On Sat, Mar 01, 2008 at 10:37:48AM -0500, Jack Palmadesso wrote:
> Yesterday I set up a Promise hw raid controller in my FC8_64 system. I ended
> up returning it but before I removed it I initialized 2 drives into a RAID0
> setup. Now that the controller is gone my system is complaining about
> /dev/mapper. I ended up clearing this by booting into rescue and
> initializing the 2 drives I had setup with the controller. The system is
> happy again but when I do an fdisk -l I still show a /dev/dm-0 device. My
> question is how can I initialize the drives without booting to rescue mode ?
> And how can I get rid of the /dev/dm-0 device ?
>
> dmraid still shows the 2 devices. I've initialized and formatted both but it
> won't go away.
> # dmraid -r
> ERROR: asr: Invalid magic number in RAID table; saw 0x0, expected 0x900765C4
> on /dev/sda
> /dev/sdb: pdc, "pdc_bicfbbcgbh", stripe, ok, 312450720 sectors, data@ 0
> /dev/sdd: pdc, "pdc_bicfbbcgbh", stripe, ok, 312450720 sectors, data@ 0
See dmraid manual:
dmraid -rD /dev/ad[bd]
> _______________________________________________
> Ataraid-list mailing list
> Ataraid-list@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/ataraid-list
--
Regards,
Heinz -- The LVM Guy --
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Red Hat GmbH
Consulting Development Engineer Am Sonnenhang 11
Storage Development 56242 Marienrachdorf
Germany
Mauelshagen@xxxxxxxxxx PHONE +49 171 7803392
FAX +49 2626 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
_______________________________________________
Ataraid-list mailing list
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list
[Linux RAID]
[Linux IDE]
[Linux SCSI]
[Kernel]
[Linux Books]
[Linux Admin]
[GFS]
[RPM]
[Photos]
[Yosemite Photos]
[Yosemite News]
[AMD 64]