Re: how to set-up Promise FastTrak TX2200

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


On Monday 16 May 2005 17:30, Hillel Bilman wrote:

> I've got a Centos4 Linux server and installed Linux on a separate drive as
> it won't see my
> 2 x 80GB harddrives connected via a Promise FastTrak TX2200 using
> mirroring.
>
> I thought I would need to recompile my kernel but there is no driver in
> kernel 2.6.9-5.0.5 for the TX2200. I checked and the dmraid rpm 1.0.0-rc5f
> is installed and the hardware is installed but
> if I type: dmraid -ay
> I get "No Software RAID disks"
> If I type: dmraid -ay -f pdc
> I get "No RAID disk with format: pdc"
>
> Would anyone be so kind as to send me a HOWTO to get Linux to pick up the
> RAID device.
>
> Any help greatly appreciated.

I use a TX2000 and found that dmraid 1.0.0-rc5f would not correctly identify 
my RAID0 set. Might be worth trying a  later dmraid revision from 
http://people.redhat.com/~heinzm/sw/dmraid/ as a starting point.

-- 
Best regards,
 Rob Hall - Red Hat Certified Engineer
 Technical Team Leader
 Newsquest Digital Media

_______________________________________________

Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list

[Linux RAID]     [Linux IDE]     [Linux SCSI]     [Kernel]     [Linux Books]     [Linux Admin]     [GFS]     [RPM]     [Photos]     [Yosemite Photos]     [Yosemite News]     [AMD 64]
  Powered by Linux