60
May 20 19:30:51 wildfire kernel: [<ffffffff811e2376>] ? proc_mkdir+0x16/0x20
May 20 19:30:51 wildfire kernel: [<ffffffffa0043d03>] ?
acpi_video_bus_add+0x239/0xff2 [video]
May 20 19:30:51 wildfire kernel: [<ffffffff811ed96c>] ?
sysfs_add_one+0x2c/0x130
May 20 19:30:51 wildfire kernel: [<ffffffff811ede98>] ?
sysfs_do_create_link+0xd8/0x170
May 20 19:30:51 wildfire kernel: [<ffffffff812c8c8c>] ?
acpi_device_probe+0x50/0x122
May 20 19:30:51 wildfire kernel: [<ffffffff81346b70>] ?
driver_probe_device+0xa0/0x2a0
May 20 19:30:51 wildfire kernel: [<ffffffff81346d70>] ?
__driver_attach+0x0/0xb0
May 20 19:30:51 wildfire kernel: [<ffffffff81346e1b>] ?
__driver_attach+0xab/0xb0
May 20 19:30:51 wildfire kernel: [<ffffffff81346d70>] ?
__driver_attach+0x0/0xb0
May 20 19:30:51 wildfire kernel: [<ffffffff81345dd4>] ?
bus_for_each_dev+0x64/0x90
May 20 19:30:51 wildfire kernel: [<ffffffff8134690e>] ?
driver_attach+0x1e/0x20
May 20 19:30:51 wildfire kernel: [<ffffffff81346210>] ?
bus_add_driver+0x200/0x300
May 20 19:30:51 wildfire kernel: [<ffffffff81347146>] ?
driver_register+0x76/0x140
May 20 19:30:51 wildfire kernel: [<ffffffff811e2342>] ?
proc_mkdir_mode+0x42/0x60
May 20 19:30:51 wildfire kernel: [<ffffffff812ca366>] ?
acpi_bus_register_driver+0x43/0x45
May 20 19:30:51 wildfire kernel: [<ffffffffa0044b03>] ?
acpi_video_register+0x47/0x74 [video]
May 20 19:30:51 wildfire kernel: [<ffffffffa01bb76d>] ?
i915_driver_load+0x79d/0x1360 [i915]
May 20 19:30:51 wildfire kernel: [<ffffffff81343e3e>] ?
device_register+0x1e/0x30
May 20 19:30:51 wildfire kernel: [<ffffffffa0081a26>] ?
drm_sysfs_device_add+0x86/0xb0 [drm]
May 20 19:30:51 wildfire kernel: [<ffffffffa007e643>] ?
drm_get_minor+0x1d3/0x310 [drm]
May 20 19:30:51 wildfire kernel: [<ffffffffa0080def>] ?
drm_get_pci_dev+0x19f/0x300 [drm]
May 20 19:30:51 wildfire kernel: [<ffffffff8126d26a>] ?
kobject_get+0x1a/0x30
May 20 19:30:51 wildfire kernel: [<ffffffffa008101e>] ?
drm_pci_init+0xce/0x130 [drm]
May 20 19:30:51 wildfire kernel: [<ffffffffa0240000>] ? i915_init+0x0/0x8d
[i915]
May 20 19:30:51 wildfire kernel: [<ffffffffa024008b>] ? i915_init+0x8b/0x8d
[i915]
May 20 19:30:51 wildfire kernel: [<ffffffff8100204c>] ?
do_one_initcall+0x3c/0x1d0
May 20 19:30:51 wildfire kernel: [<ffffffff810af891>] ?
sys_init_module+0xe1/0x250
May 20 19:30:51 wildfire kernel: [<ffffffff8100b0f2>] ?
system_call_fastpath+0x16/0x1b
May 20 19:30:51 wildfire kernel: ---[ end trace 321b976d16c917ce ]---
May 20 19:30:51 wildfire kernel: ACPI Warning: _BQC returned an invalid
level (20090903/video-626)
May 20 19:30:51 wildfire kernel: acpi device:46: registered as
cooling_device9
May 20 19:30:51 wildfire kernel: input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
May 20 19:30:51 wildfire kernel: ACPI: Video Device [GFX0] (multi-head:
yes  rom: no  post: no)
May 20 19:30:51 wildfire kernel: [drm] Initialized i915 1.6.0 20080730 for
0000:00:02.0 on minor 0
-----------------------------------output cut--------------------------

