Re: listing drives attached to a particular controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


On Mon, Jun 11, 2007 at 02:31:03PM -0700, Gaston, Jason D wrote:
> How would you go about listing the hard drives attached to a particular
> controller?  For example, say you have a SCSI controller card w/ drives
> and an onboard SATA RAID controller in your system.  In the future,
> dmraid will have the ability to create a RAID array from the command
> line.  You may want to only add drives to the array that are attached to
> the same controller.  Otherwise, when the system boots, the RAID option
> ROM may display the RAID array as broken, as it will only see the drives
> attached to the single controller.
> 
> Should this functionally be added to the dmraid utility?  Should dmraid
> block or warn about using block devices that are attached to different
> controllers?

Seems reasonable to me.  I suppose it's possible that one could end up
in that situation while recovering a RAID array, but a warning message
would be helpful if one accidentally biffs it. :)

--D

Attachment: signature.asc
Description: Digital signature

_______________________________________________
Ataraid-list mailing list
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list

[Linux RAID]     [Linux IDE]     [Linux SCSI]     [Kernel]     [Linux Books]     [Linux Admin]     [GFS]     [RPM]     [Photos]     [Yosemite Photos]     [Yosemite News]     [AMD 64]
  Powered by Linux