[RE]Promise FastTrak66 - dmraid doesn't recognize striped array on pair of Maxto

["James Olson" <big_spender12@xxxxxxxxx>]

 Hi Bob,
I ran into a similar problem with the same controller on certain older drives.  The problem has to do with the way the fasttrak bios sees the drive size and geometry as opposed to the way linux sees it as reported by the old drive's firmware.  Normally the drive metadata sector is located on the last cylinder of the drive, about 63 sectors before the end.  Anyway you can probably get it to work if you look through the data on your drive to find out what sector the metadata is on, and then modify the dmraid source (pdc.c?) to add it to the list of sector offsets from the end of the disk to try.
   -James






> ---------[ Received Mail Content ]----------
>
>  Subject : Promise FastTrak66 - dmraid doesn't recognize striped array on pair	of Maxtor 51536U3
>
>  Date : Thu, 12 Apr 2007 21:43:15 -0700 (PDT)
>
>  From : Bob Stewart <bob@xxxxxxxxxx>
>
>  To : ataraid-list@xxxxxxxxxx
>
>
>
> The subject says it all.  I have no problem with a mixed pair
>
> of 80GB drives in a striped array, but I can't get this pair
>
> of old Maxtor 15GB drives recognized.  I know they work
>
> though, I was able to load Win2K to the array and boot it.
>
> It's not critical, but it would be nice if I could get this working.
>
>
>
> Debian Etch - custom 2.6.20.3
>
> dmraid - 1.0.0.rc13
>
> device-mapper - 4.11.0
>
>
>
> Bob
>
>
>
> _______________________________________________
>
> Ataraid-list mailing list
>
> Ataraid-list@xxxxxxxxxx
>
> https://www.redhat.com/mailman/listinfo/ataraid-list

---

Create and Share your own Video Clip Playlist in minutes at Lycos MIX (http://mix.lycos.com)

_______________________________________________
Ataraid-list mailing list
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list