May 20 19:31:17 wildfire kernel: Bluetooth: SCO (Voice Link) ver 0.6
May 20 19:31:17 wildfire kernel: Bluetooth: SCO socket layer initialized
May 20 19:31:17 wildfire bluetoothd[2434]: HCI dev 0 registered
May 20 19:31:17 wildfire xinetd[2450]: xinetd Version 2.3.14 started with
libwrap loadavg labeled-networking options compiled in.
May 20 19:31:17 wildfire xinetd[2450]: Started working: 0 available services
May 20 19:31:17 wildfire NetworkManager[2188]: <warn>
/sys/devices/virtual/net/pan0: couldn't determine device driver; ignoring...
May 20 19:31:18 wildfire abrtd: Init complete, entering main loop
May 20 19:31:18 wildfire abrtd: Directory 'oops-2012-05-20-19:31:18-2583-0'
creation detected
May 20 19:31:18 wildfire abrt-dump-oops: Reported 1 kernel oopses to Abrt
May 20 19:31:18 wildfire abrtd: Can't open file
'/var/spool/abrt/oops-2012-05-20-19:31:18-2583-0/uid': No such file or
directory
May 20 19:31:19 wildfire qpidd[2614]: 2012-05-20 19:31:19 notice Listening
on TCP/TCP6 port 5672
May 20 19:31:19 wildfire qpidd[2614]: 2012-05-20 19:31:19 notice SSL plugin
not enabled, you must set --ssl-cert-db to enable it.
May 20 19:31:19 wildfire qpidd[2614]: 2012-05-20 19:31:19 notice Broker
running
May 20 19:31:21 wildfire libvirtd: Could not find keytab file:
/etc/libvirt/krb5.tab: No such file or directory
May 20 19:31:21 wildfire kernel: device virbr0-nic entered promiscuous mode
May 20 19:31:21 wildfire kernel: New device virbr0-nic does not support
netpoll
May 20 19:31:21 wildfire kernel: Disabling netpoll for virbr0
May 20 19:31:21 wildfire NetworkManager[2188]: <warn>
/sys/devices/virtual/net/virbr0: couldn't determine device driver;
ignoring...
May 20 19:31:21 wildfire kernel: virbr0: starting userspace STP failed,
starting kernel STP
May 20 19:31:21 wildfire NetworkManager[2188]: <warn>
/sys/devices/virtual/net/virbr0-nic: couldn't determine device driver;
ignoring...
May 20 19:31:21 wildfire avahi-daemon[2202]: Joining mDNS multicast group
on interface virbr0.IPv4 with address 192.168.122.1.
May 20 19:31:21 wildfire avahi-daemon[2202]: New relevant interface
virbr0.IPv4 for mDNS.
May 20 19:31:21 wildfire avahi-daemon[2202]: Registering new address record
for 192.168.122.1 on virbr0.IPv4.
May 20 19:31:22 wildfire dnsmasq[2786]: started, version 2.48 cachesize 150
May 20 19:31:22 wildfire dnsmasq[2786]: compile time options: IPv6
GNU-getopt DBus no-I18N DHCP TFTP
May 20 19:31:22 wildfire dnsmasq-dhcp[2786]: DHCP, IP range 192.168.122.2
-- 192.168.122.254, lease time 1h
May 20 19:31:22 wildfire dnsmasq[2786]: no servers found in
/etc/resolv.conf, will retry
May 20 19:31:22 wildfire dnsmasq[2786]: read /etc/hosts - 2 addresses
May 20 19:31:22 wildfire kernel: Ebtables v2.0 registered
May 20 19:31:24 wildfire kernel: lo: Disabled Privacy Extensions
May 20 19:31:24 wildfire kernel: libfcoe_device_notification:
NETDEV_UNREGISTER lo
May 20 19:31:27 wildfire bluetoothd[2453]: Can't init device hci0:
Connection timed out (110)
May 20 19:31:28 wildfire polkitd[3088]: started daemon version 0.96 using
authority implementation `local' version `0.96'
May 20 19:31:28 wildfire dbus: [system] Rejected send message, 1 matched
rules; type="method_call", sender=":1.26" (uid=42 pid=3077
comm="gnome-power-manager)
----------output cut-------------

