Re: Speakup with espeak

["John Heim" <jheim@xxxxxxxxxxxxx>]

----- Original Message ----- 
From: "Daniel Dalton" <daniel.dalton47@xxxxxxxxx>

> -Change defaultmodule to espeak_generic
> -also changed a default language thing from flite to espeak_generic.
> What else do I need to do?
> I reboot and hear no speech.
> Could someone maybe send me their speechd-up.conf file to me off list


It's probably not speechd-up.   To find out if the problem is with 
speech-dispatcher or with speechd-up, you can use the spd-say command.

spd-say "hello world"

Chances are that this will say nothing or perhaps even generate an error 
message. If you hear nothing, then your problem is with speech-dispatcher. I 
think you are probably the victim of a mistake in the speech-dispatcher 
config files for espeak. In 
/etc/speech-dispatcher/modules/espeak-generic.conf,  find a lline like this:

"echo \"$DATA\" | speak -w /tmp/espeak.wav -v $VOICE -s $RATE -a $VOLUME -p 
$PITCH -


And change it to say this:
"echo \"$DATA\" | espeak -w /tmp/espeak.wav -v $VOICE -s $RATE -a 
$VOLUME -p $PITCH
-

The difference between the two lines is that the first says speak and the 
second says espeak. In other words, one pipes the output from aplay to speak 
(which is wrong) and the other pipes it to espeak (which is right). Here is 
a link to a espeak-generic.conf file that works for me:
http://www.math.wisc.edu/~jheim/debian/espeak-generic.conf

Another thing that may be wrong is that you may not have installed 
alsaplayer. To do that type:

apt-get alsa-base alsa-tools alsa-utils


_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list