May 20 19:46:16 wildfire yum[3860]: Installed:
kmod-nvidia-295.53-1.el6.elrepo.x86_64
May 20 19:46:21 wildfire yum[3860]: Installed:
nvidia-x11-drv-295.53-1.el6.elrepo.x86_64
May 20 19:47:39 wildfire yum[27268]: Installed:
fuse-ntfs-3g-2010.10.2-1.el6.rf.x86_64
May 20 19:48:06 wildfire python: gethostby*.getanswer: asked for
"1.24.168.192.in-addr.arpa IN PTR", got type "A"
May 20 19:48:06 wildfire python: gethostby*.getanswer: asked for
"1.24.168.192.in-addr.arpa IN PTR", got type "A"
May 20 19:50:00 wildfire kernel: nvidia: module license 'NVIDIA' taints
kernel.
May 20 19:50:00 wildfire kernel: Disabling lock debugging due to kernel
taint
May 20 19:50:00 wildfire kernel: nvidia 0000:01:00.0: power state changed
by ACPI to D0
May 20 19:50:00 wildfire kernel: nvidia 0000:01:00.0: power state changed
by ACPI to D0
May 20 19:50:00 wildfire kernel: nvidia 0000:01:00.0: enabling device (0000
-> 0003)
May 20 19:50:00 wildfire kernel: nvidia 0000:01:00.0: PCI INT A -> GSI 16
(level, low) -> IRQ 16
May 20 19:50:00 wildfire kernel: vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
May 20 19:50:00 wildfire kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel
Module  295.53  Fri May 11 23:28:10 PDT 2012
-------------------output cut-------------------

After I installed the nVidia drivers the nouveau drivers was automatically
blacklisted.

May 20 19:51:57 wildfire kernel: Linux version 2.6.32-220.17.1.el6.x86_64 (
mockbuild@xxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.6 20110731 (Red Hat
4.4.6-3) (GCC) ) #1 SMP Wed May 16 00:01:37 BST 2012
May 20 19:51:57 wildfire kernel: Command line: ro
root=/dev/mapper/vg_wildfire-LogVol00 nomodeset rd_NO_LUKS LANG=en_US.UTF-8
rd_NO_MD quiet SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto
rd_LVM_LV=vg_wildfire/LogVol00  KEYBOARDTYPE=pc KEYTABLE=us
rd_LVM_LV=vg_wildfire/LogVol07 rd_NO_DM nouveau.modeset=0
rdblacklist=nouveau
May 20 19:51:57 wildfire kernel: KERNEL supported cpus:
----------------output cut----------------------------

Below output from /var/log/Xorg.0.log

[    17.590]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    17.590] X Protocol Version 11, Revision 0
[    17.590] Build Operating System: c6b5 2.6.32-44.2.el6.x86_64
[    17.590] Current Operating System: Linux wildfire
2.6.32-220.17.1.el6.x86_64 #1 SMP Wed May 16 00:01:37 BST 2012 x86_64
[    17.592] Kernel command line: ro root=/dev/mapper/vg_wildfire-LogVol00
nomodeset rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD quiet
SYSFONT=latarcyrheb-sun16 rhgb
crashkernel=129M@0Mrd_LVM_LV=vg_wildfire/LogVol00  KEYBOARDTYPE=pc
KEYTABLE=us
rd_LVM_LV=vg_wildfire/LogVol07 rd_NO_DM nouveau.modeset=0
rdblacklist=nouveau
[    17.592] Build Date: 25 February 2012  04:11:35PM
[    17.592] Build ID: xorg-x11-server 1.10.4-6.el6_2.1.0.1.centos
[    17.592] Current version of pixman: 0.18.4
[    17.592]     Before reporting problems, check
http://wiki.centos.org/Documentation
    to make sure that you have the latest version.
[    17.592] Markers: (--) probed, (**) from config file, (==) default
setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.592] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 20
20:15:00 2012
[    17.598] (==) Using config file: "/etc/X11/xorg.conf"
[    17.599] (==) ServerLayout "Layout0"
[    17.599] (**) |-->Screen "Screen0" (0)
[    17.599] (**) |   |-->Monitor "Monitor0"
[    17.599] (**) |   |-->Device "Device0"
[    17.599] (**) |-->Input Device "Keyboard0"
[    17.599] (**) |-->Input Device "Mouse0"
[    17.599] (==) Automatically adding devices
[    17.599] (==) Automatically enabling devices
[    17.600] (==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
[    17.600] (**) ModulePath set to
"/usr/lib64/xorg/modules/extensions/nvidia,/usr/lib64/xorg/modules"
[    17.600] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse'
or 'vmmouse' will be disabled.
[    17.600] (WW) Disabling Keyboard0
[    17.600] (WW) Disabling Mouse0
[    17.600] (II) Loader magic: 0x7d6d20
[    17.600] (II) Module ABI versions:
[    17.600]     X.Org ANSI C Emulation: 0.4
[    17.600]     X.Org Video Driver: 10.0
[    17.600]     X.Org XInput driver : 12.2
[    17.600]     X.Org Server Extension : 5.0
[    17.604] (--) PCI:*(0:0:2:0) 8086:0116:1043:212b rev 9, Mem @
0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64, BIOS @
0x????????/131072
[    17.604] (--) PCI: (0:1:0:0) 10de:1247:1043:212b rev 161, Mem @
0xda000000/33554432, 0xc0000000/268435456, 0xd0000000/67108864, I/O @
0x0000d000/128, BIOS @ 0x????????/524288
[    17.604] (II) LoadModule: "extmod"
[    17.608] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    17.610] (II) Module extmod: vendor="X.Org Foundation"
[    17.610]     compiled for 1.10.4, module version = 1.0.0
[    17.610]     Module class: X.Org Server Extension
[    17.610]     ABI class: X.Org Server Extension, version 5.0
[    17.610] (II) Loading extension SELinux
[    17.610] (II) Loading extension MIT-SCREEN-SAVER
[    17.610] (II) Loading extension XFree86-VidModeExtension
[    17.610] (II) Loading extension XFree86-DGA
[    17.610] (II) Loading extension DPMS
[    17.610] (II) Loading extension XVideo
[    17.610] (II) Loading extension XVideo-MotionCompensation
[    17.610] (II) Loading extension X-Resource
[    17.610] (II) LoadModule: "dbe"
[    17.611] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    17.612] (II) Module dbe: vendor="X.Org Foundation"
[    17.612]     compiled for 1.10.4, module version = 1.0.0
[    17.612]     Module class: X.Org Server Extension
[    17.612]     ABI class: X.Org Server Extension, version 5.0
[    17.612] (II) Loading extension DOUBLE-BUFFER
[    17.612] (II) LoadModule: "glx"
[    17.612] (II) Loading
/usr/lib64/xorg/modules/extensions/nvidia/libglx.so
[    17.935] (II) Module glx: vendor="NVIDIA Corporation"
[    17.937]     compiled for 4.0.2, module version = 1.0.0
[    17.937]     Module class: X.Org Server Extension
[    17.937] (II) NVIDIA GLX Module  295.53  Fri May 11 23:49:08 PDT 2012
[    17.937] (II) Loading extension GLX
[    17.937] (II) LoadModule: "record"
[    17.939] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    17.940] (II) Module record: vendor="X.Org Foundation"
[    17.940]     compiled for 1.10.4, module version = 1.13.0
[    17.940]     Module class: X.Org Server Extension
[    17.940]     ABI class: X.Org Server Extension, version 5.0
[    17.940] (II) Loading extension RECORD
[    17.940] (II) LoadModule: "dri"
[    17.942] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[    17.945] (II) Module dri: vendor="X.Org Foundation"
[    17.945]     compiled for 1.10.4, module version = 1.0.0
[    17.945]     ABI class: X.Org Server Extension, version 5.0
[    17.945] (II) Loading extension XFree86-DRI
[    17.945] (II) LoadModule: "dri2"
[    17.947] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    17.949] (II) Module dri2: vendor="X.Org Foundation"
[    17.949]     compiled for 1.10.4, module version = 1.2.0
[    17.949]     ABI class: X.Org Server Extension, version 5.0
[    17.949] (II) Loading extension DRI2
[    17.949] (II) LoadModule: "nvidia"
[    17.951] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    17.965] (II) Module nvidia: vendor="NVIDIA Corporation"
[    17.966]     compiled for 4.0.2, module version = 1.0.0
[    17.966]     Module class: X.Org Video Driver
[    17.971] (II) NVIDIA dlloader X Driver  295.53  Fri May 11 23:29:56 PDT
2012
[    17.971] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    17.972] (++) using VT number 1

[    17.975] (EE) No devices detected.
[    17.975]
Fatal server error:
[    17.975] no screens found
[    17.975]
Please consult the CentOS support
     at http://wiki.centos.org/Documentation
 for help.
[    17.975] Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[    17.975]

Below is the content of the xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 302.11  (
buildmeister@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx)  Thu May 17 18:43:43
PDT 2012


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    ModulePath      "/usr/lib64/xorg/modules/extensions/nvidia"
    ModulePath      "/usr/lib64/xorg/modules"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

I removed the xorg.conf file and I am able to boot into the GUI with the
default drivers.

Below is the output from lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family
DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family
High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 4 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC
Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus
Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT
555M] (rev a1)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) (rev 01)
04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host
Controller
05:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0
Gigabit Ethernet (rev c0)

Is there anything that I can do to resolve the issue so that I am able to
use the kmod-nvidia drivers on CentOS 6.2?

Any help or guidance will be greatly appreciated.

-- 
Kind Regards
Earl Ramirez
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[CentOS]     [CentOS Announce]     [CentOS Docs]     [CentOS Virtualization]     [Linux Media]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Xfree86]     [Linux USB]     [Project Hail Cloud Computing]

Powered by Linux Add to Google